2005 Peterbilt 387 Belts and Hoses
Find Your Specific 2005 Peterbilt 387 Belts and Hoses
Below you will find various in-demand Peterbilt Belts and Hoses, components and accessories for your 2005 387. Advance Auto Parts has popular 387 parts like Radiator Hoses, Serpentine and V Belts, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other 387 model years including
2002,
2003,
2004,
2006,
2007,
2008,
2009,
2010,
2011 and more. Select a category of 2005 Peterbilt 387 Belts and Hoses below and start saving instantly.
Popular 2005 Peterbilt 387 Belts and Hoses Categories
Essential Belts and Hoses for 2005 Peterbilt 387s
Gates – Gates Straight Silicone Coolant Hose (Sold by inch), 24840 (Part No.24840)
from
$5.29
Extra long-lasting hose constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Excellent for extreme ambient and radiant temperature conditions.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10"" Long, 2.50"" Diameter, C71813" (Part No.C71813)
from
$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Gates – Gates DriveAlign Belt Drive Idler/Tensioner Pulley, 36092 (Part No.36092)
from
$88.99
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
See More
Litens – Litens Idler Pulley: Direct Fit, Steel, 86.5mm Diameter, with Hardware, 900379A (Part No.900379A)
from
$136.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Freightliner Argosy and FLD. Comes complete with new bolt, washer, and spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco – Poly Rib Belt, Premium, Dayco, 5060738 (Part No.5060738)
from
$47.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K120858HD (Part No.K120858HD)
from
$193.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Dayco – Dayco Straight Radiator Hoses EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by inch), 77300GL (Part No.77300GL)
from
$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40 Deg. F (-40 Deg. C) to +212 Deg. F (+100 Deg. C).
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Gates – Gates FleetRunner Heavy-Duty Serpentine Belt Drive Component Kit, 90K-38610HDC (Part No.90K-38610HDC)
from
$669.99
Gates FleetRunner Heavy-Duty Serpentine Belt Drive Component Kit, 90K-38610HDC.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 5060640 (Part No.5060640)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K080720 (Part No.K080720)
from
$84.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 43.6 Long, 6 Rib Count, 436K6 (Part No.436K6)
from
$33.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter, 900301A (Part No.900301A)
from
$82.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is 74.1mm O.D. Applications include HD Truck and Bus applications Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 32.8mm Width, Smooth, 89105 (Part No.89105)
from
$45.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Litens – Litens Tensioner Pulley: Direct Fit, Steel, 74mm Diameter, 900116A (Part No.900116A)
from
$44.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 37.5mm Width, 8 Grooves, 89112 (Part No.89112)
from
$81.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 57mm Width, Smooth, 89110 (Part No.89110)
from
$79.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 38.3mm Width, Smooth, 89111 (Part No.89111)
from
$86.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 42.6mm Width, Smooth, 89109 (Part No.89109)
from
$65.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco – Dayco Straight Radiator Hoses EPDM Rubber, 2 1/2 Inch Inner Diameter (Sold by inch), 76250 (Part No.76250)
from
$1.79
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 2.50"" Diameter, E70922" (Part No.E70922)
from
$26.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Belt Tensioner 1 Piece, HD, Engineered To Handle Higher Torque, 89448 (Part No.89448)
from
$183.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910559A (Part No.910559A)
from
$254.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Belt Tensioner 1 Piece, HD, Engineered To Handle Higher Torque, 89418 (Part No.89418)
from
$195.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910577A (Part No.910577A)
from
$174.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Gates – Gates FleetRunner Heavy-Duty Automatic Belt Drive Tensioner, 38521 (Part No.38521)
from
$408.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.
See More
Gates – Gates FleetRunner Heavy-Duty Automatic Belt Drive Tensioner, 38511 (Part No.38511)
from
$227.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.
See More
Upgrade your 2005 Peterbilt 387 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2005 Peterbilt 387, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Peterbilt or enhancing its overall performance, Belts and Hoses are key to keeping your 387 functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Belts and Hoses for the 2005 Peterbilt 387, designed to meet your needs without breaking the bank.
From
Radiator Hose
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2005 Peterbilt 387 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.29 to $669.99, with
an average price of $118.17.
Our 42 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 2005 Peterbilt 387 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Peterbilt 387, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco Driveworks, and more.
Dayco Belts and Hoses
start at just $33.99 and boast an impressive 4.5 stars average rating from customers.
With 32 customer reviews and counting, our 2005 Peterbilt 387 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 2005 Peterbilt 387 is always ready to roll. We’re committed to providing you with everything you need to keep your 387 in top shape, all in one place.
Start shopping confidently below for your 2005 Peterbilt 387!
Best-Selling Radiator Hoses for 2005 Peterbilt 387s
Enhance the driving experience in your Peterbilt with 3 quality Radiator Hose components, starting at $1.29.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19"" Long, 2.50"" Diameter, E70922" (Part No.E70922)
from
$26.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Straight Radiator Hoses EPDM Rubber, 2 1/2 Inch Inner Diameter (Sold by inch), 76250 (Part No.76250)
from
$1.79
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Most Popular 2005 Peterbilt 387 Serpentine and V Belts
Customize your Peterbilt with 19 Serpentine and V Belts products
like Serpentine Belts,
V-Belts, and
Drive Belt Idler Assemblies, all
priced under $669.99.
Dayco – Dayco Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 5060640 (Part No.5060640)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 640K6 (Part No.640K6)
from
$22.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 86.5mm Dia., 39.4mm Width, Smooth, 89106 (Part No.89106)
from
$57.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 37.5mm Width, 8 Grooves, 89112 (Part No.89112)
from
$81.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K080952HD (Part No.K080952HD)
from
$141.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K060637HD (Part No.K060637HD)
from
$52.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 38.3mm Width, Smooth, 89111 (Part No.89111)
from
$86.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco – Dayco Poly Rib Belt HD Serpentine Belt 87.25 Long, 12 Rib Count, Heavy Duty, 5120873 (Part No.5120873)
from
$84.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K060568HD (Part No.K060568HD)
from
$64.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates FleetRunner Heavy-Duty Serpentine Belt Drive Component Kit, 90K-38610HDC (Part No.90K-38610HDC)
from
$669.99
Gates FleetRunner Heavy-Duty Serpentine Belt Drive Component Kit, 90K-38610HDC.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K120872HD (Part No.K120872HD)
from
$154.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt, K080968HD (Part No.K080968HD)
from
$153.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K120872 (Part No.K120872)
from
$105.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K080968 (Part No.K080968)
from
$95.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco – Dayco Poly Rib Belt HD Serpentine Belt 97 Long, 8 Rib Count, Heavy Duty, 5080970 (Part No.5080970)
from
$91.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K080952 (Part No.K080952)
from
$88.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 57mm Width, Smooth, 89110 (Part No.89110)
from
$79.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 42.6mm Width, Smooth, 89109 (Part No.89109)
from
$65.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.
See More
Carquest Standard – "Carquest Serpentine Belt: 64.0"" Long, 6 Rib Count, 640K6" (Part No.640K6)
from
$22.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Top Picks for 2005 Peterbilt 387 Engine Cooling Hoses
Upgrade Peterbilt 387s with top-quality Engine Cooling Hoses parts, including 2 OEM and aftermarket selections for your 2005 model.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10"" Long, 2.50"" Diameter, C71813" (Part No.C71813)
from
$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 1 Inch Diameter (Sold by foot), 80319 (Part No.80319)
from
$5.99
Dayco Insulone Heater Hose is designed for use in cold climate applications where efficient heat transfer is important for comfortable and cost-effective operation of the vehicle. Note: This hose is NOT suitable for fuel or oil transfer.
See More
In-Demand Belt Tensioners for 2005 Peterbilt 387s
Select from 9 premium Belt Tensioners parts for your 2005 Peterbilt 387, with prices ranging from $172.99 to $276.99.
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Belt Tensioner 1 Piece, HD, Engineered To Handle Higher Torque, 89440 (Part No.89440)
from
$179.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.
See More
Dayco No Slack Gold Label – Dayco No Slack Gold Label Serpentine Belt Tensioner 1 Piece, HD, Engineered To Handle Higher Torque, 89448 (Part No.89448)
from
$183.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910074A (Part No.910074A)
from
$172.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910568A (Part No.910568A)
from
$229.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910003A (Part No.910003A)
from
$222.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered Litens, the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Fits a large variety of Makes, Models, and Engines. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Gates – Gates FleetRunner Heavy-Duty Automatic Belt Drive Tensioner, 38587 (Part No.38587)
from
$276.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910033A (Part No.910033A)
from
$251.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – Gates FleetRunner Heavy-Duty Automatic Belt Drive Tensioner, 38511 (Part No.38511)
from
$227.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 910062A (Part No.910062A)
from
$197.99
“This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “”lift-lug”” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.”
See More
Most Sold 2005 Peterbilt 387 Heater Hoses
Explore our best-selling Peterbilt parts for the 2005 387 among 1 OEM and aftermarket options starting from $2.99.
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Top-Rated Belts and Hoses Brands For Your 2005 Peterbilt 387
Shop for the best-rated brands offering Belts and Hoses and other products for your 2005 Peterbilt 387s. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2005 387 start at just $22.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 2005 Peterbilt 387 Belts and Hoses
When it comes to maintaining or upgrading your 2005 Peterbilt 387, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2005 Peterbilt 387. With over 1 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $33.99. Plus, with over 16 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$33.99
(16)
Dayco Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 5060640
“Good brand of belt”
Popular Driveworks 2005 Peterbilt 387 Belts and Hoses
Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2005 Peterbilt 387 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2005 387, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Peterbilt in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $22.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$22.99
(4)
Driveworks Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 640K6
“The parts were ready for me when I arrived to pick them and they fit fine.”
FAQs for 2005 Peterbilt 387 Belts and Hoses
Which Belts and Hoses are best-sellers for 2005 Peterbilt 387s?
Out of 42 Belts and Hoses that fit 2005 Peterbilt 387s, the following parts are the top sellers:
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Driveworks Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 640K6 (5061717) – $22.99
- Dayco No Slack Gold Label Serpentine Idler/Tensioner Pulley Steel, 74mm Dia., 39.25mm Width, Smooth, 89101 (20130043) – $44.99
What’s the price range for 2005 Peterbilt 387 Belts and Hoses?
Belts and Hose prices for the 2005 Peterbilt 387 start at $1.29 and go up to $669.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2005 Peterbilt 387?
The average price for Belts and Hoses for the 2005 Peterbilt 387 is $118.17. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Peterbilt 387 model years?
What are the cheapest Belts and Hoses for my 2005 Peterbilt 387?
The cheapest 2005 Peterbilt 387 Belts and Hoses we carry in stock are:
- Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (10844595) – $1.29
- Dayco Straight Radiator Hoses EPDM Rubber, 2 1/2 Inch Inner Diameter (Sold by inch), 76250 (10628460) – $1.79
- Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (10844721) – $2.99
- Dayco Straight Heater Hose EPDM Rubber, 1 Inch Diameter (Sold by foot), 80319 (10844562) – $5.99
- Driveworks Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 640K6 (5061717) – $22.99
What are the top-rated Belts and Hoses that fit the 2005 Peterbilt 387?
Out of 32 reviews by customers, our 2005 Peterbilt 387 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2005 Peterbilt 387 and their top-rated products:
- Serpentine and V Belts
- Dayco Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 5060640 (3290125) – $33.99
- Driveworks Poly Rib Belt Serpentine Belt 64 Long, 6 Rib Count, 640K6 (5061717) – $22.99
What types of Belts and Hoses do you sell for my 2005 Peterbilt 387?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2005 Peterbilt 387:
Can I get help with 2005 Peterbilt 387 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Peterbilt Belts and Hoses and more.
What is your return policy for Peterbilt 387 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Peterbilt 387 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
