2005 Freightliner Sprinter 2500 Cooling and Climate Controls

Name: A/C Compressor w/ Clutch, New
Brand: Behr
SKU: R1000954900BEH
Price: 443.93 USD

Below you will find various in-demand Freightliner Cooling and Climate Controls, components and accessories for your 2005 Sprinter 2500. Advance Auto Parts has popular Sprinter 2500 parts like Blower Motor and Related Products, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Sprinter 2500 model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2005 Freightliner Sprinter 2500 Cooling and Climate Controls below and start saving instantly.

Popular 2005 Freightliner Sprinter 2500 Cooling and Climate Controls Categories

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Radiator Fan Clutch

Radiator Caps

AC Compressor Without Clutch

Thermostats

Thermostat and Water Outlet Assemblies

Coolant Temperature Sensors

Heater Cores

Cabin Air Temperature Sensors

Blower Motor Resistors

AC Condensers

AC Compressor Bypass Pulleys

OE Cooling Fan Blades

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

ABS Speed Sensors

AC Actuator Switches

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC Compressor Cut-Off Switches

AC Control Switches

Blower Switches

Radiator Cap Adapters

Essential Cooling and Climate Controls for 2005 Freightliner Sprinter 2500s

from

$443.93

Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
Equipped with a new clutch assembly
OEM supplier to many European vehicle manufacturers

from

$60.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$203.61

Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$8.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$121.53

Thermostat

from

$202.99

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.

Product Features:

CARQUEST Premium Fan Clutch
5″ thermal import/compact
Designed, tested and built by application
OE performance, fit and appearance

from

$376.99

HVAC Cut-Off Switch

from

$83.78

The Febi/Bilstein Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$153.18

The Bosch OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

from

$274.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$197.51

Blower Motor

from

$38.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$151.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$448.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance

from

$90.92

A/C Pressure Switch

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$26.99

from

$60.58

A/C Receiver Drier

from

$823.99

from

$274.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$214.99

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.56

Water Pump Gasket

from

$124.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$73.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$142.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$91.99

Upgrade your 2005 Freightliner Sprinter 2500 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 Freightliner Sprinter 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Freightliner or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Sprinter 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 54 Cooling and Climate Controls for the 2005 Freightliner Sprinter 2500, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2005 Freightliner Sprinter 2500 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $8.79 to $855.99, with an average price of $166.34. Our 54 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 2005 Freightliner Sprinter 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Freightliner Sprinter 2500, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Carquest Premium Motorad, and more. Carquest Premium Cooling and Climate Controls start at just $8.79 and boast an impressive 4 stars average rating from customers. With 21 customer reviews and counting, our 2005 Freightliner Sprinter 2500 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Freightliner Sprinter 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sprinter 2500 in top shape, all in one place. Start shopping confidently below for your 2005 Freightliner Sprinter 2500!

Best-Selling Blower Motor and Related Products for 2005 Freightliner Sprinter 2500s

Enhance the driving experience in your Freightliner with 5 quality Blower Motor and Related Product components, starting at $9.49.

show more show less

from

$235.07

Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:

OEM Quality.
Direct Fit Replacement.
Highly efficient
Quiet-running
Meets or exceeds OE design and performance.

from

$82.62

The ACM Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

from

$60.99

from

$44.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$9.49

Most Popular 2005 Freightliner Sprinter 2500 Air Conditioning Parts

Customize your Freightliner with 23 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $855.99.

show more show less

from

$71.88

A/C Pressure Switch

from

$36.49

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$274.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$439.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$279.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$52.99

Rein OE Quality Receiver Drier. If the OES manufacturer fits a high pressure safety valve and or sight glass, the equivalent Rein Automotive Receiver Drier will also be fitted with one. All Rein Automotive Receiver Driers are pressure tested after manufacturing to ensure high quality.

from

$41.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$219.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Low Friction Hinge Bearing Mechanism.
High efficiency Low Mass Hollow Piston.

from

$73.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$855.99

from

$823.99

from

$443.93

Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
Equipped with a new clutch assembly
OEM supplier to many European vehicle manufacturers

from

$376.99

HVAC Cut-Off Switch

from

$329.03

A/C Compressor

from

$233.48

A/C Condenser

from

$216.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$139.41

A/C Condenser

from

$90.92

A/C Pressure Switch

from

$80.73

ABS Speed Sensor

from

$71.70

The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meets or exceeds the vehicle manufacturer specifications.
Utilizes factory style fittings and connectors.
Includes the required o-rings and associated hardware

from

$58.99

New Standard Replacement A/C Expansion Valve

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.92

A/C Receiver Drier

from

$26.99

Top Picks for 2005 Freightliner Sprinter 2500 Engine Cooling Parts

Upgrade Freightliner Sprinter 2500s with top-quality Engine Cooling Parts parts, including 24 OEM and aftermarket selections for your 2005 model.

show more show less

from

$9.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$68.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$8.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$14.29

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$25.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$151.99

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$333.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$202.99

CARQUEST Premium Fan Clutch
5″ thermal import/compact
Designed, tested and built by application
OE performance, fit and appearance

from

$58.37

CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:

Comfort enhancement by a faster cabine warming
CO2 emissions and fuel consumption reduction
Thermostat opening driven by the ECU (electrical thermostat)
An adaptation of the control strategies to the vehicle use (electrical thermostat)

from

$292.99

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$366.38

Radiator

from

$264.00

FAN CLUTCH

from

$262.18

Fan Clutch

from

$203.61

OE Quality, reliability and service life
Leak-proof sealing of the drive
Fuel savings and reduced emissions
Cooling even without operation of the engine
CO²-reduction by optimized efficiency, speed control and reduced weight
Coverage of a wide hydraulic performance range
Reduced noise level

from

$193.99

Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$175.75

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$128.67

Water Pump

from

$123.56

Fan Clutch

from

$83.78

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$54.64

Thermostat Assembly

from

$15.79

WATER TEMP. SENSOR

from

$14.99

Rein Automotive OE temperature sensors are made to factory specifications ensuring proper fit, form and function. The temperature sensor is used to report exhaust temperatures to the vehicle’s ECU. The vehicle uses this information to control engine and emission paramaters. Rein temperature sensors include a vehicle specific connector that fits directly into the factory plug. Our quality temperature sensors aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component.

Product Features:

Direct OE replacemet
Designed to meet or exceed factory specifications
Made using high quality materials
Uses vehicle specific style connector for quick replacement.

from

$10.65

Radiator Cap

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

In-Demand HVAC Electrical Parts for 2005 Freightliner Sprinter 2500s

Select from 1 premium HVAC Electrical Parts parts for your 2005 Freightliner Sprinter 2500.

show more show less

from

$91.99

Most Sold 2005 Freightliner Sprinter 2500 Heating Parts

Explore our best-selling Freightliner parts for the 2005 Sprinter 2500 among 1 OEM and aftermarket options starting from $109.99.

show more show less

from

$109.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Top-Rated Cooling and Climate Controls Brands For Your 2005 Freightliner Sprinter 2500

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2005 Freightliner Sprinter 2500s. Below you’ll find some of our best rated Cooling and Climate Controls from Carquest Premium and Motorad, and more. Cooling and Climate Controls from these brands that fit a 2005 Sprinter 2500 start at just $8.79 and are rated as high as 4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2005 Freightliner Sprinter 2500 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2005 Freightliner Sprinter 2500, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Cooling and Climate Controls, specifically designed for the 2005 Freightliner Sprinter 2500. With over 23 Carquest Premium brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.79, with an average price of just $209.06. Plus, with over 19 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$151.99

This product is not rated

Engine Water Pump: New, Gasket/Seals Included

“”

from
$14.29

This product is not rated

Radiator Cap Tester Adapter

“”

from
$25.99

This product is not rated

Coolant Temperature Sensor with O-Ring

“”

Popular Motorad 2005 Freightliner Sprinter 2500 Cooling and Climate Controls

Motorad auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2005 Freightliner Sprinter 2500 owner should feel confident when installing genuine Motorad parts in their vehicle. To ensure the best fit and performance for your 2005 Sprinter 2500, Advance Auto Parts carries a full inventory of 1 Motorad Cooling and Climate Controls. Plus you will be keeping your Freightliner in peak condition while saving money because prices on these Motorad Cooling and Climate Controls range up to $68.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$68.99

(1)

Integrated Thermostat Housing: With Seal, 189 Degrees

“OE Part matched”

FAQs for 2005 Freightliner Sprinter 2500 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2005 Freightliner Sprinter 2500s?

Out of 54 Cooling and Climate Controls that fit 2005 Freightliner Sprinter 2500s, the following parts are the top sellers:

Radiator Cap Tester Adapter (17090217) – $14.29
Coolant Temperature Sensor with O-Ring (12422743) – $25.99
Engine Water Pump: New, Gasket/Seals Included (15760045) – $151.99

What’s the price range for 2005 Freightliner Sprinter 2500 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2005 Freightliner Sprinter 2500 start at $8.79 and go up to $855.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2005 Freightliner Sprinter 2500?

The average price for Cooling and Climate Controls for the 2005 Freightliner Sprinter 2500 is $166.34. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Freightliner Sprinter 2500 model years?

Yes, we currently carry Cooling and Climate Controls for 19 model years of Freightliner Sprinter 2500s between 2002 and 2021. Cooling and Climate Controls are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Cooling and Climate Controls for my 2005 Freightliner Sprinter 2500?

The cheapest 2005 Freightliner Sprinter 2500 Cooling and Climate Controls we carry in stock are:

Radiator Cap: 20 PSI (17110023) – $8.79
Engine Water Pump Gasket (12600375) – $8.79
Radiator Cap: 20 PSI (10049228) – $9.49
HVAC Blower Fan Switch (12521724) – $9.49
Radiator Cap (12488421) – $10.65

What are the top-rated Cooling and Climate Controls that fit the 2005 Freightliner Sprinter 2500?

Out of 21 reviews by customers, our 2005 Freightliner Sprinter 2500 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2005 Freightliner Sprinter 2500 and their top-rated products:

Engine Cooling Parts
- Integrated Thermostat Housing: With Seal, 189 Degrees (11610944) – $68.99
- Radiator Cap: 20 PSI (10049228) – $9.49
- Radiator Cap: 20 PSI (17110023) – $8.79

What types of Cooling and Climate Controls do you sell for my 2005 Freightliner Sprinter 2500?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2005 Freightliner Sprinter 2500:

Can I get help with 2005 Freightliner Sprinter 2500 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Freightliner Cooling and Climate Controls and more.

What is your return policy for Freightliner Sprinter 2500 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Freightliner Sprinter 2500 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Freightliner Sprinter 2500 Cooling and Climate Controls

Behr – A/C Compressor w/ Clutch, New (Part No.R1000954900BEH)

Carquest Premium – HVAC Blower Control Switch (Part No.SBA1854)

Bosch – Auxiliary Water Pump (Part No.G305028293BOS)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)

Calorstat – Thermostat (Part No.G4000452334CAL)

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.216031)

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2034)

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Bosch – ABS Speed Sensor (Part No.N60302392139BOS)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813254)

ACM – Blower Motor (Part No.R2031516750ACM)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39211)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4186)

Carquest Premium – New Compressor with Clutch, Nippondenso 6SAS14C (Part No.T168324)

Santech – A/C Pressure Switch (Part No.R1054768236SII)

Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1122)

Carquest Premium – HVAC Control Switch (Part No.BLN1196)

APA/URO Parts – A/C Receiver Drier (Part No.R1040398637APA)

Carquest Premium – HVAC Control Switch (Part No.BLN1068)

Carquest Premium – A/C Condenser (Part No.713405)

Carquest Premium – Integrated Thermostat Housing: With Sensor, With Gasket, 212 Degrees (Part No.49452)

Elring – Water Pump Gasket (Part No.G3040656911ELR)

Dorman – BMR (Part No.973-238)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34228)

Carquest Premium – Heater Core (Part No.918042)

Carquest Premium – Cabin Air Temperature Sensor (Part No.WTA1909)

Behr – Behr Blower Motor (Part No.R2031444541BEH)

ACM – Blower Motor Resistor (Part No.R2032440603ACM)

Carquest Premium – HVAC Blower Control Switch (Part No.SBA1854)

Dorman – Blower Motor Speed Resistor (Part No.973-041)

Carquest Premium – HVAC Blower Fan Switch (Part No.ACA1262)

ACM – A/C Pressure Switch (Part No.R1054768236ACM)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39243)

Carquest Premium – A/C Condenser (Part No.713405)

Carquest Premium – A/C New; w/ Clutch; w/ 10S17C Compressor (Part No.T198371)

Carquest Premium – A/C Condenser (Part No.3214)

Rein – A/C Receiver Drier (Part No.ACD0219R)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83114)

Carquest Premium – A/C New, with Clutch, with 7SB16C Compressor (Part No.T78356)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34228)

Carquest Premium – HVAC Control Switch (Part No.BLN1291)

Carquest Premium – HVAC Control Switch (Part No.BLN1068)

Behr – A/C Compressor w/ Clutch, New (Part No.R1000954900BEH)

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2034)

Autopart International Inc – A/C Compressor (Part No.R10003200338API)

Nissens – A/C Condenser (Part No.R1030218812NSS)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC2105)

Koyo Cooling – A/C Condenser (Part No.R1030218701KCS)

Santech – A/C Pressure Switch (Part No.R1054768236SII)

WSO – ABS Speed Sensor (Part No.N6030424308WSO)

ACM – A/C Receiver Drier (Part No.R1040144879ACM)

KAI – A/C Expansion Valve (Part No.ACX011034)

Autopart International Inc – A/C Receiver Drier (Part No.R10403307440API)

Carquest Premium – HVAC Control Switch (Part No.BLN1196)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)

Motorad – Integrated Thermostat Housing: With Seal, 189 Degrees (Part No.501-189)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1075)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4186)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.434002)

Carquest Premium – Universal Fan Clutch – 5" Thermal Import/Compact (Part No.216031)

Calorstat – Thermostat (Part No.G40001610424CAL)

Dorman – Auxiliary Coolant Pump (Part No.902-088)

Autopart International Inc – Radiator (Part No.G10001959615API)

Worldpac – FAN CLUTCH (Part No.G5010458608FEB)

Vemo – Fan Clutch (Part No.G50101342953VMO)

Bosch – Auxiliary Water Pump (Part No.G305028293BOS)

Carquest Premium – Engine Electric Water Pump: New, Plastic/Steel Housing (Part No.T1585)

Geba – Geba Water Pump (Part No.G3000218902GEB)

Autopart International Inc – Water Pump (Part No.G30001951342API)

Autopart International Inc – Fan Clutch (Part No.G50102015579API)

Febi – Bilstein Engine Cooling Fan Blade (Part No.G505014303FEB)

Autopart International Inc – Thermostat Assembly (Part No.G40022016067API)

Worldpac – WATER TEMP. SENSOR (Part No.C6020656996FAE)

Rein – Temperature Sensor (Part No.ELC0074)

Autopart International Inc – Radiator Cap (Part No.G10101946706API)

Victor Reinz – Engine Water Pump Gasket (Part No.71-14195-00)