2005 Toyota Corolla Ignition Coils and Boots

Essential 2005 Toyota Corolla Ignition Coils and Boots

NGK – Spark Plug Wire Set: Variable Pitch Magnetic Core, Lifetime Warranty (Part No.8143)

Spark Plug Wire Set: Variable Pitch Magnetic Core, Lifetime Warranty

from

$145.99
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK variable pitch magnetic core cables produce the necessary impedance to suppress interference throughout the entire frequency spectrum for exceptional EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-4161)

Spark Plug Wire Set: Carbon Core, 6 Wire Set

from

$76.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

NGK – Ignition Wire Set (Part No.F102088196NGK)

Ignition Wire Set

from

$46.89
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More

NGK – NGK Wire Set (Part No.51173)

NGK Wire Set

from

$49.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

NGK – Coil on Plug Boot (Part No.59018)

Coil on Plug Boot

from

$7.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

DENSO – COP Boots-4 (Part No.671-4318)

COP Boots-4

from

$42.49
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.55579)

Spark Plug Wire Set

from

$27.49
Spark Plug Wire Set

YEC – Direct Ignition Coil – (Coil on Plug) (Part No.F3005147769YEC)

Direct Ignition Coil - (Coil on Plug)

from

$67.56
The YEC Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

World Source One – Direct Ignition Cassette (Part No.F3005147769WSO)

Direct Ignition Cassette

from

$74.51
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:
  • OE-Equivalent and a direct fit application
  • Superior, reliable performance compared to competitive products
  • Lower cost alternative to original equipment
  • No additional time consuming steps needed for installation
  • Factory original equipment connectors
  • Improved coil efficiency reduces the need to generate excessive high voltage
  • Designed to provide durability and performance
  • Noise abatement technology to eliminate audible coil noise
  • Lower primary inductance provides high-speed performance
  • Maximum available voltage under all operating conditions
  • TS 16949 Certification
See More

DENSO – First Time Fit Direct Ignition Coil – (Coil on Plug) (Part No.F3005748916ND)

First Time Fit Direct Ignition Coil - (Coil on Plug)

from

$115.99
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Accel – Coil:Cop Toyota (Part No.140314)

Coil:Cop Toyota

from

$71.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils

Product Features:
  • High temp epoxy resists shock and vibration
  • Advanced bobbin technology
  • Installation usually in less than an hour
  • Direct OEM replacement
  • OBD II compatible – will not trip a code
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1828)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$59.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – First Time Fit Direct Ignition Coil – (Coil on Plug) (Part No.F3005410235ND)

First Time Fit Direct Ignition Coil - (Coil on Plug)

from

$126.51
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1531)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$39.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Dorman – Ignition Coil Connector (Part No.645-940)

Ignition Coil Connector

from

$19.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Electrical Connector (Part No.PT914)

Electrical Connector

from

$54.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1300)

Original Equipment Quality Direct Ignition Coil

from

$113.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1305)

Original Equipment Quality Direct Ignition Coil

from

$111.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1309)

Original Equipment Quality Direct Ignition Coil

from

$141.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1308)

Original Equipment Quality Direct Ignition Coil

from

$81.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

2005 Toyota Corolla Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 2005 Toyota Corolla. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 17 different Ignition Coils and Boots in our inventory ranging from $7.99 to $251.99. That means you can find the exact parts or products you need to keep that 2005 Toyota Corolla running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Toyota Corolla. Carquest, Driveworks, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 2005 Toyota Corolla, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 56 reviews in this category, some of the top rated parts include Original Equipment Quality Direct Ignition Coil with 5.0 stars and Direct Ignition Coil – (Coil on Plug) with 5.0 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2005 Toyota Corolla rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 2005 Toyota Corolla Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Toyota Corolla demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Corolla the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Dorman Ignition Coils and Boots

We carry Dorman parts in our stock across Ignition Coil Connectors categories, plus more. For a 2005 Toyota Corolla, our most popular Dorman Ignition Coils and Boots include:
Ignition Coil Connector
from $19.99
(3)
Ignition Coil Connector
Ignition Coil Connectors

Top 2005 Toyota Corolla Ignition Coils and Boots from Driveworks

Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 2005 Toyota Corolla. Popular Driveworks parts include:
Coil on Plug Coil
from $83.05
(14)
Coil on Plug Coil
Ignition Coils

FAQs for 2005 Toyota Corolla Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 2005 Toyota Corolla?

Out of 17 Ignition Coils and Boots for the 2005 Toyota Corolla, the most popular in our inventory are:
Ignition Coil: Meets OE Specifications, 1 Count
from $77.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $85.99
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Coil on Plug Boot
from $7.99
This product is not rated
Coil on Plug Boot
Ignition Coil Boots

What are the top-rated 2005 Toyota Corolla Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 2005 Toyota Corolla based on customer reviews/ratings are:
Original Equipment Quality Direct Ignition Coil
from $111.99
(1)
Original Equipment Quality Direct Ignition Coil
“OEM ignition coils for the 2ZZGE”
Direct Ignition Coil - (Coil on Plug)
from $67.56
(1)
Direct Ignition Coil – (Coil on Plug)
“These last a lot longer than the regular kind. Also an American made product”