2005 Pontiac Vibe Brake Rotors and Drums
More 2005 Pontiac Vibe Brake Rotors and Drums
Find your specific 2005 Pontiac Vibe original or aftermarket Brake Rotors and Drums below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2005 Pontiac Vibe Brake Rotors and Drums
Carquest Wearever – Brake Drum (Part No.YH140747)
from
$63.99
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.
Product Features:
See More
Product Features:
- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE based design for OE form, fit, and function
- Proper harmonic design and balance helps to reduce brake noise
- Optimal metallurgy and casting thickness to preventing warping
- Ready for immediate “out-of-the-box” installation (after cleaning)
ACDelco – Brake Drum (Part No.N2000593944ACD)
from
$87.31
Brake Drum
Carquest Wearever – Brake Drum – Rear (Part No.YH140764)
from
$64.99
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.
Product Features:
See More
Product Features:
- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
- OE design to dissipate heat, increasing brake shoe life.
- Proper harmonic design and balance helps to reduce brake noise.
- Optimal metallurgy and casting thickness to preventing warping
- Ready for immediate “out-of-the-box” installation (after cleaning) Advance Auto Parts Drum Tips:
- Recommended using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
- Always use a torque wrench to tighten wheel bolts to the manufacturers” specifications to prevent pedal pulsation.
- Always replace drums in pairs to improve stopping power.
Carquest Wearever – Misc Brake part (sold by each) (Part No.3013240)
from
$0.33
Brakes are designed as a system and all the parts need to work together for best performance. The Dust Hole Cover covers the brake adjustment slot from debris to keep your brakes running smoothly.
Product Features:
See More
Product Features:
- Keeps out dirt and debris
- Direct replacement for a proper fit
- OE Fit and Function
- Maintains proper seal
Carquest Wearever – Drum Brake Hardware Combi-Kit (Part No.1456-2)
from
$1.99
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.
Product Features:
See More
Product Features:
- Manufactured to restrain high tolerances with quality materials
- Increases the Life Span and Improves the Performance of the Drum Brakes
- Coated to eliminate heat and corrosion deterioration
- Restores brakes to like-new performance
- This part matches Original Equipment (OE) quality specifications
Carquest Platinum Painted – Painted Rotor (Part No.YH275065P)
from
$57.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor (Part No.YH275064)
from
$46.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Advics – Coated High Carbon Brake Disc (Rotor) (Part No.N1000301782ADV)
from
$92.91
ADVICS’s USA manufactured rotors are constructed with expert machining to achieve tight, precise tolerances that eliminate judders, vibration, distortion and assure smoother stops. ADVICS’s uses their extensive OE manufacturing expertise to manufacture safe and effective rotors. Advics proprietary rotor designs allow the air to flow freely inside the rotors with the vanes creating a suction that removes hot air and gasses. The USA manufactured rotors are constructed using the same materials and processes as the Advics Original Equipment rotors found on Lexus, Toyota and other well known vehicle brands.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement.
- Formulated and engineered to provide high heat dissipation for maximum friction and overall braking performance.
- High carbon evenly distributed through steel for consistent heat diffusion and better fade.
- High Temperature tolerance ensures thermal stability and optimized friction characteristics for durability and long-life.
- Expert machining.
Carquest Wearever – Brake Rotor (Part No.YH145293)
from
$62.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor (Part No.YH275065)
from
$55.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH275065C)
from
$70.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000279067WBC)
from
$49.04
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)
from
$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Fast and efficient replacement
- Eliminates heat and corrosion deterioration
Carquest Platinum Painted – Brake Rotor Meets or Exceeds OE Design, Features RotorShield Protection (Part No.YH274911P)
from
$72.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH145713C)
from
$92.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH145294C)
from
$99.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000173561WBC)
from
$65.39
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:
See More
Product Features:
- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment – G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
- 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
Carquest Platinum Painted – Painted Rotor (Part No.YH145713P)
from
$82.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Advics – Coated High Carbon Brake Disc (Rotor) (Part No.N1000173561ADV)
from
$91.29
ADVICS’s USA manufactured rotors are constructed with expert machining to achieve tight, precise tolerances that eliminate judders, vibration, distortion and assure smoother stops. ADVICS’s uses their extensive OE manufacturing expertise to manufacture safe and effective rotors. Advics proprietary rotor designs allow the air to flow freely inside the rotors with the vanes creating a suction that removes hot air and gasses. The USA manufactured rotors are constructed using the same materials and processes as the Advics Original Equipment rotors found on Lexus, Toyota and other well known vehicle brands.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement.
- Formulated and engineered to provide high heat dissipation for maximum friction and overall braking performance.
- High carbon evenly distributed through steel for consistent heat diffusion and better fade.
- High Temperature tolerance ensures thermal stability and optimized friction characteristics for durability and long-life.
- Expert machining.
Advics – Coated High Carbon Brake Disc (Rotor) (Part No.N1000438423ADV)
from
$97.91
ADVICS’s USA manufactured rotors are constructed with expert machining to achieve tight, precise tolerances that eliminate judders, vibration, distortion and assure smoother stops. ADVICS’s uses their extensive OE manufacturing expertise to manufacture safe and effective rotors. Advics proprietary rotor designs allow the air to flow freely inside the rotors with the vanes creating a suction that removes hot air and gasses. The USA manufactured rotors are constructed using the same materials and processes as the Advics Original Equipment rotors found on Lexus, Toyota and other well known vehicle brands.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement.
- Formulated and engineered to provide high heat dissipation for maximum friction and overall braking performance.
- High carbon evenly distributed through steel for consistent heat diffusion and better fade.
- High Temperature tolerance ensures thermal stability and optimized friction characteristics for durability and long-life.
- Expert machining.
Carquest Platinum Plus – Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection (Part No.YH274911C)
from
$82.99
Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.
Product Features:
See More
Product Features:
- Engineered to withstand 120 hours of salt spray testing
- Zinc and aluminum anti-corrosion coating maintains a like-new appearance
- Manufactured to exacting quality and dimensional specifications for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for decreased break-in time and reduced brake noise
- Brand may vary by location
Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N1000173561BOS)
from
$75.16
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit replacement
- Prevent rust and corrosion with clear-look coating protection
- Provide a clean look for today’s open-wheeled vehicles
- Are 100% balanced for smooth operation
- Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
Carquest Wearever – Brake Rotor (Part No.YH145294)
from
$83.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Carquest Wearever – Brake Rotor YH145713: Front, Meets or Exceeds OE Design (Part No.YH145713)
from
$77.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE design for superior stopping power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Matches OE vane size for proper cooling
- Optimal metallurgy and casting thickness to preventing warping
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break-in time
Popular 2005 Pontiac Vibe Brake Rotors and Drums Categories
2005 Pontiac Vibe Brake Rotors and Drums
Maybe you’re in the middle of a full rebuild of that 2005 Pontiac Vibe. Maybe you just need a couple of Brake Rotors and Drums. Either way, Advance Auto Parts has 13 different Brake Rotors and Drums in our inventory ranging from $0.33 to $99.99. That means you can find the exact parts or products you need to keep that 2005 Pontiac Vibe running smoothly.
Brake Rotors and Drums are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Pontiac Vibe. Carquest, Carquest Platinum Plus, and WBR are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Rotors and Drums for your 2005 Pontiac Vibe, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 562 reviews in this category, some of the top rated parts include Brake Drum – Rear with 1.0 stars and Drum Brake Hardware Combi-Kit with 5.0 stars.
So if you’re in the market for aftermarket Brake Rotors and Drums to keep your 2005 Pontiac Vibe rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Rotors and Drums Brands To Make Your 2005 Pontiac Vibe Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Pontiac Vibe demands trusted brand parts and products to keep it running. Many trusted brands of Brake Rotors and Drums make up Advance Auto Parts’ inventory, and all are ready to help make your Vibe the best it can be. Be sure to browse some of our top Brake Rotors and Drums brands and parts.
Popular WBR Coated Brake Rotors and Drums
We carry WBR Coated parts in our stock across Front Brake Rotors categories, plus more. For a 2005 Pontiac Vibe, our most popular WBR Coated Brake Rotors and Drums include:
Top 2005 Pontiac Vibe Brake Rotors and Drums from Carquest Wearever
Carquest Wearever products are another trusted brand when it comes to Brake Rotors and Drums for your 2005 Pontiac Vibe. Popular Carquest Wearever parts include:
FAQs for 2005 Pontiac Vibe Brake Rotors and Drums
What are the most purchased Brake Rotors and Drums for the 2005 Pontiac Vibe?
Out of 13 Brake Rotors and Drums for the 2005 Pontiac Vibe, the most popular in our inventory are:
from
$99.99
(6)
Coated Brake Rotor: Meets or Exceeds OE Design, Enhanced Rust Protection
Front Brake Rotors
from
$61.30
This product is not rated
Run-True Metallurgic-Gray Coated Brake Disc (Rotor)
Rear Brake Rotors
What are the top-rated 2005 Pontiac Vibe Brake Rotors and Drums?
Top-rated Brake Rotors and Drums for your 2005 Pontiac Vibe based on customer reviews/ratings are:
from
$64.99
(3)
Brake Drum – Rear
“This product does not fit on my 2004 Pontiac Vibe. The drum has a rise at the lug holes that do not give enough thread count to install the wheel. N”
