2005 Jeep Liberty Alternators and Starters

Essential Alternators and Starters for 2005 Jeep Liberties

Bosch – Professional Preferred Alternator, Remanufactured (Part No.F4000162200BOS)

Professional Preferred Alternator, Remanufactured

from

$236.38
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:
  • Built to last using the highest quality materials and the most technologically advanced manufacturing processes
  • Remanufactured using more new parts than any other unit
  • 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
  • Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
  • Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
  • Rectifier 100 % tested (new on Ford)
  • Diodes 100% tested (replaced with new as required)
  • Rotor 100% performance-tested for maximum electrical output
  • 100% new long life sealed bearings with special high load, high temperature grease
  • Stator 100% insulation and phase balance tested
  • Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
  • 100% new long life self-lubricating brushes
  • 100% new clutch pulleys
  • All terminals, insulators and hardware provided
See More

Carquest Premium – Alternator: Remanufactured, 136 Amps (Part No.11242A)

Alternator: Remanufactured, 136 Amps

from

$189.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 160 Amps (Part No.13913A)

Alternator: Remanufactured, 160 Amps

from

$171.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Bosch – Alternator (Part No.F40001332172BOS)

Alternator

from

$352.51
Alternator

Carquest Premium – Alternator: Remanufactured, 140 Amps (Part No.11504A)

Alternator: Remanufactured, 140 Amps

from

$312.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Autopart International Inc – Starter (Part No.F50002268700API)

Starter

from

$188.54
Starter

Bosch – Premium 100% Remanufactured Starter (Part No.SR6476X)

Premium 100% Remanufactured Starter

from

$198.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:
  • Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
  • Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
  • Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
  • Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
See More

WAI – 2.2kW/12 Volt, CW, 10-Tooth Pinion (Part No.17940N)

2.2kW/12 Volt, CW, 10-Tooth Pinion

from

$272.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

OE+ – Starter (Part No.F50002246324IAP)

Starter

from

$150.52
Starter

Carquest Premium – Starter Remanufactured Premium (Part No.17882S)

Starter Remanufactured Premium

from

$153.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • 100% remanufactured drive clutch assembly ensures lasting performance
  • Armatures and commutators are 100% load tested
  • New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Ignition Lock Cylinder CSA1417 (Part No.CSA1417)

Ignition Lock Cylinder CSA1417

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest – Ignition Lock Cylinder (Part No.CS901L)

Ignition Lock Cylinder

from

$78.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Locksmart – Ignition Lock Cylinder (Part No.LC64750)

Ignition Lock Cylinder

from

$78.99
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Ignition Lock Cylinder: Un-Coded (Part No.924-721)

Ignition Lock Cylinder: Un-Coded

from

$43.49
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:
  • Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
  • Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Ignition Lock Cylinder CSA4222 (Part No.CSA4222)

Ignition Lock Cylinder CSA4222

from

$59.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Dorman – Dorman Ignition Lock Cylinder (Part No.M5040306783DOR)

Dorman Ignition Lock Cylinder

from

$66.82
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:
  • Direct replacement and operation
  • Includes easy to follow instructions with no need for any specialized tools or equipment
  • Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
See More

Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920720A)

Overrunning Alternator Decoupling (OAD) Pulley - Original Equipment Quality

from

$135.99
Litens Automotive is the original equipment supplier to Chrysler for this Jeep decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should not be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 50,000 – 60,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Patented Original Equipment Design
  • Protects the alternator and other front-end accessory drive components.
  • Installation instructions included.
  • New plastic cap included with the OAD.
  • Tools Required – Litens recommends using Miller Special Tools P/N 8433A and a torque wrench.
  • Professional mechanics can install this replacement OAD in approximately 1/2 hours. During alternator replacement, belts, tensioners, and routing pulleys should be inspected.
  • 57.5mm O.D.; 17mm I.D; 45mm width; ribbed running surface for a 6-rib serpentine belt; high-grade steel construction. 17mm Hex bit driver Included for ease of installation.
See More

Carquest Premium – Alternator Connector (Part No.PTA1445)

Alternator Connector

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Upgrade your 2005 Jeep Liberty with Top-Quality Alternators and Starters

When it comes to maintaining or upgrading your 2005 Jeep Liberty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Alternators and Starters are key to keeping your Liberty functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Alternators and Starters for the 2005 Jeep Liberty, designed to meet your needs without breaking the bank. From Starter Part replacements to Alternator Pulley Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 2005 Jeep Liberty at great prices. Our Alternators and Starters inventory for this model ranges from just $38.99 to $272.99, with an average price of $163.09. Our 19 Alternators and Starters in stock come from 10 trusted brands, so you’re sure to find the right part for your 2005 Jeep Liberty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Jeep Liberty, we stock popular OEM and aftermarket Alternators and Starters from top names like Carquest Premium Locksmart, and more. Carquest Premium Alternators and Starters start at just $38.99 and boast an impressive 4 stars average rating from customers. With 654 customer reviews and counting, our 2005 Jeep Liberty Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Jeep Liberty is always ready to roll. We’re committed to providing you with everything you need to keep your Liberty in top shape, all in one place. Start shopping confidently below for your 2005 Jeep Liberty!

Best-Selling Starter Parts for 2005 Jeep Liberties

Enhance the driving experience in your Jeep with 9 quality Starter Part components, starting at $117.82.

Carquest Premium – Starter Remanufactured Premium (Part No.17882S)

Starter Remanufactured Premium

from

$153.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • 100% remanufactured drive clutch assembly ensures lasting performance
  • Armatures and commutators are 100% load tested
  • New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

WAI – 1.2kW/12 Volt, CW, 10-Tooth Pinion (Part No.17882N)

1.2kW/12 Volt, CW, 10-Tooth Pinion

from

$139.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

Carquest Professional – Starter-New (Part No.17882SN)

Starter-New

from

$171.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10356
See More

DENSO – First Time Fit Starter, Remanufactured (Part No.F5000307984ND)

First Time Fit Starter, Remanufactured

from

$201.04
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.

Product Features:
  • High-voltage tested armature and field coils to ensure reliable performance
  • Premium copper terminals to ensure a clean source of electrical current
  • All-new bearings, brushes, and seals
  • Maximum cranking torque under all conditions
  • Class leaders in size and weight
  • Environmentally designed to start in cold and hot weather conditions
See More

WAI – 1.2kW/12 Volt, CW, 10-Tooth Pinion (Part No.17897N)

1.2kW/12 Volt, CW, 10-Tooth Pinion

from

$197.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

Bosch – Professional Preferred Starter, Remanufactured (Part No.F50001332746BOS)

Professional Preferred Starter, Remanufactured

from

$253.18
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers. Bosch 24 Month Roadside Protection Plan Only Bosch offers the peace-of-mind of this value-added totally FREE, emergency roadside assistance program. Simply stated, if any Bosch Premium Alternator or Starter fails within two years of the date of purchase, Bosch will provide a free jump-start or tow from a qualified roadside service provider. This exclusive Bosch service is available 24 hours a day, seven days a week, anywhere in the United States or Canada.

Product Features:
  • Built to last using the highest quality materials and the most technologically advanced manufacturing processes
  • Remanufactured using more new parts than any other unit
  • 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
  • Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
  • 24-month unlimited mileage warranty Remanufacturing Process
  • Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
  • 100% new long life self-lubricating brushes
  • Gear train all new bushings
  • Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
  • Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
  • Commutator remachined to Bosch tight tolerances
  • Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
  • Armature continuity tested, gauged, straightened and shimmed
  • All electrical connections resoldered
  • All shaft splines and load bearing surfaces lubricated with OE high temperature grade
See More

WAI – 2.2kW/12 Volt, CW, 10-Tooth Pinion (Part No.17940N)

2.2kW/12 Volt, CW, 10-Tooth Pinion

from

$272.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

OE+ – Remanufactured Starter (Part No.F50002003726IAP)

Remanufactured Starter

from

$229.59
When your vehicle needs a new starter, you need to treat your car right. Replace it with a Premium Quality remanufactured starter from OE+. All of our starters are completely remanufactured to meet or exceed O.E. specifications. The solenoid is completely remanufactured or replaced with new. The brush plate holder is cleaned and plated for corrosion prevention. The armature is tested and recoated. The commutator is remachined or replaced for proper brush contact. The drive is completely remanufactured or replaced. The gear is chamfer checked. All housings are cleaned and refinished to prevent corrosion.

Product Features:
  • OE-Equivalent Direct Fit Application.
  • Fully tested to meet OE specifications.
  • Provides exceptional reliability.
See More

Reliance – Tech Starter (Reman) (Part No.F5000846956RLN)

Tech Starter (Reman)

from

$117.82
TOTALLY REMANUFACTURED FROM THE INSIDE-OUT – W/Core Reliance’s remanufactured starters are re-engineered from the inside-out to exacting standards for unsurpassed reliability. Our engineers perform extensive failure-analysis on in-field OE units and update designs to rectify common causes of failures and improve dependability. Once design enhancements have been proven, our extensive remanufacturing process includes total core disassembly, extensive component replacement and stringent three-phase testing to ensure that every starter delivers the quality you can depend on – with every turn of the key.

Product Features:
  • Top 5 component re-engineering:
  • 100% NEW solenoid contacts
  • Precision-machined drive clutch
  • 100% NEW brushes
  • Test 1 – Initial sample approvals test all components to validate specifications and functionality.
  • Test 2 – All critical sub-assemblies are 100% tested on specialized equipment prior to final assembly.
  • Test 3 – Completed units are individually end-of-line tested on proprietary, load-based testers across a full range of operating requirements.
  • Test +: Random unit audit testing. Reliance Road Assist Card – May 1 2014
See More

Most Popular 2005 Jeep Liberty Alternator Pulley Parts

Customize your Jeep with 1 Alternator Pulley Parts products like Alternator Decoupler Pulleys, all priced under $135.99.

Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920720A)

Overrunning Alternator Decoupling (OAD) Pulley - Original Equipment Quality

from

$135.99
Litens Automotive is the original equipment supplier to Chrysler for this Jeep decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should not be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 50,000 – 60,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Patented Original Equipment Design
  • Protects the alternator and other front-end accessory drive components.
  • Installation instructions included.
  • New plastic cap included with the OAD.
  • Tools Required – Litens recommends using Miller Special Tools P/N 8433A and a torque wrench.
  • Professional mechanics can install this replacement OAD in approximately 1/2 hours. During alternator replacement, belts, tensioners, and routing pulleys should be inspected.
  • 57.5mm O.D.; 17mm I.D; 45mm width; ribbed running surface for a 6-rib serpentine belt; high-grade steel construction. 17mm Hex bit driver Included for ease of installation.
See More

Top Picks for 2005 Jeep Liberty Ignition Lock Parts

Upgrade Jeep Liberties with top-quality Ignition Lock Parts parts, including 2 OEM and aftermarket selections for your 2005 model.

Locksmart – Ignition Lock Cylinder (Part No.LC64750)

Ignition Lock Cylinder

from

$78.99
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
  • Constructed from high-grade materials to ensure durability and longevity
  • Undergoes 100% testing for proper fit, form, and function
  • As a global manufacturer, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Dorman Ignition Lock Cylinder (Part No.M5040306028DOR)

Dorman Ignition Lock Cylinder

from

$191.12
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:
  • Direct replacement and operation
  • Includes easy to follow instructions with no need for any specialized tools or equipment
  • Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
See More

In-Demand Alternator Parts for 2005 Jeep Liberties

Select from 7 premium Alternator Parts parts for your 2005 Jeep Liberty, with prices ranging from $38.99 to $236.38.

Carquest Premium – Alternator: Remanufactured, 136 Amps (Part No.13873A)

Alternator: Remanufactured, 136 Amps

from

$173.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator: Remanufactured, 160 Amps (Part No.13913A)

Alternator: Remanufactured, 160 Amps

from

$171.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • 100% new OE-quality brushes and bearings are used to ensure long service life
  • Rotors and stators are load tested and double insulated for maximum charging performance
  • Slip rings are precision polished for maximum brush contact and service life
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Alternator Connector (Part No.PTA1445)

Alternator Connector

from

$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

WAI – Alternator: New, 136 Amps (Part No.13873N)

Alternator: New, 136 Amps

from

$204.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
See More

Bosch – Professional Preferred Alternator, Remanufactured (Part No.F4000162200BOS)

Professional Preferred Alternator, Remanufactured

from

$236.38
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:
  • Built to last using the highest quality materials and the most technologically advanced manufacturing processes
  • Remanufactured using more new parts than any other unit
  • 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
  • Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
  • Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
  • Rectifier 100 % tested (new on Ford)
  • Diodes 100% tested (replaced with new as required)
  • Rotor 100% performance-tested for maximum electrical output
  • 100% new long life sealed bearings with special high load, high temperature grease
  • Stator 100% insulation and phase balance tested
  • Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
  • 100% new long life self-lubricating brushes
  • 100% new clutch pulleys
  • All terminals, insulators and hardware provided
See More

OE+ – Alternator (Part No.F40002246453IAP)

Alternator

from

$194.29
Alternator

OE+ – Remanufactured Alternator (Part No.F40002246272IAP)

Remanufactured Alternator

from

$164.40
Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.

Product Features:
  • OE-Equivalent Direct Fit Application.
  • Fully tested to meet OE specifications.
  • Provides exceptional reliability.
See More

Top-Rated Alternators and Starters Brands For Your 2005 Jeep Liberty

Shop for the best-rated brands offering Alternators and Starters and other products for your 2005 Jeep Liberties. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium and Locksmart, and more. Alternators and Starters from these brands that fit a 2005 Liberty start at just $38.99 and are rated as high as 4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2005 Jeep Liberty Alternators and Starters

When it comes to maintaining or upgrading your 2005 Jeep Liberty, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 2005 Jeep Liberty. With over 4 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $38.99, with an average price of just $134.74. Plus, with over 216 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Alternator: Remanufactured, 136 Amps
from
$173.99

(100)

Alternator: Remanufactured, 136 Amps

“Exactly what I needed”

Alternator Connector
from
$38.99
This product is not rated

Alternator Connector

“”

Alternator: Remanufactured, 160 Amps
from
$171.99

(85)

Alternator: Remanufactured, 160 Amps

“Doing just fine no problems, 5 star”

Popular Locksmart 2005 Jeep Liberty Alternators and Starters

Locksmart auto parts is one of the highest quality Alternators and Starter brands in the market. Any 2005 Jeep Liberty owner should feel confident when installing genuine Locksmart parts in their vehicle. To ensure the best fit and performance for your 2005 Liberty, Advance Auto Parts carries a full inventory of 1 Locksmart Alternators and Starters. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Locksmart Alternators and Starters range up to $78.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.

Ignition Lock Cylinder
from
$78.99

(1)

Ignition Lock Cylinder

“Perfect fit. Very easy to install.”

FAQs for 2005 Jeep Liberty Alternators and Starters

Which Alternators and Starters are best-sellers for 2005 Jeep Liberties?

Out of 19 Alternators and Starters that fit 2005 Jeep Liberties, the following parts are the top sellers:

What’s the price range for 2005 Jeep Liberty Alternators and Starters?

Alternators and Starter prices for the 2005 Jeep Liberty start at $38.99 and go up to $272.99 for the most premium parts.

What’s the average price of a Alternators and Starter for a 2005 Jeep Liberty?

The average price for Alternators and Starters for the 2005 Jeep Liberty is $163.09. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Alternators and Starters for other Jeep Liberty model years?

Yes, we currently carry Alternators and Starters for 10 model years of Jeep Liberties between 2002 and 2012. Alternators and Starters are bought most frequently for the following model years: 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2004, and 2003.

What are the cheapest Alternators and Starters for my 2005 Jeep Liberty?

The cheapest 2005 Jeep Liberty Alternators and Starters we carry in stock are:

What are the top-rated Alternators and Starters that fit the 2005 Jeep Liberty?

Out of 654 reviews by customers, our 2005 Jeep Liberty Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 2005 Jeep Liberty and their top-rated products:

What types of Alternators and Starters do you sell for my 2005 Jeep Liberty?

As of 2/5/25, these are some of the most in-demand types of Alternators and Starters for a 2005 Jeep Liberty:

Can I get help with 2005 Jeep Liberty Alternators and Starter orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Alternators and Starters and more.

What is your return policy for Jeep Liberty Alternators and Starters?

Advance Auto Parts keeps returns simple. For new Jeep Liberty Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.