2005 BMW 330xi Engine Parts

Name: Engine Variable Valve Timing (VVT) Oil Control Valve
Brand: Carquest Premium
SKU: VVA1565
Price: 62.99 USD

Below you will find various in-demand BMW Engine Parts, components and accessories for your 2005 330xi. Advance Auto Parts has popular 330xi parts like Engine Timing Parts, Valve Cover and Cylinder Heads, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other 330xi model years including 2001, 2002, 2003, 2004, 2006 and more. Select a category of 2005 BMW 330xi Engine Parts below and start saving instantly.

Popular 2005 BMW 330xi Engine Parts Categories

Valve Covers

Engine Variable Timing Solenoids

Engine Oil Temperature Senders

Engine Oil Temperature Sensors

Valve Cover Gaskets

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Mounts

Cylinder Head Temperature Sensors

Oil Pans

Valve Cover Grommets

Cylinder Head Gaskets

Oil Level Sensors

Crankshaft Seals

Oil Caps

Camshaft Position Sensor Connectors

Timing Chain Tensioners

O-Rings

Main Bearing Repair Sleeves

Timing Cover Seals

Engine Variable Timing Oil Control Valves

Engine Valve Stem Seals

Engine Oil Separators

Oversized Main Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Timing Chains

Camshaft Seals

Oil Pump Chains

Engine Coolant Reservoir Kits

Engine Oil Seal Rings

Timing Chain Guides

Engine Valves

Camshaft Followers

Oil Level Sender Gaskets

Engine Oil Sensor Housing O-Rings

Engine Oil Lines

Engine Valve Locks

Fuel Tank Sending Unit Gaskets

Dipstick Housing Gaskets

Engine Valve Guides

Piston Pin Bushing Sets

Engine Cylinder Head Nuts

Valve Cover Washers

Engine Valve Cover Kits

Timing Chain Tensioner Gaskets

Engine Intake Pipe Seals

Engine Cooling Fan Switch Seals

Engine Valve Cover Bushing

Essential Engine Parts for 2005 BMW 330xis

from

$62.99

Engine Variable Valve Timing (VVT) Oil Control Valve

from

$65.68

The Original Equipment Engine Coolant Temperature Sensor is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$301.99

The Engine Oil Separator is part of the positive crankcase ventilation (PCV) system. This part is typically located on the valve cover and is designed to trap engine oil vapors in the device and return the vapors back into the engine crankcase. When this part becomes plugged oil vapors will be ingested into the intake air system and cause excessive oil consumption and smoke from the tailpipe.

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$82.99

Redi-Sleeve

from

$9.11

Oil Level Sender O-R

from

$29.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$7.99

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

Prevents moisture and debris from entering and contaminating the system
Direct fit
Manufactured to strict engineering standards/specifications in materials and tolerances
Produced by an original equipment supplier

from

$73.09

WARNING: This item cannot be returned for a replacement or refund if opened! Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials. All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$10.76

Fuel Sender Seal

from

$6.26

Valve Cover Mount

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$42.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$1.18

SEAL RING – COPPER

from

$146.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$27.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$266.69

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$3.76

Oil Dipstick Seal

from

$134.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra

from

$249.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$521.69

Oil Pan

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$23.99

SHAFT SEAL

from

$23.99

Product Features:

Brand may vary by location

from

$8.06

Valve Cover Nut

from

$30.02

Timing Guide Rail

from

$33.99

Timing Guide Rail

Upgrade your 2005 BMW 330xi with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2005 BMW 330xi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Engine Parts are key to keeping your 330xi functioning at its best. At Advance Auto Parts, we offer a wide selection of 120 Engine Parts for the 2005 BMW 330xi, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2005 BMW 330xi at great prices. Our Engine Parts inventory for this model ranges from just $1.07 to $905.99, with an average price of $101.47. Our 120 Engine Parts in stock come from 38 trusted brands, so you’re sure to find the right part for your 2005 BMW 330xi without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 BMW 330xi, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Carquest Premium, National, and more. FELPRO Engine Parts start at just $9.49 and boast an impressive 5 stars average rating from customers. Carquest Premium and National also bring quality to the table, with Engine Parts available starting at $7.49, and at an average 4 stars rating. With 25 customer reviews and counting, our 2005 BMW 330xi Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 BMW 330xi is always ready to roll. We’re committed to providing you with everything you need to keep your 330xi in top shape, all in one place. Start shopping confidently below for your 2005 BMW 330xi!

Best-Selling Engine Timing Parts for 2005 BMW 330xis

Enhance the driving experience in your BMW with 10 quality Engine Timing Part components, starting at $7.49.

show more show less

from

$30.02

Timing Guide Rail

from

$33.99

Timing Guide Rail

from

$153.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$93.29

Timing Chain

from

$62.99

Engine Variable Valve Timing (VVT) Oil Control Valve

from

$61.87

Timing Chain

from

$32.04

Chain Tensioner Pist

from

$27.57

Timing Chain Tension

from

$23.99

SHAFT SEAL

from

$7.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

Most Popular 2005 BMW 330xi Valve Cover and Cylinder Heads

Customize your BMW with 30 Valve Cover and Cylinder Heads products like Cylinder Head Bolt Sets, Cylinder Head Gaskets, and Cylinder Head Gasket Sets, all priced under $527.38.

show more show less

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$19.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$3.14

Valve Keeper

from

$132.41

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$42.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$134.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra

from

$527.38

Cylinder Head Gasket

from

$491.08

Valve Cover

from

$484.36

Cylinder Head Gasket

from

$348.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Manufactured from multiple layers of full hard stainless steel.
Premium FKM rubber coating seals minor surface imperfections.
Precision embossed beads seal combustion and fluids under the most demanding conditions.
Available in multiple thicknesses to maintain valvetrain geometry and compression ratio on machined castings.

from

$338.85

Valve Cover

from

$319.99

Rein OE quality valve cover kits are designed and manufactured to be direct replacements for OE units. Kits contain common failure items including breather hoses, oil caps and hardware that need to be changed when the valve cover is replaced. Rein valve covers have identical dimensions to the genuine parts. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Product Features:

Direct Replacement
Kitted with installation components ensuring easy replacement including hardware, oil cap and breather hoses.
Manufactured from high quality materials to ensure a long service free life.
Supplied with high quality gasket to prevent leaks.

from

$278.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing..

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function.
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$257.99

Guaranteed fitment

Product Features:

Cracked valve covers can create troublesome vacuum leaks and allow leaking oil to damage engine components
URO Parts’ replacement valve covers are precisely manufactured to OE dimensions for easy installation and maximum protection of valvetrain
Durable high-quality metal or plastic material is corrosion-resistant and withstands oil vapor and intense engine heat

from

$249.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$142.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Manufactured from multiple layers of full hard stainless steel.
Premium FKM rubber coating seals minor surface imperfections.
Precision embossed beads seal combustion and fluids under the most demanding conditions.
Available in multiple thicknesses to maintain valvetrain geometry and compression ratio on machined castings.

from

$142.99

Manufactured from multiple layers of full hard stainless steel.
Premium FKM rubber coating seals minor surface imperfections.
Precision embossed beads seal combustion and fluids under the most demanding conditions.
Available in multiple thicknesses to maintain valvetrain geometry and compression ratio on machined castings.

from

$123.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$73.20

Cylinder Head Bolt Set

from

$64.37

Cyl. Head Bolt Set

from

$56.99

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
All kits are application specific.
Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
Each set comes with special assembly lube to ensure proper torque when tightening.
All kits are boxed and shrink wrapped.

from

$49.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$26.48

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$23.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$11.35

Valve Guide

from

$10.79

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$8.06

Valve Cover Nut

from

$6.26

Valve Cover Mount

from

$3.14

Valve Keeper

from

$2.96

Valve Cover Washer

Top Picks for 2005 BMW 330xi Camshafts

Upgrade BMW 330xis with top-quality Camshafts parts, including 15 OEM and aftermarket selections for your 2005 model.

show more show less

from

$41.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$121.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$70.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$19.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$177.35

Camshaft Position Sensor

from

$94.40

The Vemo Camshaft Position Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Made in Germany OE Quality
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$142.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$224.25

Camshaft Position Se

from

$146.99

The Vemo Camshaft Position Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Made in Germany OE Quality
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$115.41

Camshaft Position Sensor, With O-ring

from

$89.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$87.99

Engine Camshaft Position Sensor

from

$24.98

Camshaft Follower

from

$10.49

GENERAL SEAL

In-Demand Engine Mounts for 2005 BMW 330xis

Select from 3 premium Engine Mounts parts for your 2005 BMW 330xi, with prices ranging from $69.99 to $104.93.

show more show less

from

$69.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 92-13;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1992-2013
Weight approx: 2 Lbs
HYDRAULIC

from

$104.93

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$92.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
Produced by an Original Equipment supplier
Matches Original Equipment design specifications
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

Most Sold 2005 BMW 330xi Engine Gaskets and Seals

Explore our best-selling BMW parts for the 2005 330xi among 24 OEM and aftermarket options starting from $1.07.

show more show less

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$73.09

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$58.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$40.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Made from premium materials for durability
Designed to withstand high underhood temperatures
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$1.07

Seal Ring – Aluminum

from

$9.11

Oil Level Sender O-R

from

$3.76

Oil Dipstick Seal

from

$32.58

Oil Pan Gasket

from

$67.09

WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

High-quality design and engineering for perfect performance
Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

from

$71.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds original equipment specifications.
Zero engine leakage for late model vehicles.

from

$29.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$18.08

Timing Cover Gasket

from

$16.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$15.99

Valve Stem Seal Kit

from

$13.43

Valve Stem Seal Kit

from

$11.74

Timing Cover Gasket

from

$10.76

Fuel Sender Seal

from

$9.79

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$7.49

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$3.31

The APA/URO Engine Cooling Fan Switch Seal is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$1.53

Chain Tensioner Gask

from

$1.21

SEAL RING

from

$1.18

SEAL RING – COPPER

Top-Rated Engine Parts Brands For Your 2005 BMW 330xi

Shop for the best-rated brands offering Engine Parts and other products for your 2005 BMW 330xis. Below you’ll find some of our best rated Engine Parts from FELPRO, Carquest Premium, and National, and more. Engine Parts from these brands that fit a 2005 330xi start at just $7.49 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2005 BMW 330xi Engine Parts

When it comes to maintaining or upgrading your 2005 BMW 330xi, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2005 BMW 330xi. With over 7 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.49, with an average price of just $99.49. Plus, with over 21 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$249.99

This product is not rated

Cylinder Head Gasket Set

“”

from
$134.99

This product is not rated

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“”

from
$123.99

This product is not rated

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“”

Popular Carquest Premium 2005 BMW 330xi Engine Parts

Carquest Premium auto parts is one of the highest quality Engine Part brands in the market. Any 2005 BMW 330xi owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2005 330xi, Advance Auto Parts carries a full inventory of 11 Carquest Premium Engine Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Carquest Premium Engine Parts range from $12.49 to $301.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$121.99

This product is not rated

Camshaft Sensor

“”

from
$46.99

This product is not rated

Crankshaft Sensor

“”

from
$70.99

This product is not rated

Camshaft Sensor

“”

FAQs for 2005 BMW 330xi Engine Parts

Which Engine Parts are best-sellers for 2005 BMW 330xis?

Out of 120 Engine Parts that fit 2005 BMW 330xis, the following parts are the top sellers:

Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (20688770) – $56.99
Crankshaft Sensor (12351896) – $46.99
Oil Filler Cap (15480084) – $21.99

What’s the price range for 2005 BMW 330xi Engine Parts?

Engine Part prices for the 2005 BMW 330xi start at $1.07 and go up to $905.99 for the most premium parts.

What’s the average price of a Engine Part for a 2005 BMW 330xi?

The average price for Engine Parts for the 2005 BMW 330xi is $101.47. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other BMW 330xi model years?

Yes, we currently carry Engine Parts for 5 model years of BMW 330xis between 2001 and 2006. Engine Parts are bought most frequently for the following model years: 2006, 2004, 2003, 2002, and 2001.

What are the cheapest Engine Parts for my 2005 BMW 330xi?

The cheapest 2005 BMW 330xi Engine Parts we carry in stock are:

Seal Ring – Aluminum (11973200) – $1.07
SEAL RING – COPPER (11263320) – $1.18
SEAL RING (11075008) – $1.21
Chain Tensioner Gask (11973154) – $1.53
Valve Cover Washer (12073669) – $2.96

What are the top-rated Engine Parts that fit the 2005 BMW 330xi?

Out of 25 reviews by customers, our 2005 BMW 330xi Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2005 BMW 330xi and their top-rated products:

Engine Gaskets and Seals
- Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (20688770) – $56.99
- Engine Valve Cover Gasket Set (21021937) – $61.99
- Elring Intake Manifold Gasket Set (10793716) – $73.09
Valve Cover and Cylinder Heads
- Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (20688770) – $56.99
- Engine Valve Cover Gasket Set (21021937) – $61.99
- Elring Intake Manifold Gasket Set (10793716) – $73.09

What types of Engine Parts do you sell for my 2005 BMW 330xi?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2005 BMW 330xi:

Can I get help with 2005 BMW 330xi Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Engine Parts and more.

What is your return policy for BMW 330xi Engine Parts?

Advance Auto Parts keeps returns simple. For new BMW 330xi Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 BMW 330xi Engine Parts

Carquest Premium – Engine Variable Valve Timing (VVT) Oil Control Valve (Part No.VVA1565)

Original Equipment – Engine Coolant Temperature Sensor (Part No.C6020168981OEA)

Carquest Premium – Engine Oil Separator (Part No.ZAE1001)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40681)

National – Redi-Sleeve (Part No.99353)

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-08)

Rein – Cap-Oil (Part No.CPL0022)

Elring – Elring Intake Manifold Gasket Set (Part No.A8043121038ELR)

A.P.A. URO – Fuel Sender Seal (Part No.E2050137234APA)

Febi – Valve Cover Mount (Part No.A316472159FEB)

Felpro – OIL PAN GASKET SET (Part No.OS 30869 R)

MAHLE Original – Engine Cylinder Head Bolt Set (Part No.GS33464)

Elring – SEAL RING – COPPER (Part No.4M20011240ELR)

Carquest Premium – Engine Oil Level Sensor (Part No.LAC1022)

National – Shaft Repair Sleeve (Part No.99114)

Glyco – Glyco Main Bearing Set (Part No.A201030105GLY)

CRP – Oil Dipstick Seal (Part No.A1120266451CRP)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26275 PT)

Felpro – Cylinder Head Gasket Set (Part No.HS 26245 PT)

MTC – Oil Pan (Part No.A6060285996MTC)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50860 R)

FAG US – SHAFT SEAL (Part No.SS6284)

Driveworks – Crankshaft Seal (Part No.S-229005)

APA/URO Parts – Valve Cover Nut (Part No.A3110336921APA)

Febi – Timing Guide Rail (Part No.A504072685FEB)

Febi – Timing Guide Rail (Part No.A5040119445FEB)

Febi – Timing Guide Rail (Part No.A504072685FEB)

Febi – Timing Guide Rail (Part No.A5040119445FEB)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1085)

Iwis – Timing Chain (Part No.A510091396IWI)

Carquest Premium – Engine Variable Valve Timing (VVT) Oil Control Valve (Part No.VVA1565)

Iwis – Timing Chain (Part No.A510091395IWI)

Febi – Chain Tensioner Pist (Part No.A517091572FEB)

Febi – Timing Chain Tension (Part No.A511366551FEB)

FAG US – SHAFT SEAL (Part No.SS6284)

National – Multi Purpose Seal (Part No.223802)

Felpro – VALVE COVER GROMMET SET (Part No.ES 72490)

Carquest Premium – Cylinder Head Temperature Sensor with Washer (Part No.WTC1071)

TRW – Valve Keeper (Part No.A4070774061TRW)

Elring – Cylinder Head Gasket Set (Part No.A8100156822ELR)

MAHLE Original – Engine Cylinder Head Bolt Set (Part No.GS33464)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26275 PT)

Mahle – Cylinder Head Gasket (Part No.A8010162885MAH)

Vaico – Valve Cover (Part No.A3160379615VCO)

Elring – Cylinder Head Gasket (Part No.A8010162885ELR)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-33070-03)

APA/URO Parts – Valve Cover (Part No.A3160379615APA)

Rein – Valve Cover Kit (Part No.VCK0106)

Dorman – Valve Cover Kit (Part No.264-912)

URO Parts – VALVE COVER (Part No.11127512839)

Felpro – Cylinder Head Gasket Set (Part No.HS 26245 PT)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-33070-10)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-33070-00)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26245 PT)

Elring – Cylinder Head Bolt Set (Part No.A3031138850ELR)

Mahle – Cyl. Head Bolt Set (Part No.A30311159528MAH)

Ajusa – Cylinder Head Bolt Set (Part No.81027600)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32002-02)

AE – Federal Mogul Exhaust Valve (Part No.A4050248410AE)

Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32101-01)

CRP – Valve Guide (Part No.A3060435500CRP)

Victor Reinz – Engine Valve Cover Grommet Set (Part No.15-33388-01)

APA/URO Parts – Valve Cover Nut (Part No.A3110336921APA)

Febi – Valve Cover Mount (Part No.A316472159FEB)

KS – Valve Keeper (Part No.A407084736KS)

MTC – Valve Cover Washer (Part No.A3162946353MTC)

National – Shaft Repair Sleeve (Part No.99147)

Carquest Premium – Camshaft Sensor (Part No.CSC1185)

Carquest Premium – Camshaft Sensor (Part No.CSC1222)

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

Original Equipment – Camshaft Position Sensor (Part No.A4015151787OEA)

Vemo – Q+ OE Quality Camshaft Position Sensor (Part No.A4015151788VMO)

Delphi – Engine Camshaft Position Sensor (Part No.SS10814)

Original Equipment – Camshaft Position Se (Part No.A4015272645OEA)

Vemo – Q+ OE Quality Camshaft Position Sensor (Part No.A4015272645VMO)

Original Equipment – Camshaft Position Sensor, With O-ring (Part No.A4015151788OEA)

Dorman – Magnetic Camshaft Position Sensor (Part No.907-702)