2005 Cadillac CTS Air Intakes

Essential Air Intakes for 2005 Cadillac CTSs

Tech Smart – Fuel Injection Throttle Body (Part No.S20004)

Fuel Injection Throttle Body

from

$396.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Cardone New – New Fuel Injection Throttle Body (Part No.6E-3015)

New Fuel Injection Throttle Body

from

$499.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:
  • Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
  • Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
  • 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
  • Each unit is guaranteed to fit and function like the original.
See More

ACDelco – GM Original Equipment Throttle Position Sensor (Part No.C7012488075ACD)

GM Original Equipment Throttle Position Sensor

from

$209.81
The ACDelco GM Original Equipment Throttle Position Sensor is a GM-recommended replacement for your vehicle’s original component. The TPS reports the throttle position to the engine control module, which uses the signal to adjust fuel delivery and ignition timing. This throttle position sensor kit meets the performance standards you would expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Throttle Position Sensor (Part No.SS10468)

Throttle Position Sensor

from

$81.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – Multi Purpose Connector (Part No.PTA3259)

Multi Purpose Connector

from

$65.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Steel Cup Expansion Plug 1 In., SC, Height 0.250

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each)

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Headlight Level Sensor Connector (Part No.PTA1562)

Headlight Level Sensor Connector

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 92438)

Engine Intake Manifold Gasket Set

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96103)

Engine Intake Manifold Gasket Set

from

$65.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97240-2)

Engine Intake Manifold Gasket Set

from

$47.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Pro-Flo XT Small Block Chevy LS2 EFI Black Intake Manifold (Part No.71403)

Pro-Flo XT Small Block Chevy LS2 EFI Black Intake Manifold

from

$823.99
Edelbrock part #71403 Pro-Flo XT LS2 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features include a 90mm throttle bore opening and

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 10.2 in. Front Height, 10.2 in. Center Height, 10 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Edelbrock – Pro-Flo XT Small Block Chevy LS2 EFI Intake Manifold (Part No.7140)

Pro-Flo XT Small Block Chevy LS2 EFI Intake Manifold

from

$700.99
Edelbrock part #7140 Pro-Flo XT LS2 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm throttle bore opening and 2.75″ por

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 10.2 in. Front Height, 10.2 in. Center Height, 10 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Holley – Intake Manifold (Part No.300-126)

Intake Manifold

from

$983.99
The Modular Mid-Rise intake utilizes the popular Holley LS1/LS2/LS6 cathedral port Mid-Rise 2 x 4 intake Manifold along with a purpose built plenum base Adapter and a Holley 92MM EFI plenum top which converts it into a Mid-Rise EFI intake manifold. With a max overall height of only 10.44in., the Mid-Rise Manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500-6,500 RPM and limited hood clearance. It’s perfect for a blow-thru or turbocharged application. Being part of the Holley modular intake line means that this intake is not only available as a complete kit with intake, adapter, 92MM top and fuel rails, but all parts can also be purchased separately for a custom intake build. The plenum Adapter (PN 300-231) will accept all of the popular Holley Hi-Ram plenum tops as a foundation for custom induction systems.

Product Features:
  • Performance To 6500 Rpm w/ Look Of A Racing EFI Intake Manifold
  • Dualplane Layout w/EFI Manifold Plenum For Great Mid-Range Torque
  • Great For Supercharged Or Turbocharged Engines
  • Power Band From 1500-6500 RPM
  • May Require An Aftermarket Hood For Some Vehicle Applications
  • Cast Aluminum Construction
  • 92Mm EFI Plenum Top
See More

MSD Ignition – Atomic; AirForce; LS1; 2; 6; Intake Manifold (Part No.2702)

Atomic; AirForce; LS1; 2; 6; Intake Manifold

from

$1230.00
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.

Product Features:
  • Polymer Material Resists Heat Soak
  • 103mm Throttle Bore For Greater Air Flow
  • Direct Flow Path Runner Design
  • Allows For The Use Of Stock Fuel Rails
See More

Mahle – FI Throttle Body Mou (Part No.C7001292101MAH)

FI Throttle Body Mou

from

$21.74
FI Throttle Body Mou

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-16610-00)

Fuel Injection Throttle Body Mounting Gasket

from

$8.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.12634371)

Fuel Injection Throttle Body Mounting Gasket

from

$11.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injection Throttle Body Mounting Gasket (Part No.40-5083)

Fuel Injection Throttle Body Mounting Gasket

from

$22.99
GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Fuel Injector Seal Kit

from

$7.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Cornering Light Connector (Part No.PTA2089)

Cornering Light Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Intake Manifold Tuning Valve Solenoid Pigtail (Part No.PT2045)

Intake Manifold Tuning Valve Solenoid Pigtail

from

$30.49
ACDelco GM Original Equipment Engine Intake Manifold Tuning Valve Solenoid Connector is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This original equipment connector will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Upgrade your 2005 Cadillac CTS with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2005 Cadillac CTS, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Air Intakes are key to keeping your CTS functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Air Intakes for the 2005 Cadillac CTS, designed to meet your needs without breaking the bank. From Carburetor Kit replacements to Throttle Body Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2005 Cadillac CTS at great prices. Our Air Intakes inventory for this model ranges from just $2.29 to $1,230.00, with an average price of $143.34. Our 26 Air Intakes in stock come from 14 trusted brands, so you’re sure to find the right part for your 2005 Cadillac CTS without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Cadillac CTS, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, and more. FELPRO Air Intakes start at just $34.99 and boast an impressive 5 stars average rating from customers. With 19 customer reviews and counting, our 2005 Cadillac CTS Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Cadillac CTS is always ready to roll. We’re committed to providing you with everything you need to keep your CTS in top shape, all in one place. Start shopping confidently below for your 2005 Cadillac CTS!

Best-Selling Carburetor Kits for 2005 Cadillac CTSs

Enhance the driving experience in your Cadillac with 1 quality Carburetor Kit components, starting at $7.79.

Carquest Premium – Fuel Injector Seal Kit (Part No.AS008)

Fuel Injector Seal Kit

from

$7.79
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Most Popular 2005 Cadillac CTS Throttle Body Parts

Customize your Cadillac with 5 Throttle Body Parts products like Throttle Bodies, all priced under $519.19.

Tech Smart – Fuel Injection Throttle Body (Part No.S20004)

Fuel Injection Throttle Body

from

$396.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

GM Genuine Parts – Fuel Injection Throttle Body (Part No.217-2253)

Fuel Injection Throttle Body

from

$307.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000291453ACD)

GM Original Equipment Fuel Injection Throttle Body

from

$519.19
The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Electronic Throttle Body (Part No.977-018)

Electronic Throttle Body

from

$258.99
Original equipment throttle bodies often fail from moisture and oil intrusion and failed internal electronics. This Dorman OE FIX throttle body features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.

Product Features:
  • Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
  • New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
  • Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
  • Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-3016)

Electric Throttle Body: Remanufactured

from

$207.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Top Picks for 2005 Cadillac CTS Intake Manifold Parts

Upgrade Cadillac CTSs with top-quality Intake Manifold Parts parts, including 13 OEM and aftermarket selections for your 2005 model.

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 92438)

Engine Intake Manifold Gasket Set

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96969)

Engine Intake Manifold Gasket Set

from

$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Steel Cup Expansion Plug 1 In., SC, Height 0.250

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each)

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MSD Ignition – Atomic; AirForce; LS1; 2; 6; Intake Manifold (Part No.2702)

Atomic; AirForce; LS1; 2; 6; Intake Manifold

from

$1230.00
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.

Product Features:
  • Polymer Material Resists Heat Soak
  • 103mm Throttle Bore For Greater Air Flow
  • Direct Flow Path Runner Design
  • Allows For The Use Of Stock Fuel Rails
See More

Holley – Intake Manifold (Part No.300-126)

Intake Manifold

from

$983.99
The Modular Mid-Rise intake utilizes the popular Holley LS1/LS2/LS6 cathedral port Mid-Rise 2 x 4 intake Manifold along with a purpose built plenum base Adapter and a Holley 92MM EFI plenum top which converts it into a Mid-Rise EFI intake manifold. With a max overall height of only 10.44in., the Mid-Rise Manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500-6,500 RPM and limited hood clearance. It’s perfect for a blow-thru or turbocharged application. Being part of the Holley modular intake line means that this intake is not only available as a complete kit with intake, adapter, 92MM top and fuel rails, but all parts can also be purchased separately for a custom intake build. The plenum Adapter (PN 300-231) will accept all of the popular Holley Hi-Ram plenum tops as a foundation for custom induction systems.

Product Features:
  • Performance To 6500 Rpm w/ Look Of A Racing EFI Intake Manifold
  • Dualplane Layout w/EFI Manifold Plenum For Great Mid-Range Torque
  • Great For Supercharged Or Turbocharged Engines
  • Power Band From 1500-6500 RPM
  • May Require An Aftermarket Hood For Some Vehicle Applications
  • Cast Aluminum Construction
  • 92Mm EFI Plenum Top
See More

Mahle – Intake Manifold Gasket Set (Part No.A8043431419MAH)

Intake Manifold Gasket Set

from

$94.68
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10331-01)

Intake Manifold Gasket Set: Multi Piece Set

from

$73.99
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
  • It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
  • Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
See More

Mahle – Intake Manifold Gasket (Part No.A8040204593MAH)

Intake Manifold Gasket

from

$67.49
Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
See More

MAHLE Original – Intake Manifold Gasket Set (Part No.MS19605)

Intake Manifold Gasket Set

from

$56.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Cornering Light Connector (Part No.PTA2089)

Cornering Light Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mr. Gasket – Gaskets (Part No.61050G)

Gaskets

from

$36.49
Set of eight intake seals for original equipment style heads with cathedral ports.

Product Features:
  • OEM Style Molded O-Ring Style Gaskets
  • Replaces GM # 12533587
See More

ACDelco – Intake Manifold Tuning Valve Solenoid Pigtail (Part No.PT2045)

Intake Manifold Tuning Valve Solenoid Pigtail

from

$30.49
ACDelco GM Original Equipment Engine Intake Manifold Tuning Valve Solenoid Connector is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This original equipment connector will provide the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

In-Demand Throttle Bodies & Carb Parts for 2005 Cadillac CTSs

Select from 7 premium Throttle Bodies & Carb Parts parts for your 2005 Cadillac CTS, with prices ranging from $21.74 to $120.45.

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Delphi – Throttle Position Sensor (Part No.SS10468)

Throttle Position Sensor

from

$81.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Delphi – Throttle Position Sensor (Part No.C70121230209DEL)

Throttle Position Sensor

from

$120.45
Delphi Digital Speed and Position Sensors are based on integrated adaptive threshold Hall effect technology. They sense the speed and position of a target created with various sense features that are machined, stamped, drawn, or magnetically encoded. They can sense speeds as low as zero RPM. Delphi Speed and Position Sensors feature silicon Hall sense elements. The sensor assembly uses proven design features and assembly processes to provide a reliable solution in demanding automotive environments. The sensor design is modular to enable re-use of proven components and to provide low risk package modifications for new applications. They utilize an adaptive threshold control scheme providing robust performance that improves the air gap capability and reduces the placement accuracy requirements between the sensor and the target. Delphi also offers designs that help protect the sensor from transients and from electromagnetic interference (EMI). Power can be provided by either battery or regulated voltage supplies, enabling even more controller flexibility. Delphi’s Digital Speed and Position Sensors can operate on conditioned voltage from 4.5 to 16 volts.

Product Features:
  • Modular design based on proven features and assembly processes provides rapid application optimization with flexible package geometry and high reliability
  • Three-wire open collector output, open drain output, or two-wire current output allow flexible controller design
  • Accurate square wave output eliminates square-up function in the controller
  • Transient protection helps protect against stray electro-magnetic fields interface
  • Various mounting applications provide choice of many existing designs, or custom designs
  • Adaptive Hall signal schemes provide improved timing accuracy, optimized sensor air gap and tilt sensitivity, and zero speed sensing capability
  • Single element option offers simplified design, and valid power on state (VPOS) for camshaft applications to minimize engine synchronization timing
  • Dual element differential option offers extremely accurate gear edge detection, peak detector circuitry that is immune to tilt or off-center failure mode, and gain-adjust circuitry that reduces the effect of minor gear anomalies
  • Enhanced sensing capability helps reduce emissions and improve reliability and drivability
See More

Carquest Premium – Throttle Sensor (Part No.ECC1217)

Throttle Sensor

from

$114.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Multi Purpose Connector (Part No.PTA3259)

Multi Purpose Connector

from

$65.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Headlight Level Sensor Connector (Part No.PTA1562)

Headlight Level Sensor Connector

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mahle – FI Throttle Body Mou (Part No.C7001292101MAH)

FI Throttle Body Mou

from

$21.74
FI Throttle Body Mou

Top-Rated Air Intakes Brands For Your 2005 Cadillac CTS

Shop for the best-rated brands offering Air Intakes and other products for your 2005 Cadillac CTSs. Below you’ll find some of our best rated Air Intakes from FELPRO, and more. Air Intakes from these brands that fit a 2005 CTS start at just $34.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2005 Cadillac CTS Air Intakes

When it comes to maintaining or upgrading your 2005 Cadillac CTS, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2005 Cadillac CTS. With over 2 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $34.99, with an average price of just $45.99. Plus, with over 13 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Intake Manifold Gasket Set
from
$56.99

(6)

Engine Intake Manifold Gasket Set

“Perfect replacement”

Engine Intake Manifold Gasket Set
from
$34.99

(7)

Engine Intake Manifold Gasket Set

“Worked out great for a Fast 102 intake, corvette LS6”

FAQs for 2005 Cadillac CTS Air Intakes

Which Air Intakes are best-sellers for 2005 Cadillac CTSs?

Out of 26 Air Intakes that fit 2005 Cadillac CTSs, the following parts are the top sellers:

What’s the price range for 2005 Cadillac CTS Air Intakes?

Air Intake prices for the 2005 Cadillac CTS start at $2.29 and go up to $1,230.00 for the most premium parts.

What’s the average price of a Air Intake for a 2005 Cadillac CTS?

The average price for Air Intakes for the 2005 Cadillac CTS is $143.34. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Cadillac CTS model years?

Yes, we currently carry Air Intakes for 16 model years of Cadillac CTSs between 2003 and 2019. Air Intakes are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Air Intakes for my 2005 Cadillac CTS?

The cheapest 2005 Cadillac CTS Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 2005 Cadillac CTS?

Out of 19 reviews by customers, our 2005 Cadillac CTS Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2005 Cadillac CTS and their top-rated products:

What types of Air Intakes do you sell for my 2005 Cadillac CTS?

As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 2005 Cadillac CTS:

Can I get help with 2005 Cadillac CTS Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Air Intakes and more.

What is your return policy for Cadillac CTS Air Intakes?

Advance Auto Parts keeps returns simple. For new Cadillac CTS Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.