2005 Chevrolet C5500 Kodiak Belts and Hoses

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 2005 C5500 Kodiak. Advance Auto Parts has popular C5500 Kodiak parts like Pulleys, Serpentine and V Belts, Fuel Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other C5500 Kodiak model years including 1990, 1991, 2003, 2004, 2006, 2007, 2008, 2009 and more. Select a category of 2005 Chevrolet C5500 Kodiak Belts and Hoses below and start saving instantly.

Popular 2005 Chevrolet C5500 Kodiak Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Upper Radiator Hoses

Fuel Injector Hose Kits

Lower Radiator Hoses

V-Belts

Drive Belt Idler Assemblies

Engine Coolant Hose Connector Seals

Essential Belts and Hoses for 2005 Chevrolet C5500 Kodiaks

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$81.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$79.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$27.49

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$89.99

This replacement fuel injector line is precision-engineered to match the fit and design of the original fuel injector line on specific vehicles. It comes with any vehicle-specific mounting hardware for a complete installation.

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$88.99

A common problem on the Duramax LB7 engine is contamination of the fuel fittings resulting in injector failure when serviced. Corrosion can form between the line and injector nut and fall into the injector when the line is removed or installed. Replacing the line at time of injector replacement or service is highly recommended to reduce injector failure due to contamination. CARQUEST premium fuel lines meet or exceed critical OE performance specifications for sealing and burst pressure.

Product Features:

Premium OE quality materials
Cylinder specific exact-fit geometry ensures a leak free connection
Precision machined fittings with corrosion resistant plating

from

$24.79

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$27.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some common applications
Reliable operation in harsh conditions

from

$46.99

This Litens supplied pulley is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$3.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transportation applications.
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$30.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$397.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically designed materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube; knitted synthetic fiber reinforcement, EPDM lid resistant to heat, ozone and chemical refrigerants
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$36.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$73.99

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the G.M. Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is supplied with a new integrated bolt/dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$31.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$2.79

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$64.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications.
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$20.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$62.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$41.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$25.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$141.99

Product Features:

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

from

$102.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$85.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$85.99

This Litens belt tensioner is supplied by the original equipment tensioner supplier to GM and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The aftermarket part features a cast-in lift feature and belt stretch indicator. As with the Original Equipment part, this tensioner is manufactured in Canada to the same exacting specifications as the O.E. part. The pulley is heavy duty steel as specified by the manufacturer. 2 molded locator pins for precise installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Steel Pulley
Professional Mechanics will change this tensioner in about 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$90.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). The pulley-bolt dust shield has been reengineered for the aftermarket product. The tensioner design includes a tensioner arm lift feature and well a 2 locating pins molded into the base for precise installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Designed for 6.6L Diesel – Chevy, GMC, Hummer, and Turtle Top vehicles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

Upgrade your 2005 Chevrolet C5500 Kodiak with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2005 Chevrolet C5500 Kodiak, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your C5500 Kodiak functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Belts and Hoses for the 2005 Chevrolet C5500 Kodiak, designed to meet your needs without breaking the bank. From Pulley replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2005 Chevrolet C5500 Kodiak at great prices. Our Belts and Hoses inventory for this model ranges from just $2.79 to $397.99, with an average price of $64.13. Our 55 Belts and Hoses in stock come from 7 trusted brands, so you’re sure to find the right part for your 2005 Chevrolet C5500 Kodiak without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Chevrolet C5500 Kodiak, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, FELPRO, Dayco, and more. Litens Belts and Hoses start at just $31.49 and boast an impressive 4.7 stars average rating from customers. FELPRO and Dayco also bring quality to the table, with Belts and Hoses available starting at $2.79, and at an average 4.6 stars rating. With 7,950 customer reviews and counting, our 2005 Chevrolet C5500 Kodiak Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Chevrolet C5500 Kodiak is always ready to roll. We’re committed to providing you with everything you need to keep your C5500 Kodiak in top shape, all in one place. Start shopping confidently below for your 2005 Chevrolet C5500 Kodiak!

Best-Selling Pulleys for 2005 Chevrolet C5500 Kodiaks

Enhance the driving experience in your Chevrolet with 14 quality Pulley components, starting at $14.99.

show more show less

from

$38.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.49

This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$40.99

This Litens supplied pulley is manufactured to original equipment specifications. This part is specifically designed for Chevrolet / GMC / Hummer applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$46.99

Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$31.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$34.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$34.49

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$73.99

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$27.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some common applications
Reliable operation in harsh conditions

from

$32.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$84.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Applications include G.M.. Includes a new mounting bolt as well as a new washer/dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance.
Installation instructions included.

from

$36.99

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$20.29

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

Most Popular 2005 Chevrolet C5500 Kodiak Serpentine and V Belts

Customize your Chevrolet with 26 Serpentine and V Belts products like Serpentine Belts, V-Belts, and Drive Belt Idler Assemblies, all priced under $88.99.

show more show less

from

$27.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$47.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$59.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$41.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$62.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$24.79

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$43.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$50.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$37.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$42.49

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$63.99

Patented material provides maximum performance at extreme, extended operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Troubleshooting designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$77.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty coil belts on the market
Engineered to save your fleet money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$30.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$75.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$88.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty coil belts on the market
Designed to save your fleet’s money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$45.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$79.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$49.99

Patented material provides maximum performance at extreme, extended operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$66.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$64.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all original equipment manufacturer specifications.
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$61.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Top Picks for 2005 Chevrolet C5500 Kodiak Fuel Hoses

Upgrade Chevrolet C5500 Kodiaks with top-quality Fuel Hoses parts, including 4 OEM and aftermarket selections for your 2005 model.

show more show less

from

$125.99

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$127.99

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$117.99

A common problem on the Duramax LLY engine is contamination of the fuel fittings resulting in injector failure when serviced. Corrosion can form between the line and injector nut and fall into the injector when the line is removed or installed. Replacing the line at time of injector replacement or service is highly recommended to reduce injector failure due to contamination. CARQUEST premium fuel lines meet or exceed critical OE performance specifications for sealing and burst pressure.

Product Features:

Premium OE quality materials
Cylinder specific exact-fit geometry ensures a leak free connection
Precision machined fittings with corrosion resistant plating

from

$111.99

Premium OE quality materials
Cylinder specific exact-fit geometry ensures a leak free connection
Precision machined fittings with corrosion resistant plating

In-Demand Belt Tensioners for 2005 Chevrolet C5500 Kodiaks

Select from 5 premium Belt Tensioners parts for your 2005 Chevrolet C5500 Kodiak, with prices ranging from $85.99 to $141.99.

show more show less

from

$85.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts

from

$90.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$85.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Steel Pulley
Professional Mechanics will change this tensioner in about 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$141.99

Product Features:

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

from

$102.99

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 2005 Chevrolet C5500 Kodiak Radiator Hoses

Explore our best-selling Chevrolet parts for the 2005 C5500 Kodiak among 1 OEM and aftermarket options starting from $2.79.

show more show less

from

$2.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Top-Rated Belts and Hoses Brands For Your 2005 Chevrolet C5500 Kodiak

Shop for the best-rated brands offering Belts and Hoses and other products for your 2005 Chevrolet C5500 Kodiaks. Below you’ll find some of our best rated Belts and Hoses from Litens, FELPRO, and Dayco, and more. Belts and Hoses from these brands that fit a 2005 C5500 Kodiak start at just $2.79 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2005 Chevrolet C5500 Kodiak Belts and Hoses

When it comes to maintaining or upgrading your 2005 Chevrolet C5500 Kodiak, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2005 Chevrolet C5500 Kodiak. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.82. Plus, with over 7 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $31.49

(5)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“Works perfectly! The old one was squeaking and it was time to be replaced.”

from $40.99

(1)

Idler Pulley: Direct Fit, Steel, 76mm Diameter

“Great”

from $46.99

(1)

Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter

“Very good quality. Smooth and quite.”

Popular FELPRO 2005 Chevrolet C5500 Kodiak Belts and Hoses

FELPRO auto parts is one of the highest quality Belts and Hose brands in the market. Any 2005 Chevrolet C5500 Kodiak owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2005 C5500 Kodiak, Advance Auto Parts carries a full inventory of 1 FELPRO Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FELPRO Belts and Hoses range up to $2.79, plus, with more than 1 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $2.79

(1)

Multi-Purpose O-Ring

“This is the big o-ring that connects the top, rear side of the thermostat housing with the metal portion of the upper radiator pipe. This is not the s”

FAQs for 2005 Chevrolet C5500 Kodiak Belts and Hoses

Which Belts and Hoses are best-sellers for 2005 Chevrolet C5500 Kodiaks?

Out of 55 Belts and Hoses that fit 2005 Chevrolet C5500 Kodiaks, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $34.99
Idler Pulley, Dayco (5160000) – $32.99
Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (5064902) – $27.49

What’s the price range for 2005 Chevrolet C5500 Kodiak Belts and Hoses?

Belts and Hose prices for the 2005 Chevrolet C5500 Kodiak start at $2.79 and go up to $397.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2005 Chevrolet C5500 Kodiak?

The average price for Belts and Hoses for the 2005 Chevrolet C5500 Kodiak is $64.13. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet C5500 Kodiak model years?

Yes, we currently carry Belts and Hoses for 7 model years of Chevrolet C5500 Kodiaks between 1990 and 2009. Belts and Hoses are bought most frequently for the following model years: 2009, 2008, 2007, 2006, 2004, 2003, 1991, and 1990.

What are the cheapest Belts and Hoses for my 2005 Chevrolet C5500 Kodiak?

The cheapest 2005 Chevrolet C5500 Kodiak Belts and Hoses we carry in stock are:

Multi-Purpose O-Ring (20688830) – $2.79
Idler Pulley (Pulley only) (10041701) – $14.99
Idler/Tensioner Pulley: Specific Fit, Steel, 75 mm Diameter (12150078) – $20.29
Idler Pulley, Dayco (15130060) – $24.79
Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (5064902) – $27.49

What are the top-rated Belts and Hoses that fit the 2005 Chevrolet C5500 Kodiak?

Out of 7,950 reviews by customers, our 2005 Chevrolet C5500 Kodiak Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2005 Chevrolet C5500 Kodiak and their top-rated products:

Belt Tensioners
- Automatic Belt Tensioner (15130034) – $85.99
Radiator Hoses
- Automatic Belt Tensioner (15130034) – $85.99
Serpentine and V Belts
- Automatic Belt Tensioner (15130034) – $85.99

What types of Belts and Hoses do you sell for my 2005 Chevrolet C5500 Kodiak?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2005 Chevrolet C5500 Kodiak:

Can I get help with 2005 Chevrolet C5500 Kodiak Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet C5500 Kodiak Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet C5500 Kodiak Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Chevrolet C5500 Kodiak Belts and Hoses

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Engine Oil Cooler Line (Part No.625-507)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061360HD)

Dayco – Bottom Cog V-Belt; 52.5 Inch Long, Exact Fit Premium Quality (Part No.17525)

Dorman – Fuel Injector Feed Pipe (Part No.904-127)

Carquest Premium – Fuel Injector High Pressure Line (Part No.AL006)

Dayco – Idler Pulley, Dayco (Part No.89051)

Dayco – Idler Pulley, Dayco (Part No.89015)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38008)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900448A)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.30" Long, 1.75" Diameter (Part No.E72155)

Gates – Premium Modular Coolant Hose (Part No.22771)

Dorman – Idler Pulley (Pulley Only) (Part No.419-663)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900401A)

Dayco – Idler Pulley, Dayco (Part No.89006)

Felpro – Multi-Purpose O-Ring (Part No.35759)

Gates – Micro-V Serpentine Drive Belt (Part No.K061140)

Driveworks – Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count (Part No.670K6)

Dayco – Poly Rib Belt Serpentine Belt; 118.5 Long, 6 Rib Count (Part No.5061185)

Dayco – Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (Part No.5060905)

Driveworks – Poly Rib Belt Serpentine Belt; 114.25 Long, 6 Rib Count (Part No.1143K6)

Gates – DriveAlign½ Automatic Belt Drive Tensioner (Part No.38258)

Dorman – Automatic Belt Tensioner (Part No.419-358)

Dayco – Automatic Belt Tensioner (Part No.89259)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999122A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999041A)

Dayco – Idler Pulley, Dayco (Part No.89165)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900031A)

Litens – Idler Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900366A)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900448A)

Dayco – Idler Pulley, Dayco (Part No.89006)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900022A)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900401A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38008)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38006)

Litens – Idler Pulley: Direct Fit, Steel, 85mm Diameter (Part No.900249A)

Dorman – Idler Pulley (Pulley Only) (Part No.419-663)

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 75 mm Diameter (Part No.419-629)

Driveworks – Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (Part No.905K6)

Dayco – Poly Rib Belt Serpentine Belt; 119.5 Long, 6 Rib Count (Part No.5061195)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061195HD)

Dayco – Idler Pulley, Dayco (Part No.89015)

Dayco – Poly Rib Belt Serpentine Belt; 90.55 Long, 6 Rib Count (Part No.5060905)

Dayco – Poly Rib Belt Serpentine Belt; 99.5 Long, 6 Rib Count (Part No.5060995)

Dayco – Poly Rib Belt Serpentine Belt; 118.5 Long, 6 Rib Count (Part No.5061185)

Dayco – Idler Pulley, Dayco (Part No.89051)

Driveworks – V-Ribbed Belt, Driveworks (Part No.995K6)

Dayco – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.5061055)

Dayco – Poly Rib Belt Serpentine Belt; 136.02 Long, 6 Rib Count (Part No.5061360)

Driveworks – Poly Rib Belt Serpentine Belt; 136.02 Long, 6 Rib Count (Part No.1360K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K061058)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061058HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061187HD)

Driveworks – Poly Rib Belt Serpentine Belt; 105.51 Long, 6 Rib Count (Part No.1055K6)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061140HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060988HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060994HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K061360HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060905HD)

Dayco – Poly Rib Belt Serpentine Belt; 98.82 Long, 6 Rib Count (Part No.5060988)

Gates – Micro-V Serpentine Drive Belt (Part No.K061140)

Gates – Micro-V Serpentine Drive Belt (Part No.K061360)

Dorman – Diesel Return Line (Part No.904-122)

Dorman – Diesel Return Line (Part No.904-123)

Carquest Premium – Fuel Injector High Pressure Line (Part No.AL019)

Carquest Premium – Fuel Injector High Pressure Line (Part No.AL017)

Dayco – Automatic Belt Tensioner (Part No.89259)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999041A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999122A)

Gates – DriveAlign½ Automatic Belt Drive Tensioner (Part No.38258)

Dorman – Automatic Belt Tensioner (Part No.419-358)

Felpro – Multi-Purpose O-Ring (Part No.35759)