2005 Mercedes-Benz G500 Cooling and Climate Controls

Essential 2005 Mercedes-Benz G500 Cooling and Climate Controls

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Behr – Behr Expansion Tank (Part No.G1030232662BEH)

Behr Expansion Tank

from

$76.02
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

Product Features:
  • OE-Equivalent and Direct Fit for easy Installation.
  • OE style connections and fittings.
  • Made of highly durable materials.
  • Resistant to thermal wear and cracking.
See More

Hella – Coolant Level Sensor (Part No.G1050101126HEL)

Coolant Level Sensor

from

$26.44
Coolant Level Sensor

Graf – Water Pump (Part No.G3000948549GRA)

Water Pump

from

$120.87
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39211)

A/C Block Type O-Ring Expansion Valve

from

$38.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1075)

Coolant Temperature Sensor with O-Ring

from

$25.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

ACM – A/C Schrader Valve C (Part No.R1138570550ACM)

A/C Schrader Valve C

from

$2.78
A/C Schrader Valve C

Carquest Standard – Reman Nippondenso 7SEU17C Compressor w/ Clutch (Part No.DW97366)

Reman Nippondenso 7SEU17C Compressor w/ Clutch

from

$187.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

APA/URO Parts – Water Pump Pulley (Part No.G302066529APA)

Water Pump Pulley

from

$73.47
Water Pump Pulley

Carquest Premium – Integrated Thermostat Housing: With Seal, 192 Degrees (Part No.14569)

Integrated Thermostat Housing: With Seal, 192 Degrees

from

$49.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heater Core (Part No.910629)

Heater Core

from

$61.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – A/C Condenser (Part No.713394)

A/C Condenser

from

$227.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75898)

Blower Motor: With Wheel

from

$152.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Bosch – Auxiliary Water Pump (Part No.G305028293BOS)

Auxiliary Water Pump

from

$151.14
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • CO²-reduction by optimized efficiency, speed control and reduced weight
  • Coverage of a wide hydraulic performance range
  • Reduced noise level
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)

Engine Coolant Reservoir Cap

from

$19.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1074)

AC Pressure Sensor

from

$135.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Radiator Drain Cock Screw-In Type With Washer

from

$6.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505066528FEB)

Bilstein Engine Cooling Fan Blade

from

$70.28
The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Radiator (Part No.412908)

Radiator

from

$698.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Rein – A/C Evaporator Assembly (Part No.ACK0069R)

A/C Evaporator Assembly

from

$299.99
Rein OE Quality Air Conditioning Evaporator Assembly. Fitted with expansion valves only from OES suppliers. Designed and tested in the same manner as OE evaporators. Delivered with the correct expansion valve, pre-mounted and pressure tested to ensure a proper installation. The perfect replacement for your original equipment.
See More

ACM – ACM A/C Receiver Drier (Part No.R1040148407ACM)

ACM A/C Receiver Drier

from

$173.86
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26768)

O-Ring & Gasket A/C System Seal Kit

from

$31.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1871)

Multi Purpose Relay

from

$27.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

2005 Mercedes-Benz G500 Cooling and Climate Controls

You count on your 2005 Mercedes-Benz G500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 58 Cooling and Climate Controls ranging in price from $2.78 to $963.88, you’re sure to find everything you need for your 2005 Mercedes-Benz G500.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 22 different brands like Permatex, Carquest Premium, and Factory Air. 2005 Mercedes-Benz G500 Cooling and Climate Controls start as low as $2.78!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 420 extensive product reviews on 2005 Mercedes-Benz G500 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are A/C New; w/ Clutch; w/ 7SEU16C Compressor with 5.0 stars and Engine Coolant Reservoir Cap with 5.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2005 Mercedes-Benz G500 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2005 Mercedes-Benz G500

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Mercedes-Benz G500 running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.

Popular DENSO Cooling and Climate Controls

You’ll find popular DENSO brand products across Air Conditioning Parts. All are waiting to get your 2005 Mercedes-Benz G500 back on the road. Some of the top-rated DENSO products in these categories are:
New Compressor With Clutch
from $479.99
(1)
New Compressor With Clutch
AC Compressor Without Clutch

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2005 Mercedes-Benz G500, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2005 Mercedes-Benz G500 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2005 Mercedes-Benz G500?

Out of 58 Cooling and Climate Controls for the 2005 Mercedes-Benz G500, the most popular in our inventory are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Engine Water Pump: New, Gasket/Seals Included
from $189.99
(17)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps
Integrated Thermostat Housing: With Seal, 192 Degrees
from $49.49
(5)
Integrated Thermostat Housing: With Seal, 192 Degrees
Thermostat and Water Outlet Assemblies

What are the top-rated 2005 Mercedes-Benz G500 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2005 Mercedes-Benz G500 based on customer reviews/ratings are:
A/C New; w/ Clutch; w/ 7SEU16C Compressor
from $571.99
(1)
A/C New; w/ Clutch; w/ 7SEU16C Compressor
“Works great no issues in the first 3 weeks since it was installed.”
Engine Coolant Reservoir Cap
from $19.79
(1)
Engine Coolant Reservoir Cap
“Works well, looks identical to OEM!”
Engine Water Pump: New, Gasket/Seals Included
from $247.99
(1)
Engine Water Pump: New, Gasket/Seals Included
“Perfect fit”