2005 Nissan Titan Drivetrains

Essential Drivetrains for 2005 Nissan Titans

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

from

$32.99
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

NTN – Wheel Bearing (Part No.K8000317877NTN)

Wheel Bearing

from

$173.35
Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials & design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:
  • For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
  • For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads & longer life.
See More

Neapco – Universal Joint (Part No.1-0153)

Universal Joint

from

$4.49
Universal Joint
See More

Dorman – Differential Housing Cover (Part No.697-817)

Differential Housing Cover

from

$142.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Pro-King – Crush Sleeve (Part No.714B034)

Crush Sleeve

from

$12.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Pinion Gear Thrust Washer For Nissan Titan N205 Front (Part No.33531)

Pinion Gear Thrust Washer For Nissan Titan N205 Front

from

$23.99
Product Features:
  • Pinion gear thrust washer
  • Fits Nissan Titan front
See More

USA Standard Gear – Spartan Locker for Nissan M226 Rear with 32 Spline (Part No.17009)

Spartan Locker for Nissan M226 Rear with 32 Spline

from

$729.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit uses a heavy-duty cross pin.

Product Features:
  • Fits Nissan M226 rear
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Dorman – Spindle Nut M24-1.50 Hex 32mm (Sold by each) (Part No.615-223)

Spindle Nut M24-1.50 Hex 32mm (Sold by each)

from

$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-6007)

Drive Shaft: Greasable, Direct Replacement

from

$668.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

SKF – Input Shaft Seal (Part No.J1156255683SKF)

Input Shaft Seal

from

$23.82
Input Shaft Seal

Dorman – OE Solutions Axle Shaft Kit (Part No.K4005700772DOR)

OE Solutions Axle Shaft Kit

from

$489.74
Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.

Product Features:
  • Comes assembled with U-Joints installed
  • Direct replacement for a proper fit every time
  • Durable steel construction for long-lasting performance
  • Vehicle try-on testing has been conducted on this part to ensure trouble-free performance
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

EMPI – Axle Shaft Nut (Part No.K4030847146EMP)

Axle Shaft Nut

from

$6.31
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Yukon Gear – Master Overhaul Kit For Nissan Titan Front Differential (Part No.14171)

Master Overhaul Kit For Nissan Titan Front Differential

from

$609.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Nissan Titan front
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.54 Ratio (Part No.24585)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 3.54 Ratio

from

$589.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.5″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.54 ratio
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2882)

Cu Boot Kit

from

$41.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

USA Standard Gear – Master Overhaul Kit for Nissan M226 Rear Differential (Part No.37104)

Master Overhaul Kit for Nissan M226 Rear Differential

from

$419.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Nissan M226 rear
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush, silicone and gasket.
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Side Seal For Nissan Titan Front Differential (Part No.30302)

Side Seal For Nissan Titan Front Differential

from

$182.99
Side seal for Nissan Titan front differential.

Product Features:
  • Side seal
  • Fits Nissan Titan front
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)

Drive Shaft Center Support

from

$48.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

Yukon Gear – Cross Pin Shaft For Nissan Titan N205 Front (Part No.33537)

Cross Pin Shaft For Nissan Titan N205 Front

from

$42.99
Product Features:
  • Cross pin shaft
  • Fits Nissan Titan front
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Upgrade your 2005 Nissan Titan with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2005 Nissan Titan, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Drivetrains are key to keeping your Titan functioning at its best. At Advance Auto Parts, we offer a wide selection of 152 Drivetrains for the 2005 Nissan Titan, designed to meet your needs without breaking the bank. From Universal Joint replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2005 Nissan Titan at great prices. Our Drivetrains inventory for this model ranges from just $2.02 to $1,566.99, with an average price of $159.39. Our 152 Drivetrains in stock come from 28 trusted brands, so you’re sure to find the right part for your 2005 Nissan Titan without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Nissan Titan, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Royal Purple, Moog, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Royal Purple and Moog also bring quality to the table, with Drivetrains available starting at $12.99, and at an average 5 stars rating. With 6,966 customer reviews and counting, our 2005 Nissan Titan Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Nissan Titan is always ready to roll. We’re committed to providing you with everything you need to keep your Titan in top shape, all in one place. Start shopping confidently below for your 2005 Nissan Titan!

Best-Selling Universal Joints for 2005 Nissan Titans

Enhance the driving experience in your Nissan with 22 quality Universal Joint components, starting at $4.49.

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

Greaseable Premium Universal Joint

from

$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Universal Joint (Part No.DW-369)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Driveworks – Universal Joint (Part No.DW-331)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

Non-Greaseable Super Strength Universal Joint

from

$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Greaseable Premium Universal Joint

from

$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Brute Force – Universal Joint (Part No.2-0053BF)

Universal Joint

from

$8.39
Universal Joint – Brute Force
See More

Neapco – Universal Joint (Part No.1-0154)

Universal Joint

from

$6.49
Universal Joint
See More

Neapco – Universal Joint (Part No.2-0053)

Universal Joint

from

$5.39
Universal Joint
See More

Neapco – Universal Joint (Part No.1-0153)

Universal Joint

from

$4.49
Universal Joint
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331C)

Greaseable Premium Universal Joint

from

$42.99
Backed by superior materials and rigorous testing, MOOG Anti-Galvanic universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installations.

Product Features:
  • INHIBITS GALVANIC REACTION — Designed specifically for aluminum yokes to avoid a galvanic reaction that leads to corrosion
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • CORROSION PROTECTION — Bearing cups and snap rings are chemically-coated to protect aluminum yokes
  • KEEPS DIRT OUT — Nitrile rubber grease seals with double lip design protects components from wear-causing contaminants
  • GREASABLE DESIGN — Radial design of bearing cups allows 360 Degrees lubricant distribution to all bearing surfaces to flush out contaminants and moisture to reduce corrosion and wear
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

GMB – Universal Joint – Greasable (Part No.K1010481404GMB)

Universal Joint - Greasable

from

$32.60
Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.

Product Features:
  • Elliptical bearing design delivers reliable performance under the heaviest of loads
  • Exclusive GMB Ultra-select bearing design exceeds OE specification
  • Precision finish trunnions and bearing surfaces ensure durability
  • Proven reliability in off-road conditions and harsh environments
See More

Yukon Gear – Replacement Pinion Flange For Dana 44, ’04-’07 Nissan Titan Rear (Part No.41188)

Replacement Pinion Flange For Dana 44, '04-'07 Nissan Titan Rear

from

$334.99
Product Features:
  • Fits 2004-2007 Nissan Titan rear
  • 29 spline
  • Round companion flange
See More

Yukon Gear – Replacement Pinion Flange For Dana 44, ’08 & Up Nissan Titan Rear (Part No.41187)

Replacement Pinion Flange For Dana 44, '08 & Up Nissan Titan Rear

from

$178.99
Product Features:
  • Fits Nissan Titan rear
  • 24 spline
  • Round companion flange
See More

Spicer – Universal Joint (Part No.5-1350-1X)

Universal Joint

from

$49.99
Universal Joint

Spicer – Lube For Life Non Greasable U-Joint (Part No.K1010991372SPI)

Lube For Life Non Greasable U-Joint

from

$43.92
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they’re pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, as well as greasable and non-greasable styles. Order the model designed for fitment with your vehicle and engine type.

Product Features:
  • Forged cross
  • Lubeable
  • O.E.M replacement
  • Snap rings
See More

Autopart International Inc – U Joint (Part No.K10101976375API)

U Joint

from

$24.18
U Joint

Autopart International Inc – U Joint (Part No.K10101997900API)

U Joint

from

$20.07
U Joint

Neapco – Universal Joint (Part No.2-0052)

Universal Joint

from

$15.59
Universal Joint
See More

Most Popular 2005 Nissan Titan Transfer Cases

Customize your Nissan with 11 Transfer Cases products like Input Shaft Bearings, Transfer Case Output Shaft Seals, and Input Shaft Seals, all priced under $92.99.

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.710665)

Multi Purpose Seal

from

$15.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

SKF – Input Shaft Seal (Part No.J1156255683SKF)

Input Shaft Seal

from

$23.82
Input Shaft Seal

National – Bearings (Part No.110-CC)

Bearings

from

$92.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – BEARING (Part No.6208-C3)

BEARING

from

$24.79
BEARING

National – Multi Purpose Seal (Part No.710917)

Multi Purpose Seal

from

$22.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

NOK – Trans Case Output Sh (Part No.J7121161595NOK)

Trans Case Output Sh

from

$13.65
Trans Case Output Sh

National – Multi Purpose Seal (Part No.710696)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

FAG US – CUP (Part No.M88010)

CUP

from

$11.29
CUP

Top Picks for 2005 Nissan Titan 4WD Components

Upgrade Nissan Titans with top-quality 4WD Components parts, including 1 OEM and aftermarket selections for your 2005 model.

Carquest Premium – 4WD Switch (Part No.FWC1048)

4WD Switch

from

$131.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

In-Demand Drive Shafts and Axles for 2005 Nissan Titans

Select from 34 premium Drive Shafts and Axles parts for your 2005 Nissan Titan, with prices ranging from $6.31 to $1,302.41.

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV53595)

CV Axle Shaft Assembly

from

$141.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Rear Drive Shaft (Part No.946-291)

Rear Drive Shaft

from

$649.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

National – Bearings (Part No.B-228)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Extreme Duty CV Axle (Part No.NCV53595XD)

Extreme Duty CV Axle

from

$142.99
Manufactured to be an OE replacement with the addition of eXtreme Duty outer boots designed to withstand extreme low temperatures and resist impact tears. CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:
  • Thermoplastic Outboard Boots
  • All New Materials
  • Boots Performance Tested to -50F
  • Moly-Blend Grease in inner and outer joints
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)

Drive Shaft Center Support

from

$48.99
Product Features:
  • Brand may vary by location
See More

NTN – Axle Shaft Bearing (Part No.K4010161677NTN)

Axle Shaft Bearing

from

$90.72
Axle Shaft Bearing

Spicer – Universal Joint (Part No.5-3615X)

Universal Joint

from

$51.99
Universal Joint

Yukon Gear – Outer Axle Seal To Be Used With Set10 Bearing (Part No.30218)

Outer Axle Seal To Be Used With Set10 Bearing

from

$19.99
Outer axle seal to be used with set10 bearing.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • For use with Set10 bearing
See More

Original Equipment – Driveshaft Support (Part No.K1030161681OEA)

Driveshaft Support

from

$123.37
The Original Equipment Driveshaft Support is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

National – Multi Purpose Seal (Part No.710919)

Multi Purpose Seal

from

$58.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – OE Solutions Drive Shaft Assembly (Part No.K1000315760DOR)

OE Solutions Drive Shaft Assembly

from

$1302.41
A highly cost-effective, innovative repair solution, Dorman’s Driveshaft Assembly is engineered with a serviceable universal joint. When the u-joint fails, as is common with normal use, simply replace the u-joint – rather than replacing the entire assembly.

Product Features:
  • Dorman-engineered from 100% new materials and rigorously tested for long-lasting durability
  • Coated for extended resistance to rust and corrosion
  • Dorman Drop Ship Drive Shafts are made, balanced and tested in the USA
  • Direct replacement for a proper fit
See More

Dorman – Rear Drive Shaft (Part No.936-212)

Rear Drive Shaft

from

$1085.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Adjustable, OE Fix (Part No.938-209)

Front Drive Shaft: Adjustable, OE Fix

from

$448.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation.
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance.
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-6002)

Drive Shaft: Greasable, Direct Replacement

from

$333.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Yukon Gear – Side Seal For Nissan Titan Front Differential (Part No.30302)

Side Seal For Nissan Titan Front Differential

from

$182.99
Side seal for Nissan Titan front differential.

Product Features:
  • Side seal
  • Fits Nissan Titan front
See More

FAG US – HANGER BEARING (Part No.CH0156)

HANGER BEARING

from

$148.99
HANGER BEARING

Spicer – Center Support Bearing (Part No.212031-1X)

Center Support Bearing

from

$144.99
Center Support Bearing

Worldpac – DRIVESHAFT SUPPORT (Part No.K1030285450SKF)

DRIVESHAFT SUPPORT

from

$123.37
DRIVESHAFT SUPPORT

Spicer – Center Support Bearing (Part No.212258-1X)

Center Support Bearing

from

$118.99
Center Support Bearing

FAG US – WHEEL BEARING (Part No.KT10)

WHEEL BEARING

from

$70.99
WHEEL BEARING

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Autopart International Inc – Wheel Seal (Part No.K80101940009API)

Wheel Seal

from

$36.64
Wheel Seal

Yukon Gear – Axle Shaft Seal (Part No.30361)

Axle Shaft Seal

from

$26.99
Axle Shaft Seal

Dorman – Spindle Nut (Part No.K1002754968DOR)

Spindle Nut

from

$15.78
Spindle Nut

EMPI – Axle Shaft Nut (Part No.K4030847146EMP)

Axle Shaft Nut

from

$6.31
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Most Sold 2005 Nissan Titan Differentials

Explore our best-selling Nissan parts for the 2005 Titan among 76 OEM and aftermarket options starting from $2.02.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

from

$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:
  • Better Wear Protection
  • Increased Protection against Low Speed Pre-Ignition
  • Increased Fuel Efficiency
  • Better Protection for Vehicle Exhaust Emissions Equipment
  • Improved Compatibility with Fuels Containing Ethanol
  • Superior Corrosion Protection
  • Made in USA
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

from

$32.99
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

from

$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • For use with open, limited-slip and locking differential
  • Contains limited-slip friction modifier
  • Made in USA
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

from

$69.99
Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Dorman – Rear Axle Shaft Kit (Part No.630-339)

Rear Axle Shaft Kit

from

$378.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.100712V)

Multi Purpose Seal

from

$30.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: springless; single-lip
  • Temperature range: -100°F to 450°F; -73°C to 232°C
  • Resistant to hydrocarbon/oxygenate blends and provides superior performance
  • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.208)

Bearings

from

$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

from

$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.JLM704610)

Bearings

from

$16.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

National – Bearings (Part No.HM803110)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Dana 44 JK Rubicon Replacement Rear Pinion Seal (Part No.30125)

Dana 44 JK Rubicon Replacement Rear Pinion Seal

from

$32.99
Dana 44 JK Rubicon replacement rear pinion seal.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Jeep JK rear
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Tapered Roller Bearing

from

$6.29
Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Nissan Titan Spartan Locker Cross Pin Shaft (Part No.17027)

Nissan Titan Spartan Locker Cross Pin Shaft

from

$59.99
Nissan Titan Spartan locker cross pin shaft.

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Nissan Titan rear
  • Works with Spartan Locker or standard open spider gears
See More

National – Multi Purpose Seal (Part No.711069)

Multi Purpose Seal

from

$23.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear - Approx 0.620" Long

from

$5.99
Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

Product Features:
  • Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
  • 0.620″ tall
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.13 Ratio (Part No.24584)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 3.13 Ratio

from

$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.5″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.13 ratio
See More

Yukon Gear – Master Overhaul Kit For Nissan Titan Rear Differential (Part No.14172)

Master Overhaul Kit For Nissan Titan Rear Differential

from

$459.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Nissan Titan rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – Nissan Titan Pinion Seal, Front Differential (Part No.30301)

Nissan Titan Pinion Seal, Front Differential

from

$144.99
Nissan Titan pinion seal, front differential.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Nissan Patrol front
See More

Yukon Gear – Nissan Titan Crush Sleeve (Part No.33129)

Nissan Titan Crush Sleeve

from

$46.99
Nissan Titan crush sleeve, front differential. Approx 1.400″ long.

Product Features:
  • Crush sleeve
  • Fits Nissan Titan rear
  • 1.400″ tall
See More

National – Multi Purpose Seal (Part No.710920)

Multi Purpose Seal

from

$42.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

Tapered Roller Bearing

from

$13.49
Product Features:
  • Brand may vary by location
See More

USA Standard Gear – Spartan Locker for Nissan M226 Rear with 32 Spline (Part No.17009)

Spartan Locker for Nissan M226 Rear with 32 Spline

from

$729.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit uses a heavy-duty cross pin.

Product Features:
  • Fits Nissan M226 rear
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)

Grizzly Locker For Nissan Titan Rear With 32 Splines

from

$1119.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits Nissan Titan rear
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.36 Ratio (Part No.24583)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 3.36 Ratio

from

$709.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.50″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.36 ratio
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Powertrax – Grip LOK Traction System (Part No.LK444430)

Grip LOK Traction System

from

$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 2.94 Ratio (Part No.24582)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 2.94 Ratio

from

$615.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.5″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 2.94 ratio
See More

Yukon Gear – Master Overhaul Kit For Nissan Titan Front Differential (Part No.14171)

Master Overhaul Kit For Nissan Titan Front Differential

from

$609.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Nissan Titan front
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.54 Ratio (Part No.24585)

Ring & Pinion Set For '08 & Up Nissan Titan Rear, 3.54 Ratio

from

$589.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan rear
  • 8.5″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.54 ratio
See More

Yukon Gear – Ring & Pinion Set For ’04 & Up Nissan Titan Front, 3.36 Ratio (Part No.24578)

Ring & Pinion Set For '04 & Up Nissan Titan Front, 3.36 Ratio

from

$574.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan front
  • 8.0″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 3.36 ratio
See More

Yukon Gear – Ring & Pinion Set For ’04 & Up Nissan Titan Front, 2.94 Ratio (Part No.24579)

Ring & Pinion Set For '04 & Up Nissan Titan Front, 2.94 Ratio

from

$567.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Nissan Titan front
  • 8.0″ ring gear diameter
  • 24 spline pinion
  • 10 ring gear bolts
  • 2.94 ratio
See More

Yukon Gear – RngPnnKt (Part No.24706)

RngPnnKt

from

$499.99
RngPnnKt

Top-Rated Drivetrains Brands For Your 2005 Nissan Titan

Shop for the best-rated brands offering Drivetrains and other products for your 2005 Nissan Titans. Below you’ll find some of our best rated Drivetrains from Valvoline, Royal Purple, and Moog, and more. Drivetrains from these brands that fit a 2005 Titan start at just $12.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2005 Nissan Titan Drivetrains

When it comes to maintaining or upgrading your 2005 Nissan Titan, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2005 Nissan Titan. With over 7 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $28.70. Plus, with over 654 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Royal Purple 2005 Nissan Titan Drivetrains

Royal Purple auto parts is one of the highest quality Drivetrain brands in the market. Any 2005 Nissan Titan owner should feel confident when installing genuine Royal Purple parts in their vehicle. To ensure the best fit and performance for your 2005 Titan, Advance Auto Parts carries a full inventory of 3 Royal Purple Drivetrains. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Royal Purple Drivetrains range from $12.99 to $25.99, plus, with more than 139 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
from
$12.99
This product is not rated

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

“”

FAQs for 2005 Nissan Titan Drivetrains

Which Drivetrains are best-sellers for 2005 Nissan Titans?

Out of 152 Drivetrains that fit 2005 Nissan Titans, the following parts are the top sellers:

What’s the price range for 2005 Nissan Titan Drivetrains?

Drivetrain prices for the 2005 Nissan Titan start at $2.02 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2005 Nissan Titan?

The average price for Drivetrains for the 2005 Nissan Titan is $159.39. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Nissan Titan model years?

Yes, we currently carry Drivetrains for 19 model years of Nissan Titans between 2004 and 2024. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2005 Nissan Titan?

The cheapest 2005 Nissan Titan Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2005 Nissan Titan?

Out of 6,966 reviews by customers, our 2005 Nissan Titan Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2005 Nissan Titan and their top-rated products:

What types of Drivetrains do you sell for my 2005 Nissan Titan?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2005 Nissan Titan:

Can I get help with 2005 Nissan Titan Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Drivetrains and more.

What is your return policy for Nissan Titan Drivetrains?

Advance Auto Parts keeps returns simple. For new Nissan Titan Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.