2005 BMW 330i Drivetrains
More 2005 BMW 330i Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 BMW 330i, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 BMW 330i Drivetrains
Febi – Axle Shaft Nut (Part No.K4030118037FEB)
from
$13.82
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.39
DIFFERENTIAL DRAIN P
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020116405FEB)
from
$98.22
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Meyle – Subframe Bushing (Part No.L1020183850MEY)
from
$42.75
Subframe Bushing
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.HM89449)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Vaico – Q+ OE Quality Driveshaft Support with Bearing (Part No.K1030448485VCO)
from
$158.09
The Vaico Driveshaft Support with Bearing is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Made in Germany OE Quality
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications Q+ The Seal of Excellence
- ALWAYS OEM QUALITY
- ALWAYS MADE IN GERMANY
Corteco – Pinion Seal (Part No.J7010481273CFW)
from
$12.58
Pinion Seal
Driveworks – Auto Transmission Extension Housing Seal (Rear Seal) (Part No.S-710140)
Driveworks – Camshaft Seal (Part No.S-99139)
Rein – CV Boot Kit (Part No.BKN0172)
from
$15.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
FAG – Wheel Hub Assembly (Part No.K7001236769FAG)
from
$170.99
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
- Lubricated with specially developed greases
- Optimized sealing systems
Rein – Drive Shaft Mount Assembly (Part No.AVS0054R)
from
$42.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- All bearings included are produced by an OE manufacturer ensuring the highest quality and performance
- All driveshaft mount assemblies come with the bearing pre-installed ensuring proper bearing alignment, reducing installation time
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
National – Bearings (Part No.LM503349A)
from
$22.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Rein – Differential Plug (Part No.HWP0065)
from
$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.
Product Features:
See More
Product Features:
- Designed to tight tolerances to ensure proper sealing.
- Rein Oil Drain Plugs are coated for high corrosion resistance.
- Designed and constructed to strict engineering quality standards.
- Includes copper sealing gasket.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.79
Product Features:
See More
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
- Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
- Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.42
Differential Side Cover Seal, 90 x 44 x 10
Dorman – Rear Drive Shaft: Adjustable (Part No.946-973)
from
$1141.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Adjustable (Part No.976-346)
from
$1038.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
GKN Drivetech – Axle Assembly, New (Part No.K4000299542GKN)
from
$324.22
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
GKN Drivetech – Axle Assembly, New (Part No.K4000240520GKN)
from
$379.02
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Timken – Input Shaft Seal (Part No.J1156280261TIM)
from
$12.93
Input Shaft Seal
Driveworks – Oil Seal (Part No.S-473677)
from
$3.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Corteco – Input Shaft Seal (Part No.J1156280243CFW)
from
$18.55
Input Shaft Seal
National – Multi Purpose Seal (Part No.224010)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Popular 2005 BMW 330i Drivetrains Categories
2005 BMW 330i Drivetrains
You count on your 2005 BMW 330i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 40 Drivetrains ranging in price from $4.29 to $1,141.99, you’re sure to find everything you need for your 2005 BMW 330i.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Royal Purple, and National. 2005 BMW 330i Drivetrains start as low as $4.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 494 extensive product reviews on 2005 BMW 330i Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Shaft Repair Sleeve with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 BMW 330i below to get started!
Top-Rated Drivetrains Brands For Your 2005 BMW 330i
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 BMW 330i running right for years to come. In our inventory you’ll find brands like Valvoline, Royal Purple, National, and even more.
Popular Royal Purple Drivetrains
You’ll find popular Royal Purple brand products across Differentials. All are waiting to get your 2005 BMW 330i back on the road. Some of the top-rated Royal Purple products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2005 BMW 330i, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2005 BMW 330i Drivetrains
What are the most purchased Drivetrains for the 2005 BMW 330i?
Out of 40 Drivetrains for the 2005 BMW 330i, the most popular in our inventory are:
What are the top-rated 2005 BMW 330i Drivetrains?
Top-rated Drivetrains for your 2005 BMW 330i based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
from
$155.99
(2)
CV Axle Shaft Assembly
“NCV27921 CV Axle Assembly for a 2005 BMW 330Ci Rear Right Did Not Come Fully Assembled. You might as well rebuild your own.”
