2005 BMW 745Li Wheels and Tires

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader€™s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader€™s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 19 X 10, 10 Spoke, 5 Lug, 120MM Bolt Pattern, Rear, Silver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle.

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader€™s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard Lug Bolts are designed & manufactured in the USA. Wheel Lock bolts are designed in USA and manufactured in EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. McGard lug bolts enhance the look of any wheel. 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The chrome plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal. The computer generated key designs allow for an infinite number of key patterns. Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security and safety. Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use when using wheel spacers. Before installing, verify lug/lock bolt thread size, seating surface type (Cone/Radius), shank length and style as recommended by the wheel manufacturer. MINIMUM of 5 1/2 full bolt rotations of engagement required. This product contains globally sourced materials/components.

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

The TS508WFK-4 Kit includes the TS508Wi-Fi handheld TPMS unit and four rubber stemmed 1-Sensors. Use the TS508Wi-Fi to activate, read and relearn all known TPMS sensors and program the 1-Sensor. The 1-Sensor offers 99 percent coverage. Program the 1-Sensor to replace OE sensors. Free tool software updates for the life of the tool to ensure the latest vehicle coverage. Update software via Wi-Fi; no PC required. Tool comes with limited warranty.

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

McGard lug bolts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. McGard is an Original Equipment supplier to most car lines around the world. McGard lug bolts enhance the look of any wheel! 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The triple-nickel chrome plating is guaranteed for life not to chip, peel or rust.

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Ball-seat valve stem assembly IGNITION/EMISSION – EMISSION SENSORS & VALVES>SENSORS, VALVES & TRANSMITTERS>TPMS>TPMS KITS from Dill Air Control

Huf North America Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut, RDV024.

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Grey Kit for Audi, Bentley, BMW, Bugatti, Ferrari, Land Rover, Mercedes, Mini, Porche, Rolls Royce, & Volkswagen

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader€™s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

The convenient way to order lug bolts and wheel locks. Contains all the fasteners that you need to install 4 wheels and tires. McGard Lug Bolts are designed & manufactured in the USA. Wheel Lock bolts are designed in USA and manufactured in EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. McGard lug bolts enhance the look of any wheel. 2-piece design utilizes a free-spinning seat for optimum safety and performance. This design, in conjunction with a proprietary thread coating, protects against galling, helps prevent seized or difficult to remove lug bolts and enhances torque and tension. The chrome with black PVD plating is guaranteed for life not to chip, peel or rust. These easy-to-use, one-piece wheel locks function like regular lug bolts, but require a special key tool for installation and removal. The computer generated key designs allow for an infinite number of key patterns. Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security and safety. Replaces Volvo M14x1.5 cone seat lug bolt part numbers 312-023-36 and 312-002-40. For use on Original Equipment cone seat aluminum wheels and Aftermarket cone seat aluminum wheels that use the Original Equipment fasteners. NOT for use when using wheel spacers. Before installing, verify lug/lock bolt thread size, seating surface type (Cone/Radius), shank length and style as recommended by the wheel manufacturer. MINIMUM of 5 1/2 full bolt rotations of engagement required. This product contains globally sourced materials/components.