2005 Cadillac Escalade ESV Air Flow Sensors

ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Sends signals to the engine controls for optimal engine performance
• Designed to adjust engine performance to various altitudes
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Manifold Absolute Pressure Sensor

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

ACDelco GM Original Equipment Multi Purpose Temperature Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: hvac. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.
• NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Repairs the outside temperature display function caused by failed ambient temp sensor
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
• NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.