from

$55.79

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$53.99

NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$6.29

IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:

Unique friction technology provides efficient and noise-free operation
Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life

from

$35.31

The Denso Direct Ignition Coil Boot is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Coil-On Plug Boot
Durable Material is Designed to Control Spark Intensity Timing
Ensures longevity, Durability and Reliability
Corrosion and Abrasive Resistant Material

from

$67.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$102.58

The Original Equipment Knock Sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OEM quality direct fit application
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Mounting hole is the same size as OE
Maintains OE specifications for frequency response

from

$84.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$72.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$64.99

NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$4.79

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$14.49

Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:

Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
Platinum ground electrode for extended life
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Sustained spark performance over 100,000 miles
Lasts up to three times as long as conventional plugs
Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
Iridium Long Life

from

$4.99

The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.

Product Features:

Opens spark face for better ignitability of flame kernel
Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
Dyno testing has shown proven power gains
Cut-back ground electrode evolved from practice of grinding back the side electrode

from

$5.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$54.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$296.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$1139.85

ORIGINAL EQUIPMENT QUALITY and HERITAGE NGK ignition coils, like our spark plugs, are manufactured to OE standards for the highest durability and operational performance, so they can be installed with OE confidence. Our coil designs are developed and proven tough in our ISO 17025 accredited test lab at extreme conditions that are far beyond any operational environment that a vehicle would experience.

Product Features:

OE-Equivalent and a direct fit application
Meets or exceeds the OE specifications for durability and performance
High profile insulation to prevent arching
Radio-Frequency Interference (RFI) Suppression
Engineered to withstand extremes in temperatures

from

$278.99

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$146.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$1.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.68

The Ishino Stone Distributor O-Ring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features: