2005 GMC Sierra 1500 Shocks and Struts

Essential 2005 GMC Sierra 1500 Shocks and Struts

Skyjacker – 1.5"Lift, With Centering Pins/ Without U-Bolts, Set Of 2 (Part No.R1115)

1.5"Lift, With Centering Pins/ Without U-Bolts, Set Of 2

from

$124.99
Softride(R) is the best way of describing the ride quality of our long Add A Leafs. The Softride(R) long Add A Leafs will bring new life and lift to your fatigued stock springs. And you can rest easy knowing that the Skyjacker(R) Softride(R) technology is at work in each pair. Also available are the Heavy Duty Add A Leafs. These units are shorter and are designed for extra payload capacity. Tie bolts are included in each pair of Skyjacker(R) Add A Leafs. Also available are fitted leafs. Fitted leafs are designed as an option exclusively for Skyjacker(R) Softride(R) lifted leaf springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing away tire carrier, all your extra gear, etc.

Product Features:
  • Softride(R) Long Add A Leafs Will Bring New Life And Lift To Your Fatigued Stock Springs And You Can Rest Easy Knowing That The Skyjacker(R) Softride(R) Technology Is At Work In Each Pair
  • Add-A-Leafs Available Are The Heavy-Duty, Units Are Shorter And Are Designed For Extra Payload Capacity
  • Tie Bolts Are Included In Each Pair Of Skyjacker(R) Add A Leafs
  • Add-A-Leafs Also Available Are Fitted Leafs. Fitted Leafs Are Designed As An Option Exclusively For Skyjacker(R) Softride(R) Lifted Leaf Springs
  • Fitted Leaf Springs Are Used When The Additional Weight Of Aftermarket Accessories Are Installed Such As Heavy Winch Bumper, An Engine Conversion, A Swing Away Tire Carrier, All Your Extra Gear, Etc.
See More

Timbren SES – Rubber Spring, Frame Mount, 8,000 Lb Weight Capacity Per Set, Aeon Hollow Rubber (Part No.GMRTT35S)

Rubber Spring, Frame Mount, 8,000 Lb Weight Capacity Per Set, Aeon Hollow Rubber

from

$454.99
Timbren Suspension Enhancement System – The Decision is Easy…Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Improve load handling Haul heavy loads with ease Eliminate sag and sway

Product Features:
  • Eliminate Suspension Sag When Towing A Heavy Trailer Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway A Condition Which Occurs With Unbalanced Loads In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 14000Lb, Aeon Hollow Rubber (Part No.GMFK15CA)

Rubber Spring, Inside Coil Spring Mount, 14000Lb, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Dorman – AIR SUSPEN UPFIT KIT (Part No.949-042)

AIR SUSPEN UPFIT KIT

from

$533.99
Air springs can offer improved load handling when working in combination with an original equipment suspension. This suspension air helper spring kit includes the equipment needed to add air springs on specified vehicles.

Product Features:
  • Ideal solution – this air suspension upfit kit can compensate for rear suspension sagging or squatting under load or when towing by providing added support to maintain vehicle height and handling
  • Effective retrofit – designed for cost-effective installation, easy air spring inflation, and durability that can help protect the vehicle from damage to the vehicle frame and suspension components
  • Complete kit – includes 2 air springs, 2 braided stainless steel air lines, valves, mounting brackets, and all hardware needed for installation, with no drilling, welding, or special tools required
  • Exclusive design – the air springs in this kit feature a patent-pending fail-safe design that includes a stout internal coil spring
See More

KYB – Strut Mounting Kit (Part No.L3033392370KYB)

Strut Mounting Kit

from

$94.69
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Dorman – Upper Shock Mounting Bushing Insulator (Part No.905-500)

Upper Shock Mounting Bushing Insulator

from

$28.99
This shock mount insulator is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Rear Upper Shock Mount (Part No.523-288)

Rear Upper Shock Mount

from

$105.99
Replace a rusted or broken shock absorber mount with this replacement. Engineered for durable performance, it matches the fit and performance of the original equipment shock mount to restore proper shock absorber function.

Product Features:
  • Ideal solution – this bracket replaces an original mount that is rusted, broken, or damaged from collision impact, and helps restore proper shock absorber function
  • Ensure fit – matches the fit, function and performance of the original shock absorber mounting bracket on specified vehicles
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Front Upper Shock Insulator (Part No.905-499)

Front Upper Shock Insulator

from

$23.99
This shock mount insulator is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

ReadyLift – Set Of 2, With Hardware (Part No.67-3809)

Set Of 2, With Hardware

from

$76.99
The 5125 series offers Bilstein technology for custom applications. 5125 series shocks feature Bilstein superior single tube, high gas pressure design for the utmost in consistent fade free performance and long life. Bilstein patented deflective self-adjusting valving delivers improved damping control and a smooth ride on all road surfaces at any speed.

Product Features:
  • Designed To Be Use With Factory Shocks On 3 Inch Rear Lift Blocks
  • Powder Coated Steel Shock Extensions Install In The Factory Upper Rear Shock Mount To Greatly Decrease The Chance Of Over-Extending The Factory Shocks
  • Made In USA
See More

Rancho – RS5000 Shock Absorber (Part No.RS5269)

RS5000 Shock Absorber

from

$69.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:
  • Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
  • 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
  • 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
  • Protective boot included – Protects the shock rod and oil seal
See More

Monroe – Gas-Magnum Shock Absorber (Part No.34678)

Gas-Magnum Shock Absorber

from

$104.99
Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Skyjacker – Hydro Shock W/Red Boot (Part No.H7036)

Hydro Shock W/Red Boot

from

$55.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG54342)

High Pressure Monotube Gas Shock

from

$113.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and con

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Gm Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Belltech – Nitrogen Gas Charged, Two Year Warranty, Non Adjustable Valving, Single (Part No.10103I)

Nitrogen Gas Charged, Two Year Warranty, Non Adjustable Valving, Single

from

$85.99
Belltech street performance shock absorber has been engineered to provide a premium quality ride for todays larger Trucks and Luxury SUVs. Belltech engineers have developed a great balance between comfort and performance by focusing their attention on tuning the low speed compression and rebound characteristics of this shock absorber

Product Features:
  • Belltech Value Orientated Performance Shock Absorber. The Ultimate In Premium Street Performance Solution
  • Excellent OEM Quality Replacement Upgrade. Internal Teflon Coated Bushings And Piston Seals Avoid Metal To Metal Contact, Provides Lowest Possible Friction Resulting In Long Lasting Performance
  • Oversized Construction Provides Additional Damping Control. Increase In Handling And Performance At Maximum Comfort
  • Complements Larger OE And Aftermarket Wheel Or Tire Packages For Increased Tire Contact Area
See More

Monroe – RoadMatic Complete Strut Assembly (Part No.189105)

RoadMatic Complete Strut Assembly

from

$178.99
RoadMatic(TM) strut assemblies include all the components required for strut replacement in a single, fully-assembled unit. This fully integrated design helps reduce installation time, eliminating the need for a spring compressor, ensuring a complete repair. RoadMatic strut assemblies feature nitrogen gas charging, velocity proportional valving and all-weather fluid to deliver improved comfort at an economical price.

Product Features:
  • Nitrogen gas charge and all-weather fluid deliver improved comfort
  • Meets OE product specifications
  • Available for older model-year passenger cars, light trucks, and SUVs.
  • An economical replacement alternative to ensure a complete repair
See More

Skyjacker – Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.M9536)

Nitrogen Gas Charged, Limited Lifetime Warranty, Non-Adjustable, Single

from

$117.99
Skyjacker new M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever

Product Features:
  • Monotube Design. Fastest Responding Shock Ever
  • Dirt Seal Protection For Oil Seal And Rod Bearing
  • High Pressure Nitrogen Gas Charged
  • Custom Tuned For Each Vehicle
  • No Fade Or Lag For Consistent Performance
  • 180 Degree Directional Mounting
  • No Fade Or Lag For Consistent Performance
See More

Rancho – RS5000X Strut (Part No.RS55785)

RS5000X Strut

from

$255.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X struts deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and application-specific sintered iron piston for enhanced structural integrity
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 60 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

Rancho – RS9000XL Strut (Part No.RS999784)

RS9000XL Strut

from

$319.99
Get premium control and performance with Rancho RS9000®XL struts. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL struts are ideal for on- and off-road use, towing and more.

Product Features:
  • NINE LEVELS OF PERFORMANCE — Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
  • DESIGNED FOR HARDWORKING VEHICLES — Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
  • INDUSTRY FIRST — Recognized as the first nine-position manually adjustable shock series in the off-road market
  • REDUCES FADE — Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
  • STRONG AND DURABLE — Features an application-specific nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and sintered iron piston for enhanced structural integrity
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish ensures long life
  • Delivers both performance and appearance
  • Added strength and durability
  • Provided 9 different levels of strut performance
  • Premium long lasting finish
  • Enhances strut performance and durability
  • Added protection for the strut rod and oil seal
See More

MOOG – Shock Absorber Bushing (Part No.K6724)

Shock Absorber Bushing

from

$34.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

MOOG – Strut Bumper (Part No.K201939)

Strut Bumper

from

$24.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
  • STRONG AND DURABLE — Engineered to match or exceed OE requirements
  • RESTORES RIDE — Provides revamped steering and handling feel
  • QUIET DRIVE — Replacement can reduce front end noise
See More

2005 GMC Sierra 1500 Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 2005 GMC Sierra 1500. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 81 different Shocks and Struts in our inventory ranging from $23.99 to $533.99. That means you can find the exact parts or products you need to keep that 2005 GMC Sierra 1500 running smoothly.

Shocks and Struts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2005 GMC Sierra 1500. Monroe, Rancho, and KYB are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 2005 GMC Sierra 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 15,975 reviews in this category, some of the top rated parts include Gas-Matic LT Shock Absorber with 4.2 stars and Gas-Matic LT Shock Absorber with 4.6 stars.

So if you’re in the market for aftermarket Shocks and Struts to keep your 2005 GMC Sierra 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 2005 GMC Sierra 1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 GMC Sierra 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your Sierra 1500 the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

FAQs for 2005 GMC Sierra 1500 Shocks and Struts

What are the most purchased Shocks and Struts for the 2005 GMC Sierra 1500?

Out of 81 Shocks and Struts for the 2005 GMC Sierra 1500, the most popular in our inventory are:
Gas-Matic Truck Shock Absorber
from $67.99
(51)
Gas-Matic Truck Shock Absorber
Front Shock and Struts
Gas-Matic Truck Shock Absorber
from $65.99
(44)
Gas-Matic Truck Shock Absorber
Rear Shock and Struts
Reflex Monotube Shock Absorber
from $84.99
(57)
Reflex Monotube Shock Absorber
Rear Shock and Struts

What are the top-rated 2005 GMC Sierra 1500 Shocks and Struts?

Top-rated Shocks and Struts for your 2005 GMC Sierra 1500 based on customer reviews/ratings are:
Gas-Matic LT Shock Absorber
from $44.49
(41)
Gas-Matic LT Shock Absorber
“good replacement”
Gas-Matic LT Shock Absorber
from $44.49
(36)
Gas-Matic LT Shock Absorber
“My old ’01 Silverado rides like new again.”
OESpectrum Light Truck Shock Absorber
from $93.99
(28)
OESpectrum Light Truck Shock Absorber
“03′ Silverado ext can 2wd I tow a 16′ trailer usually loaded with lumber for work, also horse trailers. These really tightened up the front end, along”