2005 Saab 9-7X Catalytic Converters

Exh. Man. to Pipe Ga

Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
• HEAT RESISTANT — Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER — Use premium Walker┬« accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
• HEAT RESISTANT — Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5451305. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49650. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006-2009 Chevrolet Trailblazer, 2007-2009 GMC Envoy, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49191. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2002-2005 Chevrolet Trailblazer, 2002-2005 GMC Envoy, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5551206. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93496. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006-2009 Chevrolet Trailblazer, 2007-2009 GMC Envoy, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23967. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2002-2005 Chevrolet Trailblazer, 2002-2005 GMC Envoy, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter