2005 Chevrolet C4500 Kodiak Drivetrains
More 2005 Chevrolet C4500 Kodiak Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 Chevrolet C4500 Kodiak, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 Chevrolet C4500 Kodiak Drivetrains
USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)
from
$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)
from
$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.
Product Features:
See More
Product Features:
- Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Differential (Part No.26046)
from
$994.99
Differential
Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)
from
$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)
from
$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 80
- 9/16″ x 18 thread
Yukon Gear – Set Up Bearing (Part No.56040)
from
$264.99
Set-up carrier bearing kti (2 bearings, no races) for Dana 70 HD and Dana 80. 469. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 80
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana S135 With 36 Spline Axles (Part No.16136)
from
$872.99
Yukon replacement standard open spider gear kit for Dana S135 with 36 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer S135 open differential
- Includes two side gears, two four gears, cross pin shaft and spider gear thrust washers.
MOOG Driveline Products – Double Cardan CV Ball Kit (Part No.617)
from
$59.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Designed for ease of installation
- Includes necessary hardware
- Designed for superior performance
- Designed for ultimate strength
- Increased tolerance for a performance fit
- Meets deflection parameters
Pro-King – Axle Seal (Part No.716F076A)
from
$38.99
Axle Seal
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Dorman – Vacuum Actuator, Front Axle and Auxiliary Heater (Part No.600-104)
from
$48.99
This 4WD actuator valve directly replaces the original equipment valve on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD actuator valve matches the fit and function of the stock valve on specific vehicle applications
- Effective fix – addresses four-wheel drive failures caused by failed original valve
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
Spicer – Differential Carrier Gear Kit (Part No.707063X)
from
$315.99
Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non genuine parts simply cannot deliver.
See More
Yukon Gear – Replacement Yoke For Dana 80 With A 1480 U/Joint Size (Part No.41035)
from
$235.99
Yukon replacement yoke for Dana 80 with a 1480 U/joint size. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1480 u-joint size
- 4.188″ snap ring span
- 1.375″ cap diameter
- Outside snap ring design
- Strap style
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)
from
$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 70 and 80
Motive Gear – Differential Gear Install Kit (Part No.D80IK)
Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)
from
$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler Dana Spicer 80 with 37 spline axles
- 4.10 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)
from
$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 80 Trac Loc positraction
Yukon Gear – Steel Cover For Dana 80 (Part No.32323)
Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)
from
$69.99
Chrome replacement cover for Dana 80.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- Chrome
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 2005 Chevrolet C4500 Kodiak Drivetrains Categories
2005 Chevrolet C4500 Kodiak Drivetrains
You count on your 2005 Chevrolet C4500 Kodiak to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 139 Drivetrains ranging in price from $3.49 to $1,145.00, you’re sure to find everything you need for your 2005 Chevrolet C4500 Kodiak.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Valvoline, Moog, and Spicer. 2005 Chevrolet C4500 Kodiak Drivetrains start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,619 extensive product reviews on 2005 Chevrolet C4500 Kodiak Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 4.0 stars and Greaseable Premium Universal Joint with 4.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Chevrolet C4500 Kodiak below to get started!
Top-Rated Drivetrains Brands For Your 2005 Chevrolet C4500 Kodiak
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Chevrolet C4500 Kodiak running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Spicer, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Universal Joints. All are waiting to get your 2005 Chevrolet C4500 Kodiak back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2005 Chevrolet C4500 Kodiak, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2005 Chevrolet C4500 Kodiak Drivetrains
What are the most purchased Drivetrains for the 2005 Chevrolet C4500 Kodiak?
Out of 139 Drivetrains for the 2005 Chevrolet C4500 Kodiak, the most popular in our inventory are:
What are the top-rated 2005 Chevrolet C4500 Kodiak Drivetrains?
Top-rated Drivetrains for your 2005 Chevrolet C4500 Kodiak based on customer reviews/ratings are:
from
$41.99
(12)
Non-Greaseable Super Strength Universal Joint
“Fits and works like it’s supposed to.”
