2005 BMW M3 Brake Rotors and Drums

Essential 2005 BMW M3 Brake Rotors and Drums

Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N100062861ZFZ)

Coat-Z Sport Brake Disc (Rotor)

from

$136.54
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Zimmermann – Formula-Z High Carbon Coat-Z Brake Disc (Rotor) (Part No.N1000334047ZFZ)

Formula-Z High Carbon Coat-Z Brake Disc (Rotor)

from

$405.86
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load. The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimized chassis structures. COAT-Z – Coat-Z is a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Formula Z – Bake Disc – The composite or compound brake disc named Formula Z is suitable for motorsport applications due to its special design. In contrast to the fully cast-iron brake disc, the friction ring (cast iron) and hub (aluminum alloy) are connected by steel pins. The resulting, floating construction reduces the thermal buffering of the friction ring in the operating temperature state substantially, because the friction ring can freely expand under thermal stress (e.g. when braking from high speeds or several consecutive brake applications). The use of aluminium alloy also considerably reduces the unsprung masses on the vehicle. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Stoptech – Sport Slotted Brake Rotor (Part No.126.34054SL)

Sport Slotted Brake Rotor

from

$189.99
StopTech is the high performance and racing brand from Centric Parts – a leading innovator of world class brake components and systems for production-based race cars and high performance vehicles on the street and track. StopTech was the first to offer balanced brake upgrades for production cars and remains the worldwide leader with over 700 platform offerings that dramatically improve overall braking performance.

Product Features:
  • Premium e-coated rotor with advanced metallurgy that greatly reduces pad squeal
  • Especially effective with higher friction, European style brake pad compounds
  • Slotted for increased bite, improved looks and better performance
See More

Zimmermann – Brake Disc (Part No.N100019735ZIC)

Brake Disc

from

$60.82
Brake Disc

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000148451ZIC)

Coat-Z Brake Disc (Rotor)

from

$116.56
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Zimmermann – Formula-Z High Carbon Coat-Z Brake Disc (Rotor) (Part No.N100062860ZFZ)

Formula-Z High Carbon Coat-Z Brake Disc (Rotor)

from

$137.06
The Zimmermann Formula Z brake disc was designed with the aim of teaming simple installation with optimum braking effect under high mechanical and thermal load. The compound brake disc developed by Zimmermann accommodates the increased demands incurred by engine tuning and optimized chassis structures. COAT-Z – Coat-Z is a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Formula Z – Bake Disc – The composite or compound brake disc named Formula Z is suitable for motorsport applications due to its special design. In contrast to the fully cast-iron brake disc, the friction ring (cast iron) and hub (aluminum alloy) are connected by steel pins. The resulting, floating construction reduces the thermal buffering of the friction ring in the operating temperature state substantially, because the friction ring can freely expand under thermal stress (e.g. when braking from high speeds or several consecutive brake applications). The use of aluminium alloy also considerably reduces the unsprung masses on the vehicle. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Brembo – Sport Line Brake Rotor Set (Part No.N1002134275BRE)

Sport Line Brake Rotor Set

from

$395.62
CROSS DRILLED SPORT LINE DISC SET – 1 SET = 2 DISCS Reliable on the road, superior on the track. The discs of the Brembo Sport range are ideal for enthusiasts who use their vehicles for both normal road use and more performance-oriented driving. With their advanced characteristics, these discs combine the advantages in terms of durability of the best street discs with superior performance suitable for moderate track use. More flexibility and durability, at all temperatures. For greater versatility and to increase their ability to withstand extreme stress, Brembo Sport brake discs are made from high-carbon cast iron for improved thermal and mechanical resistance. They also feature exclusive pillar venting technology, which improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled finishes are designed and executed with meticulous precision. These holes in the braking surface help dissipate heat and eliminate brake dust and gases. Every Brembo product is designed in relation to the specific performance requisites. The discs of the Sport range are specifically designed to minimize thermal distortion and disc warping even in the most severe operating conditions. As a result, they ensure outstanding braking power in both everyday traffic and the most extreme high performance driving, yet are easily accessible to all enthusiasts. Immediate, consistent braking in all conditions The unique cross-drilled finish is another exclusive Brembo feature which improves braking consistency by dissipating the heat generated and gas released as the pads come into contact with the discs, keeping the pad surface both cool and clean. Cross drilling interrupts the water film forming when driving in the wet for improved brake response. This effect is most evident with cross-drilled discs, due to the different solid/hollow ratio of the surface and the possibility for water to flow through the ventilation holes.

Product Features:
  • Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
  • 100% compatible with the standard components.
  • The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
  • The protective galvanizing treatment improves the disc’s appearance and prevents corrosion.
  • The discs used are produced with high carbon cast iron.
See More

Otto Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N100057102ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$149.17
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Otto Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N100057101ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$148.32
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100030380ZIC)

Coat-Z Brake Disc (Rotor)

from

$80.22
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000267162OEA)

Brake Disc (Rotor)

from

$375.23
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

2005 BMW M3 Brake Rotors and Drums

Maybe you’re in the middle of a full rebuild of that 2005 BMW M3. Maybe you just need a couple of Brake Rotors and Drums. Either way, Advance Auto Parts has 3 different Brake Rotors and Drums in our inventory ranging from $116.56 to $375.23. That means you can find the exact parts or products you need to keep that 2005 BMW M3 running smoothly.

Brake Rotors and Drums are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2005 BMW M3. Original Equipment, Stoptech, and Zimmerman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Brake Rotors and Drums for your 2005 BMW M3, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Brake Rotors and Drums to keep your 2005 BMW M3 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Brake Rotors and Drums Brands To Make Your 2005 BMW M3 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 BMW M3 demands trusted brand parts and products to keep it running. Many trusted brands of Brake Rotors and Drums make up Advance Auto Parts’ inventory, and all are ready to help make your M3 the best it can be. Be sure to browse some of our top Brake Rotors and Drums brands and parts.

FAQs for 2005 BMW M3 Brake Rotors and Drums

What are the most purchased Brake Rotors and Drums for the 2005 BMW M3?

Out of 3 Brake Rotors and Drums for the 2005 BMW M3, the most popular in our inventory are:
Brake Disc (Rotor)
from $375.23
This product is not rated
Brake Disc (Rotor)
Front Brake Rotors
Coat-Z Brake Disc (Rotor)
from $116.56
This product is not rated
Coat-Z Brake Disc (Rotor)
Rear Brake Rotors
Sport Slotted Brake Rotor
from $189.99
This product is not rated
Sport Slotted Brake Rotor
Rear Brake Rotors