2005 Toyota Tundra Differentials

Essential 2005 Toyota Tundra Differentials

Yukon Gear – Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles (Part No.16133)

Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles

from

$461.99
Yukon standard open spider gear kit for Toyota T100 & Tacoma with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Toytoa Tacoma and T100 open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
See More

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Carrier Shim Kit For Toyota 7.5"

from

$101.99
7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:
  • Carrier shim kit
  • Fits Toyota 7.5″
See More

Yukon Gear – Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L (Part No.33024)

Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L

from

$15.99
Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:
  • Outer slinger
  • Fits 10.5″ Toyota Tundra
See More

Yukon Gear – 07 & Up Tundra & Sequoia Front Ring Gear Bolt (Part No.33071)

07 & Up Tundra & Sequoia Front Ring Gear Bolt

from

$7.99
07 & up Tundra & Sequoia front ring gear bolt..

Product Features:
  • Ring gear bolt
  • Fits 2007 and up Toyota Tundra front
See More

Dorman – Pre-Pressed Rear Axle (Part No.926-143)

Pre-Pressed Rear Axle

from

$823.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:
  • Pre-Pressed Rear Axle.
  • Pre-Pressed Rear Axle.
  • Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
  • Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
  • Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
See More

Yukon Gear – Toyota T100 & Tacoma Pinion Nut (Part No.33160)

Toyota T100 & Tacoma Pinion Nut

from

$15.99
Toyota T100 & Tacoma pinion nut.

Product Features:
  • Pinion nut
  • Fits Toyota Tacoma and T100 without factory locking differential
See More

Yukon Gear – T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm (Part No.33399)

T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm

from

$18.99
Product Features:
  • Side gear thrust washer
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – 07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L (Part No.33415)

07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L

from

$179.99
07 and up Tundra rear 10.5″ cross pin shaft W/5.7L.

Product Features:
  • Cross pin shaft
  • Fits 10.5″ Toyota Tundra
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Bearing Race Driver (Part No.56004)

Bearing Race Driver

from

$99.99
Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.

Product Features:
  • Bearing race driver
  • Fits 30025 race
  • All steel construction
See More

Yukon Gear – Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential) (Part No.13085)

Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential)

from

$399.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Toyota Tacoma and T100 without factory locking differential
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Differential Gear Install Kit (Part No.TOYV6IK)

Differential Gear Install Kit

from

$42.99


Product Features:
  • TOYOTA 8″ V6&4CLY TURBO
See More

USA Standard Gear – Master Overhaul Kit for Toyota T100 and Tacoma Rear Differential, without Factory Locker (Part No.37105)

Master Overhaul Kit for Toyota T100 and Tacoma Rear Differential, without Factory Locker

from

$489.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Toyota T100 and Tacoma without factory locker
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – 07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L (Part No.33398)

07 And Up Tundra Rear 9.5" Pinion Gear Thrust Washer With 4.0L & 4.7L

from

$12.99
07 and up Tundra rear 9.5″ pinion gear Thrust washer W/4.0L & 4.7L.

Product Features:
  • Pinion gear thrust washer
  • Fits 9.5″ Toyota Tundra
See More

Yukon Gear – Master Overhaul Kit For Toyota T100 And Tacoma Rear Differential, With O Factory Locker (Part No.14113)

Master Overhaul Kit For Toyota T100 And Tacoma Rear Differential, With O Factory Locker

from

$469.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Toyota Tacoma and T100 rear without factory locking differential
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and silicone.
See More

Corteco – Pinion Seal (Part No.J7010163867CFW)

Pinion Seal

from

$8.48
Pinion Seal

Dorman – Rear Differential Cover (Part No.926-958)

Rear Differential Cover

from

$107.99
When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Product Features:
  • Rear Differential Cover.
  • Rear Differential Cover.
  • When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
  • Direct replacement – this weld-on differential cover directly replaces a corroded original cover on certain Sequoia, Tacoma and Tundra trucks
  • Cost-effective repair – rather than buy a new axle, cut off the old cover and weld on this new one
See More

Yukon Gear – Toyota 7.5" Crush Sleeve (Part No.33115)

Toyota 7.5" Crush Sleeve

from

$16.99
Toyota 7.5″ crush sleeve, 2.185″ long.

Product Features:
  • Crush sleeve for Toyota 7.5″
  • 2.185″ tall
See More

FAE – Transfer Case Switch (Part No.J7101947097FAE)

Transfer Case Switch

from

$42.25
Transfer Case Switch

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 07 And Up Tundra Front Outer Slinger (Part No.33027)

07 And Up Tundra Front Outer Slinger

from

$32.99
07 and up Tundra front outer slinger.

Product Features:
  • Outer slinger
  • Fits 2007 and up Toyota Tundra front
See More

Driveworks – Differential Pinion Seal (Part No.S-710734)

Differential Pinion Seal

from

$19.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.11 Ratio (Part No.24619)

High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.11 Ratio

from

$403.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality.

Product Features:
  • Fits Toyota V6 rear
  • 4.11 ratio
  • 29 spline pinion
See More

Yukon Gear – Differential (Part No.26050)

Differential

from

$759.99
Differential

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

from

$6.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

2005 Toyota Tundra Differentials

Maybe you’re in the middle of a full rebuild of that 2005 Toyota Tundra. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 112 different Differentials in our inventory ranging from $5.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 2005 Toyota Tundra running smoothly.

Differentials are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Toyota Tundra. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2005 Toyota Tundra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,816 reviews in this category, some of the top rated parts include MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT with 4.9 stars and Type TLS Automatic Transmission Fluid – 1 qt with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2005 Toyota Tundra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2005 Toyota Tundra Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Toyota Tundra demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Tundra the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Front Differential Pinion Bearings categories, plus more. For a 2005 Toyota Tundra, our most popular National Differentials include:
Bearings
from $89.99
(2)
Bearings
Front Differential Pinion Bearings
Bearings
from $51.99
(1)
Bearings
Front Differential Pinion Bearings

FAQs for 2005 Toyota Tundra Differentials

What are the most purchased Differentials for the 2005 Toyota Tundra?

Out of 112 Differentials for the 2005 Toyota Tundra, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2005 Toyota Tundra Differentials?

Top-rated Differentials for your 2005 Toyota Tundra based on customer reviews/ratings are:
Type TLS Automatic Transmission Fluid - 1 qt
from $11.79
(2)
Type TLS Automatic Transmission Fluid – 1 qt
“Good product. Will buy again.”
Toyota 7.5 Pinion Nut
from $9.99
(1)
Toyota 7.5 Pinion Nut
“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff. The casting was not as good as original, it had ripples on the mounting ”