2005 Mercedes-Benz SLK55 AMG Brake Parts

Diaphram Position Se

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

Brake Pad Pin Set

The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:

• Short closing paths
• Low volume uptake
• High efficiency
• Low throttling / after-suction resistance
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS
• Compact design – ideal for installation in small spaces
• Reduced weight – by roughly 20% compared to conventional central valve technology
• Fewer components – almost half as many as compared to conventional technologies
• Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
• Low volume uptake – minimized elastic deformations due to smaller seals
• Sealing cups supported in the housing – robustness against soiling and wear; longer life
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents premature wear and maximizes performance
• Helps deliver a quieter, more efficient braking system
• Manufactured with quality materials to suppress high stress levels

Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:

• Contains all the necessary hardware for easy installation
• Direct replacement for a perfect fit, form and function
• Corrosion resistant for long-lasting durability against harsh roads
• Manufactured with quality materials to restrain high tolerances

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design.
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

Parking Brake Shoe S

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

Brake Dust Shield

Brake Dust Shield

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with Febi’s Disc Brake Caliper Bolt Kit.

Product Features:

• OE Quality
• Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
• Pre-coated with thread lock to prevent loosening

Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

• High durability
• Low volume expansion
• 100% high pressure tested and certified quality

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. Brembo UV Coating Technology : Brembo is the first to offer UV coating technology engineered for our leading OE customers with a unique metallic finish developed exclusively for the Aftermarket. The UV coated disc does not require cleaning and degreasing. These discs are ideal for vehicle with alloy wheels and for motorists for whom attention to detail is a prerequisite. High Carbon Discs: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brands foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs. PVT pillar venting technology: ( Vented Rotors Only ) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• Metallic finish that maintains a clean and bright appearance over the entire life span of the disc
• Protective coating on braking plate surfaces, external diameter and disc hub to ensure complete protection
• New location for minimum thickness control with greater ease of reading for service professionals
• Water-based paint free of chemical solvents – Energy efficient UV coating process
• Superior to products currently on the market proven by resistance to: Salt spray testing, Humidity and High temperatures BREMBO UV COATED DISCS BROCHURE

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.

Product Features:

• Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
• Ultra-Quiet – controls noise, vibration and harshness level
• European braking performance with enhanced pedal feel
• Extremely rotor friendly for longer rotor life
• Friction formulas specially designed for European vehicles

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion