from

$3.02

Valve Keeper

from

$61.69

Oil Level Sender

from

$33.05

Timing Guide Rail

from

$6.97

Valve Stem Seal Kit

from

$235.99

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

Designed as a premium OE replacement
Dynamically balanced for smooth operation
Strong Iron casting for maximum strength
OEM equivalent bonded rubber

from

$262.18

Timing Chain

from

$59.99

The Crankshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. NTK Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

from

$1.79

Cam Plug

from

$8.29

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$10.49

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$61.69

Engineered from premium-quality materials specific to the application. The head gasket, is built to meet or exceed all original equipment specifications and is validated for fit, form, and function

Product Features:

Application specific design to ensure a perfect fit and correct operation
High-performance FPM guarantees optimum leak tightness
High-quality design and engineering for perfect performance
Premium materials and high-precision curing processes

from

$212.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$14.49

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$23.39

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$43.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$438.54

Febi’s partner for engine timing is the renowned chain specialist IWIS. The German company is market leader in the timing chain sector and renowned for the top quality of its products. IWIS supplies timing chains for all Febi kits. Febi manufactures the remaining components for the timing chain kits to OE quality at its headquarters in Ennepetal. High quality parts are particularly important in engine timing to avoid costly engine damage. febi bilstein gives a 5-year or 100,000 km quality guarantee with its timing chain kits (subject to use of the correct engine oil recommended by the manufacturer). Febi timing chain kits contain all wear parts required for a high quality repair of the chain drive. To ensure a long engine life, all components of the timing chain kit should be replaced.

Product Features:

Contains everything you need to replace an engine timing chain in your vehicle
Offering the quality, reliability, and durability of OE
Manufactured to OE specification for fit, form, and function

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.55

Camshaft Adjuster Ma

from

$78.29

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$69.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MERCEDES 94-13;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2013
Weight approx: 3 Lbs
HYDRAULIC

from

$58.78

Camshaft Adjuster Ma

from

$35.49

This replacement camshaft adjuster magnet is a direct replacement for a damaged original equipment magnet. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

Ideal replacement – this VVT adjuster magnet matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system
Durable construction – this VVT adjuster magnet is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$4.09

Oil Filler Cap Gaske

from

$47.02

Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:

Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
Bosch continually improves its MAP sensor designs with the latest chip technology.
Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)

from

$54.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$67.19

The FAE MAP sensor, absolute pressure of admission, detects the air pressure at the inlet of the vehicle and turns it into an electrical signal which is sent to the engine’s electronic control unit (ECU) in order to regulate the stoichiometric mixture. Some models do have a NTC type temperature sensor that allows the MAP to detect, not only the pressure, but also the air temperature at the inlet. This information is necessary for the ECU to calculate the mass of intake air in order to be able to adjust the air-fuel mixture. The sensor element of the MAP is a piezoresistive type configured as a Wheatstone bridge, – its electrical resistance varies according to the mechanical de- formation of a membrane.

Product Features:

The sensor element is integrated in a MEMS-type DIE which amplifies, performs a thermal compensation and conditions the signal
The incorporated digital electronics allow us to program the output signal
The DIE is mounted on a ceramic circuit and its electrical connections are made by bonding
Protected with a receptacle and a silicone gel
The electronic circuit is achieved through hybrid technology and is handled in a clean room due to its sensitive nature.