2005 Pontiac GTO Performance and Racing Products

Essential 2005 Pontiac GTO Performance and Racing Products

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5920)

Ultra Seal: Exhaust Gasket Set

from

$45.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-temperature steel core/graphite faced exhaust material
  • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
  • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
  • Conforms to and seals minor surface irregularities
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Anti-Stick Properties
  • Easy Removal For Disassembly
See More

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.57-3053)

Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter

from

$349.99
The K&N 57-3053 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Pontiac GTO models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3053 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, a ratchet set and a couple of wrenches.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Energy Suspension – Hyper-Flex System (Part No.3.18134R)

Hyper-Flex System

from

$337.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)

PERFORMANCE OIL PAN GASKET SET

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5211R)

Sway Bar Bushing Set

from

$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

B & M – Automatic Shifter, Sport Shifter (Part No.80776)

Automatic Shifter, Sport Shifter

from

$329.99
The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.

Product Features:
  • Base Trims For Custom Fit
  • Neutral Safety Switch
  • Backup Light Switch
  • Lighted Gear Indicator
  • Black T-Handle and Cable
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5210G)

Sway Bar Bushing Set

from

$16.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – End Link Bushing Set (Part No.9.8161G)

End Link Bushing Set

from

$16.99
Get real performance for both on the road and off. Popular performance car, truck and SUV applications. A real must for competition use – or just for that seat-of-the-pants fun. Increases vehicle stability and control as well as durability. Reduces wheel hop and traction loss. Proven for many years, by both professional and amateur racers alike. Both restores and improves better than new. Made of Energy’s Hyper-Flex performance polyurethane. Heavy duty metal components are used for increased strength, when applicable.

Product Features:
  • Easy to Install
  • Increase Efficiency
  • Superior Performance and Greater Longevity
  • Last Much Longer Than OEM Rubber End Links
See More

NOS/Nitrous Oxide Systems – LS2 Injector Plate (Part No.13435NOS)

LS2 Injector Plate

from

$391.99
Assure a steady, precise metered flow of nitrous and fuel for reliability. Backed with years of laboratory research, as well as dyno and drag strip testing. NOS Injector Plates are available for those who want to build their own system or upgrade their current nitrous system without having to go through the expense of a new complete system. Unless specified, NOS Injector plates incorporate a low profile 1/2 inch thick design and are constructed of solid billet or die cast aluminum with a durable black finish. Included are all applicable gaskets, studs, jets and plumbing.

Product Features:
  • Convert Existing Nitrous Kit To New Technology
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3168G)

Control Arm Bushing Set

from

$57.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3117R)

Control Arm Bushing Set

from

$107.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3187R)

Control Arm Bushing Set

from

$48.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3188R)

Control Arm Bushing Set

from

$71.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

SCT Performance – X4 Performance Programmer (Part No.7416)

X4 Performance Programmer

from

$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:
  • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
  • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
  • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
  • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
  • Full color LCD display
  • High-speed data logging/monitoring
  • Dual analog inputs
  • Most popular vehicles supported
  • Installs quickly and easily
  • Easy restoration back to stock
  • User adjustable vehicle parameters
  • USB Interface cable included
  • Product might not be available in all states due to local laws.
See More

Motive Gear – Differential Mini Spool (Part No.MS12C)

Differential Mini Spool

from

$108.99


Product Features:
  • MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430
See More

Richmond Gear – MiniSpool (Part No.78-1230-1)

MiniSpool

from

$151.99
MiniSpool

Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)

Water Pump for Pontiac, Standard Rotation in Black Finish

from

$385.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.50 in. Block To Hub Height
  • Black Finish
See More

Edelbrock – Replacement Water Pump Cartridge for 1997-04 GM LS1/LS6 Gen III (Part No.8897)

Replacement Water Pump Cartridge for 1997-04 GM LS1/LS6 Gen III

from

$232.99
Edelbrock #8897 Water Pump gm gen III ls1 & gen iv ls, replacement insert ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super

Product Features:
  • Standard Impeller Rotation
  • Replacement Insert
  • Service Part
  • For Part Number 8896
  • Satin Finish
See More

Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)

VALVE SPRINGS, 1.310" BEEHIVE 1 ST

from

$594.99
With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

Product Features:
  • Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
  • O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
  • Designed for hydraulic roller cams
  • .625″ maximum lift, 1.310″ O.D.
  • Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
See More

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT

from

$592.99
This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats

Product Features:
  • Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
  • Kits designed for hydraulic roller cams
  • .625″ maximum lift springs
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – Tstat (Part No.6368)

Tstat

from

$31.99
Designed to open at 180 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:
  • Opens sooner than stock at 180 degrees
  • High flow design for performance applications
  • Includes rubber o-ring seal/gasket
  • Incorporates pressure relief valve
See More

Energy Suspension – Sub-Frame Bushing Set (Part No.3.4125R)

Sub-Frame Bushing Set

from

$159.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Sub-Frame Bushing Set (Part No.3.4164R)

Sub-Frame Bushing Set

from

$154.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Energy Suspension – Sub-Frame Bushing Set (Part No.3.4164G)

Sub-Frame Bushing Set

from

$154.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Edelbrock – RPM-Link Adjustable True-Roller Timing Chain Set (Part No.7343)

RPM-Link Adjustable True-Roller Timing Chain Set

from

$193.99
Edelbrock part #7343 RPM-Link adjustable true-roller timing chain Set now, you can dial-in your camshaft with ease with our RPM-Link Roller Timing Chain Set. RPM-Link timing chain bolt onto your engine just like any other timing chain set, so there’s no m

Product Features:
  • Keyway Adjustable
  • Single Roller Timing Chain Type
  • Induction Hardened Billet Steel Material
  • No Machining Required
  • No Special Offset Bushings Needed For Installation
See More

2005 Pontiac GTO Performance and Racing Products

You count on your 2005 Pontiac GTO to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 29 Performance and Racing Products ranging in price from $16.99 to $594.99, you’re sure to find everything you need for your 2005 Pontiac GTO.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 9 different brands like Mr. Gasket, Energy Suspension, and SCT Performance. 2005 Pontiac GTO Performance and Racing Products start as low as $16.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 20 extensive product reviews on 2005 Pontiac GTO Performance and Racing Products.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2005 Pontiac GTO below to get started!

Top-Rated Performance and Racing Products Brands For Your 2005 Pontiac GTO

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Pontiac GTO running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Energy Suspension, SCT Performance, and even more.

Popular B & M Performance and Racing Products

You’ll find popular B & M brand products across Performance Shifters. All are waiting to get your 2005 Pontiac GTO back on the road. Some of the top-rated B & M products in these categories are:
Automatic Shifter, Sport Shifter
from $329.99
(1)
Automatic Shifter, Sport Shifter
Performance Shifters
Automatic Shifter, Megashifter
from $479.99
(1)
Automatic Shifter, Megashifter
Performance Shifters
Automatic Shifter, Unimatic Shifter
from $269.99
(3)
Automatic Shifter, Unimatic Shifter
Performance Shifters

Top-Rated Performance and Racing Products


If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 2005 Pontiac GTO, and some of our most reviewed parts include:
VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT
from $592.99
(15)
VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT
Performance Engine Valve Springs

FAQs for 2005 Pontiac GTO Performance and Racing Products

What are the most purchased Performance and Racing Products for the 2005 Pontiac GTO?

Out of 29 Performance and Racing Products for the 2005 Pontiac GTO, the most popular in our inventory are:
Tstat
from $31.99
This product is not rated
Tstat
Performance Engine Coolant Thermostats
Mls Exhaust Gasket
from $49.49
This product is not rated
Mls Exhaust Gasket
Performance Exhaust Manifold Gaskets
Sway Bar Bushing Set
from $30.99
This product is not rated
Sway Bar Bushing Set
Performance Sway Bar Bushings