2005 Cadillac Escalade Engine Parts

Below you will find various in-demand Cadillac Engine Parts, components and accessories for your 2005 Escalade. Advance Auto Parts has popular Escalade parts like Valve Cover and Cylinder Heads, Engine Mounts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Escalade model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2005 Cadillac Escalade Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2005 Cadillac Escalade Engine Parts Categories

Engine Lifter Valley Cover Gasket Sets

Valve Covers

Engine Oil Pump O-Rings

Camshaft Gaskets

Engine Valve Lifters

Engine Control Module Connectors

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Cooler Gasket Sets

Gasket Kit Sets

Oil Pans

Valve Cover Grommets

Engine Oil Cooler Accessories

Engine Oil Dip Stick Tubes

Cylinder Head Gaskets

Oil Cooler Line Connectors

Engine Oil Dipsticks

Engine Oil Pump Pickup Tube and Screens

Valley Pan Gaskets

O-Rings

Main Bearing Repair Sleeves

Engine Coolant Thermostat Kits

Engine Valve Stem Seals

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Main Bearings

Water Connection Gaskets

Standard Piston Rings

Lower Gasket Sets

Engine Oil Level Sensor Cover Kits

Timing Chains

Engine Oil Galley Plugs

Camshaft Seals

Standard Individual Rod Bearings

Engine Valves

Engine Oil Filler Cap Seals

Oil Pump Screens

Timing Crank Gears

Camshaft Thrust Plate and Bearings

Camshaft Followers

Rocker Arm Bolts

Engine Valve Locks

Engine Rocker Arm Pivots

Crankshaft Sealing Flange Gaskets

Oversized Piston Rings

Oversized Rod Bearing Set

Oversized Individual Rod Bearing

Valley Pan Covers

Engine Oil Cooler (Not O.E.)

Engine Oil Pump Pickup Tube O-Rings

Engine Oil Feed Line

Camshaft Lubes

Engine Oil Pump Primers

Engine Camshaft Bushings

Engine Camshaft Retainer Plates

Engine Oil Strainer Gasket Sets

Engine Oil Pump Pickup Tube Bracket

Valve Train Set Up Spring Set

Engine Push Rod Guide Plate

Essential Engine Parts for 2005 Cadillac Escalades

Dorman - Help Engine Oil Filler Cap, 42315

from

$15.99

This engine oil filter cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

from

$10.49

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Top Street Performance GM LS1, LS6 Neoprene Valley Cover Gasket, 81047

from

$36.99

Whether refreshing your LSX engine or finishing a swap, TSP valley cover gasket is a sure way to guarantee a secure seal every time. Composed of steel, with a neoprene seal, it is designed to fit with valley covers, as well as TSP finned covers.

Dorman Harmonic Balancer Assembly, 594-121

from

$81.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Sealed Power Engine Connecting Rod Bearing, 2555A 10

from

$6.29

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Dorman Oil Fill Tube with Gasket, 917-420

from

$32.99

This engine oil filler tube is designed to match the performance of an original equipment tube on specified vehicle makes, years and models. When a factory filler tube has failed from fatigue, this replacement is engineered to help provide a sturdy and reliable entry point to help ensure proper lubrication.

Cloyes Performance Engine Oil Pump Drive Gear, 9-228

from

$32.99

Replacement Oil Pump Drive Nose / Gear for Cloyes High Performance LS Timing Chain Sets.

Felpro Engine Valve Stem Oil Seal Set, SS 72861

from

$33.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Felpro PermaTorque Engine Cylinder Head Gasket, 26191 PT

from

$81.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Dorman Camshaft Phaser - Variable Timing Camshaft Gear, 918-186

from

$178.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Felpro Engine Camshaft Position Sensor Seal, 72760

from

$7.99

Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for '87+ SBC, LT/LS and V6, 875-1

from

$44.99

Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6, 875-1.

Felpro Engine Valve Cover Grommet Set, ES 72233

from

$24.99

"Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16"" Pushrod And 8Mm Stud, 4854-8"

from

$33.99

“Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16″” Pushrod And 8Mm Stud, 4854-8. ”

Melling Select Performance Valve Train Set Up Spring, VTSS100

from

$11.79

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

Autotecnica Oil Pump Pickup Tube, GM1417157

from

$21.49

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive €œGenuine€ components.

"Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-178"

from

$731.99

Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers are available in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins).

Felpro Engine Cylinder Head Bolt Set, ES 72390

from

$40.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Melling Select Performance High Performance Replacement Bolt On Oil Pump Screen, 12558

from

$38.99

A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.

Cloyes Gear Engine Timing Crankshaft Sprocket, S1111

from

$80.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

Melling Stock Replacement Oil Pump, M295-324S

from

$195.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Carquest Engine Crankshaft Position Sensor, CSA1928

from

$41.99

Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Sealed Power Engine Connecting Rod Bearing, 2555A 30

from

$7.59

Sealed Power Engine Piston Ring Set, E-921K 60

from

$163.99

Sealed Power Engine Gasket Set, 260-1955

from

$508.99

from

$36.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Victor Reinz Engine Oil Cooler Gasket, 71-13510-00

from

$15.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Competition Cams XFI XE-R 232/234 Hydraulic Roller Cam, 54-446-11

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Upgrade your 2005 Cadillac Escalade with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2005 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Engine Parts are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 245 Engine Parts for the 2005 Cadillac Escalade, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2005 Cadillac Escalade at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $956.99, with an average price of $172.33. Our 245 Engine Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 2005 Cadillac Escalade without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Cadillac Escalade, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Sealed Power, Dorman, and more. Felpro Engine Parts start at just $6.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $6.29, and at an average 4.4 stars rating. With 1,079 customer reviews and counting, our 2005 Cadillac Escalade Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place. Start shopping confidently below for your 2005 Cadillac Escalade!

Best-Selling Valve Cover and Cylinder Heads for 2005 Cadillac Escalades

Enhance the driving experience in your Cadillac with 57 quality Valve Cover and Cylinder Head components, starting at $0.65.

show more show less

Felpro PermaTorque Engine Cylinder Head Gasket, 26192 PT

from

$94.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

from

$81.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26191 PT-1

from

$221.99

Felpro Engine Cylinder Head Bolt Set, ES 72220

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Dorman Valve Covers: with Gasket, Direct Replacement, Aluminum, 264-965

from

$199.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Sealed Power Engine Valve Lifter, HT-2148

from

$14.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$6.49

Sealed Power Engine Valve Lifter, HT-2148A

from

$28.49

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

GM Genuine Parts Gen III/IV Lifter Guide, 12595365

from

$15.79

GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

from

$24.99

Sealed Power Engine Valve Spring Retainer Keeper, VK-291

from

$0.65

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26192 PT-2

from

$317.99

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Polished, 241-181

from

$956.99

“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”

"Holley 2-Piece ""Chevrolet"" Script Valve Cover - Gen III/IV LS - Polished, 241-176"

from

$868.99

“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Natural, 241-180

from

$843.99

Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers will be offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins). Polished and black versions coming soon.

"Holley 2-Piece ""Chevrolet"" Script Valve Cover - Gen III/IV LS - Natural, 241-175"

from

$762.99

“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Satin Black Machined, 241-182

from

$762.99

Holley 2-Piece Cast Aluminum Valve Covers, Satin Black Finish, 241-172

from

$749.99

“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features our Vintage Series style fins with a script Holley logo that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”

from

$731.99

"Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-179"

from

$731.99

“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Gloss Red Machined, 241-184

from

$709.99

Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers will be offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins). Polished and black versions coming soon.

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Factory Orange Machined, 241-183

from

$672.99

Holley LS Valve Covers - Polished, 241-90

from

$562.99

“Holley’s cast aluminum valve covers for GM LS engines provide a fresh, refined look without the need to relocate the coils. There’s no question the factory “”coil on cover”” design gives the LS that signature high-tech look, but the factory brackets and coil location leave room for improvement. Clean up that signature look with Holley’s LS Valve Covers! They incorporate a radiused shape, angled coil mounting, and a billet fill cap. Plus, the coils mount directly to the cover with no need for a bracket in-between. They fit most popular LS series engines and come in Black Krinkle, Satin, Natural Cast, and Polished. Or, paint to match your vehicle’s theme!”

from

$545.99

Based on our existing tall LS valve covers, the GM Licensed Tall LS valve covers eliminate the factory coil-on-cover look and instead feature prominent, cast-in graphics that are sure to dress up your engine bay and represent your loyalty to your favorite OEM brand.

Most Popular 2005 Cadillac Escalade Engine Mounts

Customize your Cadillac with 3 Engine Mounts products like Engine Mounts, all priced under $279.99.

show more show less

Anchor Engine Mount Front Right, Front Left, 2909

from

$53.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CADI 02-06; CHEV 99-19; GMC 99-13; HUMMER 03-09;. Please verify your application.

from

$171.99

GM Genuine Parts Engine Mount are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

GM Genuine Parts Pink Engine Mount, 15226255

from

$279.99

Top Picks for 2005 Cadillac Escalade Engine Gaskets and Seals

Upgrade Cadillac Escalades with top-quality Engine Gaskets and Seals parts, including 23 OEM and aftermarket selections for your 2005 model.

show more show less

Felpro Engine Oil Pan Gasket Set - PermaDry molded rubber, OS 30693 R

from

$74.99

Felpro Engine Timing Cover Gasket Set, TCS 45993

from

$55.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

from

$84.99

This direct replacement rear main seal cover kit matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Dorman - Help Coolant Bypass Seals, 56390

from

$11.49

This engine coolant water bypass gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

from

$29.99

Felpro Engine Coolant Crossover Pipe Mounting Set, ES 73027

from

$22.99

Felpro Engine Valve Cover Gasket Set, VS 50504 R-1

from

$40.99

Felpro Engine Valve Cover Gasket Set, VS 50504 R

from

$29.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Felpro Engine Lifter Valley Cover Gasket Set, MS 92465

from

$47.99

from

$13.99

from

$7.49

Felpro Engine Valve Stem Oil Seal Set, SS 71039

from

$40.99

GM Genuine Parts Oil Pan Gasket, 12612350

from

$74.99

GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Felpro Engine Oil Filler Cap Seal, 73193

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Dorman - Help Oil Cooler Line Gasket, 66218

from

$12.49

This oil cooler gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

GM Genuine Parts Oil Pan Cover Gasket: Nitrile Coated SS, 12611384

from

$9.99

GM Genuine Parts Engine Oil Pan Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Felpro Engine Conversion Gasket Set, CS 9284

from

$219.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Victor Reinz Engine Oil Pan Gasket Set for GM 5.3L, 5.7L, 6.0L, and 6.2L V8,Engine Oil Pan Gasket Set, 10-10223-01

from

$80.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Crankshaft Oil Seal Housing Gasket, 12639249

from

$51.99

GM Genuine Parts Engine Crankshaft Seal Retainer Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

from

$36.99

from

$29.99

GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Victor Reinz Engine Valve Cover Gasket Set, 15-10663-01

from

$21.79

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Melling Engine Oil Strainer Gasket Set, M29517

from

$3.99

Made In USA. Installing an oil pump screen can often cause damage to the protective gaskets and O Rings if the screen assembly is not properly installed. In the event that the original seals are damaged or accidently discarded Melling offers a replacement gasket set for oil pump screen installations covering the LS oil pumps. Each package conveniently contains both replacement O Rings needed to complete the oil pump screen installation. These gasket sets can be used for the M295, M295HV, M355, M365, 10295, 10296 and 10355 oil pumps.

In-Demand Camshafts for 2005 Cadillac Escalades

Select from 17 premium Camshafts parts for your 2005 Cadillac Escalade, with prices ranging from $5.89 to $541.99.

show more show less

MAHLE Original Engine Camshaft Gasket, B31822

from

$24.99

MAHLEÃ‚® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

MAHLE Original Engine Camshaft Gasket, B32270

from

$31.99

MAHLEÃ‚® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

from

$64.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Sealed Power Engine Camshaft Bearing Set, 1888M

from

$39.99

NTK Engine Camshaft Position Sensor, EC0099

from

$65.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Felpro Engine Camshaft Thrust Plate, ES 73115

from

$43.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Cloyes Performance Engine Camshaft Thrust Button, 9-232

from

$21.49

Replacement Captured Needle Thrust Bearing for LS Applications; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Competition Cams XFI RPM 212/218 Hydraulic Roller Cam, 54-412-11

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Competition Cams XFI RPM 216/220 Hydraulic Roller Cam, 54-414-11

from

$541.99

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Victor Reinz Engine Camshaft Seal, 71-18369-00

from

$48.49

from

$45.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

from

$44.99

Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6, 875-1.

Autotecnica Camshaft Position Sensor, GM1415428

from

$39.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive €œGenuine€ components.

Victor Reinz Engine Camshaft Retainer Plate, 71-17533-00

from

$29.99

Cloyes Performance Engine Camshaft Bushing, P9005

from

$24.99

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Melling Stock Replacement Engine Assembly Lubricant, 4 oz., M-10012

from

$5.89

Made In USA. 4 oz. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

Most Sold 2005 Cadillac Escalade Engine Timing Parts

Explore our best-selling Cadillac parts for the 2005 Escalade among 35 OEM and aftermarket options starting from $28.99.

show more show less

Cloyes Gear Engine Timing Components, Camshaft Timing Kit, Crankshaft Timing Kit, Timing Set with Sprockets, Timing Drive Assembly, C-3220

from

$55.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing sets are engineered for precision, durability, and optimal engine performance. Sets includes crankshaft sprocket, camshaft sprocket and chain. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Cloyes Gear Engine Timing Components, Camshaft Timing Kit, Crankshaft Timing Kit, Timing Set with Sprockets, Timing Drive Assembly, C-3210

from

$98.99

from

$118.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

from

$45.49

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit €” delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Cloyes Performance High Performance Timing Set, 9-3658TX9

from

$175.99

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

from

$75.99

ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Cloyes Performance High Performance Timing Chain, 9-304

from

$45.99

“High Performance 3/8″” Pitch Single Roller Replacement TRUE Roller Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.”

Cloyes Performance High Performance Timing Set, 9-3158A

from

$234.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

from

$43.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Cloyes Gear Engine Timing Crankshaft Sprocket, S827

from

$28.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Cloyes Performance High Performance Timing Set, 9-3158AZR

from

$428.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “”Z”” Chain TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3658TX3Z

from

$384.99

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3158AZ

from

$382.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “”Z”” Chain TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3158AZ-5

from

$372.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “”Z”” Chain TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3658TX9ZR

from

$369.99

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3658TX9Z

from

$359.99

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3658TX3ZR

from

$339.99

Cloyes Performance High Performance Timing Set, 9-3159A

from

$288.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Double Roller 0.250″” Roller Diameter Chain for Reduced Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3159A-5

from

$268.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Double Roller 0.250″” Roller Diameter Chain for Reduced Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3159AR

from

$258.99

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Double Roller 0.250″” Roller Diameter Chain for Reduced Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Cloyes Performance High Performance Timing Set, 9-3659X3-10

from

$257.99

Cloyes Performance High Performance Timing Chain, 9-302

from

$241.99

Cloyes Performance High Performance Timing Set, 9-3659X3

from

$236.99

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. 0.005″” and 0.010″” Reduced Length Chains Available, to Order Add -5 or -10 to the End of this Part Number.”

Cloyes Performance High Performance Timing Set, 9-3659X3R

from

$229.99

Top-Rated Engine Parts Brands For Your 2005 Cadillac Escalade

Shop for the best-rated brands offering Engine Parts and other products for your 2005 Cadillac Escalades. Below you’ll find some of our best rated Engine Parts from Felpro, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 2005 Escalade start at just $6.29 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2005 Cadillac Escalade Engine Parts

When it comes to maintaining or upgrading your 2005 Cadillac Escalade, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2005 Cadillac Escalade. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $45.99. Plus, with over 157 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $55.99

(42)

Felpro Engine Timing Cover Gasket Set, TCS 45993

“A+”

from $74.99

(74)

Felpro Engine Oil Pan Gasket Set – PermaDry molded rubber, OS 30693 R

“Fit great, good quality”

from $6.99

(41)

Felpro Multi-Purpose O-Ring, 72401

“Good”

Popular Sealed Power 2005 Cadillac Escalade Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2005 Cadillac Escalade owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2005 Escalade, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Sealed Power Engine Parts range from $6.29 to $8.89, plus, with more than 4 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Sealed Power Engine Connecting Rod Bearing, 2555A 20

from $6.29

(2)

Sealed Power Engine Connecting Rod Bearing, 2555A 20

“I needed these parts right away & Advance Auto had them in stock. They were exactly what I needed, they worked great.”

Sealed Power Engine Connecting Rod Bearing, 2555CP

from $8.89

(1)

Sealed Power Engine Connecting Rod Bearing, 2555CP

“great”

Sealed Power Engine Connecting Rod Bearing, 2555A 1

from $7.59

(1)

Sealed Power Engine Connecting Rod Bearing, 2555A 1

“great price and fit good”

FAQs for 2005 Cadillac Escalade Engine Parts

Which Engine Parts are best-sellers for 2005 Cadillac Escalades?

Out of 245 Engine Parts that fit 2005 Cadillac Escalades, the following parts are the top sellers:

Sealed Power Engine Valve Lifter, HT-2148 (5681081) – $14.49
Felpro Engine Crankshaft Seal Kit, BS 40640 (15780459) – $47.99
Dorman Main Seal Cover Kit, 635-518 (10286660) – $84.99

What’s the price range for 2005 Cadillac Escalade Engine Parts?

Engine Part prices for the 2005 Cadillac Escalade start at $0.65 and go up to $956.99 for the most premium parts.

What’s the average price of a Engine Part for a 2005 Cadillac Escalade?

The average price for Engine Parts for the 2005 Cadillac Escalade is $172.33. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Cadillac Escalade model years?

Yes, we currently carry Engine Parts for 25 model years of Cadillac Escalades between 1999 and 2026. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 2005 Cadillac Escalade?

The cheapest 2005 Cadillac Escalade Engine Parts we carry in stock are:

Sealed Power Engine Valve Spring Retainer Keeper, VK-291 (15680110) – $0.65
Felpro Engine Oil Dipstick Tube O-Ring, 73889 (50251306) – $0.99
Felpro Multi-Purpose O-Ring, 35633 (15780472) – $3.29
Melling Engine Oil Strainer Gasket Set, M29517 (12222159) – $3.99
Sealed Power Engine Connecting Rod Bearing, 2555A 2 (20683077) – $4.99

What are the top-rated Engine Parts that fit the 2005 Cadillac Escalade?

Out of 1,079 reviews by customers, our 2005 Cadillac Escalade Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2005 Cadillac Escalade and their top-rated products:

Engine Gaskets and Seals
- Dorman – Help Coolant Bypass Seals, 56390 (17191292) – $11.49
- National Engine Crankshaft Seal, 100085 (20440842) – $29.99
- Dorman Main Seal Cover Kit, 635-518 (10286660) – $84.99
Valve Cover and Cylinder Heads
- Dorman – Help Coolant Bypass Seals, 56390 (17191292) – $11.49
- National Engine Crankshaft Seal, 100085 (20440842) – $29.99
- Dorman Main Seal Cover Kit, 635-518 (10286660) – $84.99

What types of Engine Parts do you sell for my 2005 Cadillac Escalade?

As of 8/2/26, these are some of the most in-demand types of Engine Parts for a 2005 Cadillac Escalade:

Can I get help with 2005 Cadillac Escalade Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Engine Parts and more.

What is your return policy for Cadillac Escalade Engine Parts?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Cadillac Escalade Engine Parts

Dorman – Help – Dorman – Help Engine Oil Filler Cap, 42315 (Part No.42315)

Felpro – Felpro Shaft Repair Sleeve, 16228 (Part No.16228)

Top Street Performance – Top Street Performance GM LS1, LS6 Neoprene Valley Cover Gasket, 81047 (Part No.81047)

Dorman – Dorman Harmonic Balancer Assembly, 594-121 (Part No.594-121)

Sealed Power – Sealed Power Engine Connecting Rod Bearing, 2555A 10 (Part No.2555A 10)

Dorman – Dorman Oil Fill Tube with Gasket, 917-420 (Part No.917-420)

Cloyes Performance – Cloyes Performance Engine Oil Pump Drive Gear, 9-228 (Part No.9-228)

Felpro – Felpro Engine Valve Stem Oil Seal Set, SS 72861 (Part No.SS 72861)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 26191 PT (Part No.26191 PT)

Dorman – Dorman Camshaft Phaser – Variable Timing Camshaft Gear, 918-186 (Part No.918-186)

Felpro – Felpro Engine Camshaft Position Sensor Seal, 72760 (Part No.72760)

Competition Cams – Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6, 875-1 (Part No.875-1)

Felpro – Felpro Engine Valve Cover Grommet Set, ES 72233 (Part No.ES 72233)

Competition Cams – "Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16"" Pushrod And 8Mm Stud, 4854-8" (Part No.4854-8)

Melling Select Performance – Melling Select Performance Valve Train Set Up Spring, VTSS100 (Part No.VTSS100)

Autotecnica – Autotecnica Oil Pump Pickup Tube, GM1417157 (Part No.GM1417157)

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-178" (Part No.241-178)

Felpro – Felpro Engine Cylinder Head Bolt Set, ES 72390 (Part No.ES 72390)

Melling Select Performance – Melling Select Performance High Performance Replacement Bolt On Oil Pump Screen, 12558 (Part No.12558)

Cloyes Gear – Cloyes Gear Engine Timing Crankshaft Sprocket, S1111 (Part No.S1111)

Melling – Melling Stock Replacement Oil Pump, M295-324S (Part No.M295-324S)

Carquest Premium – Carquest Engine Crankshaft Position Sensor, CSA1928 (Part No.CSA1928)

Sealed Power – Sealed Power Engine Connecting Rod Bearing, 2555A 30 (Part No.2555A 30)

Sealed Power – Sealed Power Engine Piston Ring Set, E-921K 60 (Part No.E-921K 60)

Sealed Power – Sealed Power Engine Gasket Set, 260-1955 (Part No.260-1955)

National – National Engine Crankshaft Seal, 100470 (Part No.100470)

Victor Reinz – Victor Reinz Engine Oil Cooler Gasket, 71-13510-00 (Part No.71-13510-00)

Competition Cams – Competition Cams XFI XE-R 232/234 Hydraulic Roller Cam, 54-446-11 (Part No.54-446-11)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 26192 PT (Part No.26192 PT)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 26191 PT (Part No.26191 PT)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26191 PT-1 (Part No.HS 26191 PT-1)

Felpro – Felpro Engine Cylinder Head Bolt Set, ES 72220 (Part No.ES 72220)

Dorman – Dorman Valve Covers: with Gasket, Direct Replacement, Aluminum, 264-965 (Part No.264-965)

Sealed Power – Sealed Power Engine Valve Lifter, HT-2148 (Part No.HT-2148)

Sealed Power – Sealed Power Engine Push Rod, RP-3349 (Part No.RP-3349)

Sealed Power – Sealed Power Engine Valve Lifter, HT-2148A (Part No.HT-2148A)

GM Genuine Parts – GM Genuine Parts Gen III/IV Lifter Guide, 12595365 (Part No.12595365)

Felpro – Felpro Engine Valve Cover Grommet Set, ES 72233 (Part No.ES 72233)

Sealed Power – Sealed Power Engine Valve Spring Retainer Keeper, VK-291 (Part No.VK-291)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26192 PT-2 (Part No.HS 26192 PT-2)

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Polished, 241-181 (Part No.241-181)

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover – Gen III/IV LS – Polished, 241-176" (Part No.241-176)

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Natural, 241-180 (Part No.241-180)

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover – Gen III/IV LS – Natural, 241-175" (Part No.241-175)

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Satin Black Machined, 241-182 (Part No.241-182)

Holley – Holley 2-Piece Cast Aluminum Valve Covers, Satin Black Finish, 241-172 (Part No.241-172)

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-178" (Part No.241-178)

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-179" (Part No.241-179)

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Gloss Red Machined, 241-184 (Part No.241-184)

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Factory Orange Machined, 241-183 (Part No.241-183)

Holley – Holley LS Valve Covers – Polished, 241-90 (Part No.241-90)

Holley – Holley Tall LS Valve Cover with Bowtie/Chevrolet Logo – Gloss Red Machined Finish, 241-404 (Part No.241-404)

Anchor – Anchor Engine Mount Front Right, Front Left, 2909 (Part No.2909)

GM Genuine Parts – GM Genuine Parts Engine Mount, 25828247 (Part No.25828247)

GM Genuine Parts – GM Genuine Parts Pink Engine Mount, 15226255 (Part No.15226255)

Felpro – Felpro Engine Oil Pan Gasket Set – PermaDry molded rubber, OS 30693 R (Part No.OS 30693 R)

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45993 (Part No.TCS 45993)

Dorman – Dorman Main Seal Cover Kit, 635-518 (Part No.635-518)

Dorman – Help – Dorman – Help Coolant Bypass Seals, 56390 (Part No.56390)

National – National Engine Crankshaft Seal, 100085 (Part No.100085)

Felpro – Felpro Engine Coolant Crossover Pipe Mounting Set, ES 73027 (Part No.ES 73027)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 50504 R-1 (Part No.VS 50504 R-1)

Felpro – Felpro Engine Valve Cover Gasket Set, VS 50504 R (Part No.VS 50504 R)

Felpro – Felpro Engine Lifter Valley Cover Gasket Set, MS 92465 (Part No.MS 92465)

Felpro – Felpro Engine Oil Cooler Gasket, 72462 (Part No.72462)

Felpro – Felpro Engine Oil Cooler Gasket, 72435 (Part No.72435)

Felpro – Felpro Engine Valve Stem Oil Seal Set, SS 71039 (Part No.SS 71039)

GM Genuine Parts – GM Genuine Parts Oil Pan Gasket, 12612350 (Part No.12612350)

Felpro – Felpro Engine Oil Filler Cap Seal, 73193 (Part No.73193)

Dorman – Help – Dorman – Help Oil Cooler Line Gasket, 66218 (Part No.66218)

GM Genuine Parts – GM Genuine Parts Oil Pan Cover Gasket: Nitrile Coated SS, 12611384 (Part No.12611384)

Felpro – Felpro Engine Conversion Gasket Set, CS 9284 (Part No.CS 9284)

Victor Reinz – Victor Reinz Engine Oil Pan Gasket Set for GM 5.3L, 5.7L, 6.0L, and 6.2L V8,Engine Oil Pan Gasket Set, 10-10223-01 (Part No.10-10223-01)

Top Street Performance – Top Street Performance GM LS1, LS6 Neoprene Valley Cover Gasket, 81047 (Part No.81047)

Victor Reinz – Victor Reinz Engine Valve Cover Gasket Set, 15-10663-01 (Part No.15-10663-01)

Melling – Melling Engine Oil Strainer Gasket Set, M29517 (Part No.M29517)

MAHLE Original – MAHLE Original Engine Camshaft Gasket, B31822 (Part No.B31822)

MAHLE Original – MAHLE Original Engine Camshaft Gasket, B32270 (Part No.B32270)

Carquest Premium – Carquest Camshaft Sensor, CSC1064 (Part No.CSC1064)