2005 Suzuki Forenza Suspension Parts

Below you will find various in-demand Suzuki Suspension Parts, components and accessories for your 2005 Forenza. Advance Auto Parts has popular Forenza parts like Coil and Leaf Springs, Shocks and Struts, Trailing Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Forenza model years including 2004, 2006, 2007, 2008 and more. Select a category of 2005 Suzuki Forenza Suspension Parts below and start saving instantly.

Popular 2005 Suzuki Forenza Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Front and Rear Shock or Strut Kits

Suspension Strut Bumper and Bellows Kits

Lower Control Arms

Shock Boots, Levelers, and Accessories

Trailing Arms

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Lateral Arms

Suspension Strut Hardware Kits

Essential Suspension Parts for 2005 Suzuki Forenzas

from

$145.66

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$131.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$73.90

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$119.99

Quick Strut

from

$234.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets (where applicable)
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$43.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$18.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$35.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$43.02

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$29.34

Strut Mount

from

$125.34

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$239.99

Quick Strut Kit

from

$28.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$29.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$242.99

Quick Strut Kit

from

$42.49

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$42.49

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$12.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Upgrade your 2005 Suzuki Forenza with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2005 Suzuki Forenza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Suzuki or enhancing its overall performance, Suspension Parts are key to keeping your Forenza functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Suspension Parts for the 2005 Suzuki Forenza, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2005 Suzuki Forenza at great prices. Our Suspension Parts inventory for this model ranges from just $10.14 to $356.99, with an average price of $101.99. Our 46 Suspension Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2005 Suzuki Forenza without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Suzuki Forenza, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Moog, Driveworks, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Suspension Parts available starting at $11.99, and at an average 4 stars rating. With 1,476 customer reviews and counting, our 2005 Suzuki Forenza Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Suzuki Forenza is always ready to roll. We’re committed to providing you with everything you need to keep your Forenza in top shape, all in one place. Start shopping confidently below for your 2005 Suzuki Forenza!

Best-Selling Coil and Leaf Springs for 2005 Suzuki Forenzas

Enhance the driving experience in your Suzuki with 8 quality Coil and Leaf Spring components, starting at $119.99.

show more show less

from

$168.99

Carquest complete strut assemblies include all the components required for strut replacement. The Carquest strut assembly has been rigorously quality-tested, providing high-quality, proven reliability and reducing installation time. The Carquest strut assembly has been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$234.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets (where applicable)
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$234.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets (where applicable)
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$169.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$152.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$123.99

Quick Strut

from

$119.99

Quick Strut

from

$119.99

Quick Strut

Most Popular 2005 Suzuki Forenza Shocks and Struts

Customize your Suzuki with 27 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Mounts, all priced under $356.99.

show more show less

from

$11.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$35.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$131.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$18.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$131.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$34.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$32.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$239.99

Quick Strut Kit

from

$168.99

Premium quality, U.S. grade steel, corrosion resistant coil spring.
NOK seals, steel piston valves, hard-chromed piston rod and premium oil.
Urethane rubber molded boot kit & bumper.
OEM quality upper strut mount, bearing plate and brackets.
Ready to install. Save time, eliminating installation processes like removing coil springs.
An economical replacement alternative to ensure a complete repair. Save money from investing in expensive spring compressors.

from

$31.53

STRUT BELLOW

from

$43.02

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$356.99

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$181.48

TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.

Product Features:

All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
Rod Displaced Valving – Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
Twin Tube Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
Hardened and Chrome Plated Piston Rod – Long service life.
Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
Unique Rod Guide Single Lip Seal – Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
Special Dust Boot/Jounce Bumper – Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. (Dust Boot and Jounce bumper sold separately)

from

$169.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$152.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$145.66

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$143.58

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$125.40

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$125.34

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$123.99

Quick Strut

from

$80.36

Strut Assembly

from

$42.76

Strut Mount

from

$31.23

STRUT BELLOW

from

$29.34

Strut Mount

from

$24.77

The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$17.15

The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$10.14

Strut Bellow

Top Picks for 2005 Suzuki Forenza Trailing Arms

Upgrade Suzuki Forenzas with top-quality Trailing Arms parts, including 1 OEM and aftermarket selections for your 2005 model.

show more show less

from

$43.99

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

In-Demand Control Arms for 2005 Suzuki Forenzas

Select from 4 premium Control Arms parts for your 2005 Suzuki Forenza, with prices ranging from $12.99 to $147.59.

show more show less

from

$147.59

Control Arm

from

$42.49

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$42.49

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$12.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Sold 2005 Suzuki Forenza Air Suspension and Kits

Explore our best-selling Suzuki parts for the 2005 Forenza among 6 OEM and aftermarket options starting from $20.52.

show more show less

from

$36.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$28.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$29.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$242.99

Quick Strut Kit

from

$73.90

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$20.52

Strut Mount

Top-Rated Suspension Parts Brands For Your 2005 Suzuki Forenza

Shop for the best-rated brands offering Suspension Parts and other products for your 2005 Suzuki Forenzas. Below you’ll find some of our best rated Suspension Parts from Valvoline, Moog, and Driveworks, and more. Suspension Parts from these brands that fit a 2005 Forenza start at just $11.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2005 Suzuki Forenza Suspension Parts

When it comes to maintaining or upgrading your 2005 Suzuki Forenza, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2005 Suzuki Forenza. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Moog 2005 Suzuki Forenza Suspension Parts

Moog auto parts is one of the highest quality Suspension Part brands in the market. Any 2005 Suzuki Forenza owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2005 Forenza, Advance Auto Parts carries a full inventory of 2 Moog Suspension Parts. Plus you will be keeping your Suzuki in peak condition while saving money because prices on these Moog Suspension Parts range from $34.99 to $35.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$34.99

(12)

Strut Bellows

“Worked as designed”

from
$35.99

(10)

Strut Bellows

“worked”

FAQs for 2005 Suzuki Forenza Suspension Parts

Which Suspension Parts are best-sellers for 2005 Suzuki Forenzas?

Out of 46 Suspension Parts that fit 2005 Suzuki Forenzas, the following parts are the top sellers:

Strut Bellow (11049894) – $11.99
Strut Bellows (20518181) – $34.99
Strut Bellows (20518180) – $35.99

What’s the price range for 2005 Suzuki Forenza Suspension Parts?

Suspension Part prices for the 2005 Suzuki Forenza start at $10.14 and go up to $356.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2005 Suzuki Forenza?

The average price for Suspension Parts for the 2005 Suzuki Forenza is $101.99. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Suzuki Forenza model years?

Yes, we currently carry Suspension Parts for 4 model years of Suzuki Forenzas between 2004 and 2008. Suspension Parts are bought most frequently for the following model years: 2008, 2007, 2006, and 2004.

What are the cheapest Suspension Parts for my 2005 Suzuki Forenza?

The cheapest 2005 Suzuki Forenza Suspension Parts we carry in stock are:

Strut Bellow (12601914) – $10.14
Strut Bellow (11049894) – $11.99
Suspension Control Arm Bushing (50212006) – $12.99
Strut Mount (11484788) – $17.15
Jounce Bumper and Bellows (19170663) – $18.99

What are the top-rated Suspension Parts that fit the 2005 Suzuki Forenza?

Out of 1,476 reviews by customers, our 2005 Suzuki Forenza Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2005 Suzuki Forenza and their top-rated products:

Shocks and Struts
- OESpectrum Strut (10100744) – $131.99
- Strut Bellows (20518180) – $35.99
- Strut Bellow (11049894) – $11.99

What types of Suspension Parts do you sell for my 2005 Suzuki Forenza?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2005 Suzuki Forenza:

Can I get help with 2005 Suzuki Forenza Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Suzuki Suspension Parts and more.

What is your return policy for Suzuki Forenza Suspension Parts?

Advance Auto Parts keeps returns simple. For new Suzuki Forenza Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Suzuki Forenza Suspension Parts

KYB – Excel-G Strut Assembly (Part No.L3000383504KYB)

Monroe – OESpectrum Strut (Part No.72449)

KYB – STRUT MOUNTING KIT (Part No.L3033572748KYB)

Suncore – Quick Strut (Part No.55S15301)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-814414)

Dorman – Suspension Trailing Arm (Part No.524-328)

KYB – Jounce Bumper and Bellows (Part No.SB101)

MOOG – Strut Bellows (Part No.K90461)

KYB – Strut Mount (Part No.L3030847725KYB)

International Suspension Group – Strut Mount (Part No.L3030303950ISG)

KYB – Excel-G Strut Assembly (Part No.L3000383466KYB)

Suncore – Quick Strut Kit (Part No.2-55S15301-001)

Monroe – Strut-Mate Strut Boot Kit (Part No.63640)

Monroe – Strut-Mate Strut Boot Kit (Part No.63632)

Suncore – Quick Strut Kit (Part No.2-55S11423-001)

Dorman – Lateral Arm (Part No.522-789)

Dorman – Lateral Arm (Part No.522-790)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Dorman – Suspension Control Arm Bushing (Part No.533-710)

Carquest Premium – Complete Strut Assembly (Part No.18-816644)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-814414)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-814413)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.816643)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.814413)

Suncore – Quick Strut (Part No.55S11424)

Suncore – Quick Strut (Part No.55S15302)

Suncore – Quick Strut (Part No.55S15301)

Driveworks – Strut Bellow (Part No.DW-K90460)

MOOG – Strut Bellows (Part No.K90461)

Monroe – OESpectrum Strut (Part No.72448)

KYB – Jounce Bumper and Bellows (Part No.SB101)

Monroe – OESpectrum Strut (Part No.72449)

MOOG – Strut Bellows (Part No.K90460)

KYB – Jounce Bumper and Bellows (Part No.SB102)

Suncore – Quick Strut Kit (Part No.2-55S15301-001)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-816643)

KYB – STRUT BELLOW (Part No.L303734949KYB)

KYB – Strut Mount (Part No.L3030847725KYB)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172448)

Monroe – OESpectrum Strut Assembly (Part No.L3000570051MNR)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.816644)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.814414)

KYB – Excel-G Strut Assembly (Part No.L3000383504KYB)

KYB – Excel-G Strut Assembly (Part No.L3000383503KYB)

KYB – Excel-G Strut Assembly (Part No.L3000383465KYB)

KYB – Excel-G Strut Assembly (Part No.L3000383466KYB)

Suncore – Quick Strut (Part No.55S11423)

Autopart International Inc – Strut Assembly (Part No.L3000652171API)

International Suspension Group – Strut Mount (Part No.L3030567093ISG)

KYB – STRUT BELLOW (Part No.L303734950KYB)

International Suspension Group – Strut Mount (Part No.L3030303950ISG)

First Equipment Quality – Strut Mount (Part No.L3030567093FEQ)

First Equipment Quality – Strut Mount (Part No.L3030303950FEQ)

Autopart International Inc – Strut Bellow (Part No.L30372688178API)

Dorman – Suspension Trailing Arm (Part No.524-328)

Autopart International Inc – Control Arm (Part No.L20002020145API)

Dorman – Lateral Arm (Part No.522-790)

Dorman – Lateral Arm (Part No.522-789)

Dorman – Suspension Control Arm Bushing (Part No.533-710)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Monroe – Strut-Mate Strut Boot Kit (Part No.63640)

Monroe – Strut-Mate Strut Boot Kit (Part No.63632)

Suncore – Quick Strut Kit (Part No.2-55S11423-001)

KYB – STRUT MOUNTING KIT (Part No.L3033572748KYB)

Autopart International Inc – Strut Mount (Part No.L30303157706API)