2005 Lexus LX470 Exhaust Parts

MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 458005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49422. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1998-2007 Toyota Land Cruiser and 1998-2007 Lexus LX470, this direct-fit catalytic converter also interchanges with OE parts 17104-50121 and 17105-50121, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93142. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1998-2007 Toyota Land Cruiser and 1998-2007 Lexus LX470, this direct-fit catalytic converter also interchanges with OE parts 17104-50121 and 17105-50121, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:

• EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
• RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
• FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
• STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
• GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system

Exhaust Manifold Gasket

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold
• Contains all gaskets and seals to remove and replace exhaust manifold

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Contains all gaskets and seals to remove and replace exhaust manifold
• Contains all gaskets and seals to remove and replace exhaust manifold

This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:

• Based on the original OEM design for a guaranteed perfect fit
• No welds inside the silencer
• Easy installation
• Aluminized steel construction for maximum durability
• Constructed to reduce flex and withstand vehicle vibration
• External drain hole extends muffler life by allowing moisture to escape
• Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior

Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:

• CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
• EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
• BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
• PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
• DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Designed for a leak free connection
• OE structure and design
• Built to OEM specifications
• Secure gas-tight connection

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Exhaust Hanger

BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:

• Direct-fit configuration
• Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
• Optimal noise reduction
• Low backpressure and corrosion protection
• Constructed using 16-gauge aluminized steel
• Aluminized steel construction for maximum durability
• Constructed to help reduce flex and withstand vehicle vibration

BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.

Product Features:

• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Precise fitment
• Hassle-free installation and functionality verified by comprehensive testing procedures
• Easy installation
• Direct-fit exhaust system component that saves installation time

Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

• CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
• PREMIUM MATERIALS – Made from quality material for durability and long life
• BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:

• whilst developing the exhaust system
• BRExhaust also develops the installation hardware to the same standards.
• Manufactured from quality materials to ensure maximum durability
• Proper fit and functionality to finish your install
• Perfect, gas-tight performance
• Exhaust accessory that facilitates a complete installation process.
• Built to OEM specifications