2005 BMW 325xi Drivetrains
Find Your Specific 2005 BMW 325xi Drivetrains
Below you will find various in-demand BMW Drivetrains, components and accessories for your 2005 325xi. Advance Auto Parts has popular 325xi parts like CV Axles and Joints, Transfer Cases, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other 325xi model years including
2001,
2002,
2003,
2004,
2006 and more. Select a category of 2005 BMW 325xi Drivetrains below and start saving instantly.
Popular 2005 BMW 325xi Drivetrains Categories
Essential Drivetrains for 2005 BMW 325xis
Beck/Arnley – Cu Joint Boot Kit (Part No.103-3034)
from
$24.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
SKF – Output Shaft Seal (Part No.J1157254243SKF)
from
$28.01
Output Shaft Seal
Dorman – Driveshaft Flex Coupler (Part No.935-187)
from
$164.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-985)
from
$49.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.HM88542)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Camshaft Seal (Part No.S-99139)
Dorman – Front Drive Shaft (Part No.938-296)
from
$532.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Multi Purpose Bearing (Part No.HB2780-20)
from
$144.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.00
DIFFERENTIAL DRAIN P
Corteco – Input Shaft Seal (Part No.J1156280243CFW)
from
$23.13
Input Shaft Seal
Corteco – Input Shaft Seal (Part No.J1156254228CFW)
from
$20.29
Input Shaft Seal
GKN Drivetech – Axle Assembly (Part No.K4000240531GKN)
from
$621.12
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV27916)
from
$102.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Febi – Axle Shaft Nut (Part No.K4030133883FEB)
from
$13.23
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
FAG US – BEARING (Part No.6006-2RSR)
from
$15.49
BEARING
Vaico – Q+ OE Quality Driveshaft Support with Bearing (Part No.K1030448485VCO)
from
$160.14
The Vaico Driveshaft Support with Bearing is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Made in Germany OE Quality
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications Q+ The Seal of Excellence
- ALWAYS OEM QUALITY
- ALWAYS MADE IN GERMANY
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.82
Differential Side Cover Seal, 90 x 44 x 10
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Vaico – Subframe Bushing (Part No.L1020238130VCO)
from
$18.53
Subframe Bushing
Lemfoerder – Subframe Bushing (Part No.L1020238130LEM)
from
$19.57
The Lemfoerder subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
AST – Differential Mount (Part No.J7070574684AST)
from
$100.31
Differential Mount
Meyle – Subframe Bushing (Part No.L1020183850MEY)
from
$42.58
Subframe Bushing
Febi – CV Joint Boot Kit (Part No.K6010292557FEB)
from
$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
EMPI – RE CV Joint Boot Kit (Part No.K6010182701EMP)
from
$31.88
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Vaico – CV Joint Boot Kit (Part No.K6010187213VCO)
from
$29.90
With Clamps and Grease The Vaico CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Joint Boot Kit (Part No.K6010271458RIN)
from
$50.37
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Upgrade your 2005 BMW 325xi with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2005 BMW 325xi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Drivetrains are key to keeping your 325xi functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Drivetrains for the 2005 BMW 325xi, designed to meet your needs without breaking the bank.
From
CV Axles and Joint
replacements to
Transfer Cases
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2005 BMW 325xi at great prices.
Our Drivetrains inventory for this model
ranges from just $4.79 to $1,175.92, with
an average price of $97.03.
Our 58 Drivetrains in stock come from 24 trusted brands, so you’re sure to find the right part for your 2005 BMW 325xi without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 BMW 325xi, we stock popular OEM and aftermarket Drivetrains from top names
like Royal Purple, Valvoline, National, and more.
Royal Purple Drivetrains
start at just $12.99 and boast an impressive 5 stars average rating from customers.
Valvoline and National also bring quality to the table, with Drivetrains available starting at $11.49, and at an average 5 stars rating.
With 180 customer reviews and counting, our 2005 BMW 325xi Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2005 BMW 325xi is always ready to roll. We’re committed to providing you with everything you need to keep your 325xi in top shape, all in one place.
Start shopping confidently below for your 2005 BMW 325xi!
Best-Selling CV Axles and Joints for 2005 BMW 325xis
Enhance the driving experience in your BMW with 12 quality CV Axles and Joint components, starting at $4.82.
Rein – CV Boot Kit (Part No.BKN0060R)
from
$16.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Worldpac – DIFF. SIDE COVER SEA (Part No.J70414187329REI)
from
$52.28
DIFF. SIDE COVER SEA
Rein – CV Joint Boot Kit (Part No.K6010271458RIN)
from
$50.37
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Boot Kit (Part No.BKN0100R)
from
$39.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Febi – CV Joint Boot Kit (Part No.K6010187181FEB)
from
$39.02
The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Boot Kit (Part No.BKN0061R)
from
$34.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
GKN Drivetech – CV Boot Kit (Part No.K6010177992GKN)
from
$34.19
CV Boot Kit
Autopart International Inc – CV Boot Kit (Part No.K60102026265API)
from
$28.74
CV Boot Kit
Beck/Arnley – Cu Joint Boot Kit (Part No.103-3034)
from
$24.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Rein – CV Joint Boot Kit (Part No.K6010177992RIN)
from
$23.28
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.82
Differential Side Cover Seal, 90 x 44 x 10
Ajusa – Diff. Side Cover O-R (Part No.J7042433122AJU)
from
$4.82
Diff. Side Cover O-R
Most Popular 2005 BMW 325xi Transfer Cases
Customize your BMW with 6 Transfer Cases products
like Transfer Case Output Shaft Seals and
Input Shaft Seals, all
priced under $50.77.
National – Multi Purpose Seal (Part No.223050)
from
$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Timken – Input Shaft Seal (Part No.J1156280261TIM)
from
$16.95
Input Shaft Seal
Driveworks – Oil Seal (Part No.S-223802)
from
$6.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Original Equipment – Output Shaft Seal (Part No.J1157254259OEA)
from
$50.77
Output Shaft Seal
SKF – Output Shaft Seal (Part No.J1157254243SKF)
from
$28.01
Output Shaft Seal
National – Multi Purpose Seal (Part No.710746)
from
$23.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Top Picks for 2005 BMW 325xi Differentials
Upgrade BMW 325xis with top-quality Differentials parts, including 21 OEM and aftermarket selections for your 2005 model.
Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)
from
$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.
Product Features:
See More
Product Features:
- Better Wear Protection
- Increased Protection against Low Speed Pre-Ignition
- Increased Fuel Efficiency
- Better Protection for Vehicle Exhaust Emissions Equipment
- Improved Compatibility with Fuels Containing Ethanol
- Superior Corrosion Protection
- Made in USA
Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)
from
$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)
from
$25.99
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.
Product Features:
See More
Product Features:
- Maximizes horsepower
- Extends gear and bearing life
- Reduces operating temperature
- Lower coefficient of friction
- Superior corrosion protection
- Separates rapidly from water
- For use with open, limited-slip and locking differential
- Contains limited-slip friction modifier
- Made in USA
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)
from
$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
National – Bearings (Part No.HM89449)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)
from
$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.
Product Features:
See More
Product Features:
- Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
- Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
- Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
- Reduces friction and metal-to-metal contact for peak engine performance
- Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
- High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
National – Bearings (Part No.HM88542)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM89410)
from
$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Vaico – Subframe Bushing (Part No.L1020238130VCO)
from
$18.53
Subframe Bushing
AST – Differential Mount (Part No.J7070574684AST)
from
$100.31
Differential Mount
Meyle – Subframe Bushing (Part No.L1020183850MEY)
from
$42.58
Subframe Bushing
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
Driveworks – Camshaft Seal (Part No.S-99139)
Lemfoerder – Subframe Bushing (Part No.L1020238130LEM)
from
$19.57
The Lemfoerder subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Driveworks – Tapered Roller Bearing (Part No.S-HM-88542)
Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)
Corteco – Pinion Seal (Part No.J7010481192CFW)
from
$8.45
Pinion Seal
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.00
DIFFERENTIAL DRAIN P
Driveworks – Differential Seal (Part No.S-473823)
In-Demand Drive Shafts and Axles for 2005 BMW 325xis
Select from 19 premium Drive Shafts and Axles parts for your 2005 BMW 325xi, with prices ranging from $13.03 to $1,175.92.
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV27523)
from
$116.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV27522)
from
$116.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Bearings (Part No.106-CC)
from
$41.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-985)
from
$49.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$13.99
Drive Shaft-Ctr Support Bearng
Dorman – Driveshaft (Part No.K1000311692DOR)
from
$1175.92
A highly cost-effective, innovative repair solution, Dorman’s Driveshaft Assembly is engineered with a serviceable universal joint. When the u-joint fails, as is common with normal use, simply replace the u-joint – rather than replacing the entire assembly.
Product Features:
See More
Product Features:
- Dorman-engineered from 100% new materials and rigorously tested for long-lasting durability
- Coated for extended resistance to rust and corrosion
- Dorman Drop Ship Drive Shafts are made, balanced and tested in the USA
- Direct replacement for a proper fit
Worldpac – AXLE ASSEMBLY (Part No.K40001703378GKN)
from
$996.21
AXLE ASSEMBLY
Dorman – Front Drive Shaft (Part No.938-296)
from
$532.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
GKN Drivetech – Axle Assembly, New (Part No.K4000236568GKN)
from
$522.53
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-7000)
from
$359.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Driveshaft Center Support Bearing (Part No.934-006)
from
$274.99
This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles.
- Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Driveshaft Flex Coupler (Part No.935-187)
from
$164.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Febi – Driveshaft Flex Join (Part No.K1020119041FEB)
from
$110.33
Driveshaft Flex Join
Autopart International Inc – Driveshaft Support B (Part No.K10401983512API)
from
$52.04
Driveshaft Support B
FAG US – BEARING (Part No.6006-2RSR)
from
$15.49
BEARING
Febi – Axle Shaft Nut (Part No.K4030133883FEB)
from
$13.23
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Corteco – Driveshaft Bushing (Part No.K1050292291CFW)
from
$13.03
The Corteco Driveshaft Bushing is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Top-Rated Drivetrains Brands For Your 2005 BMW 325xi
Shop for the best-rated brands offering Drivetrains and other products for your 2005 BMW 325xis. Below you’ll find some of our best rated Drivetrains from Royal Purple, Valvoline, and National, and more. Drivetrains from these brands that fit a 2005 325xi start at just $11.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Royal Purple 2005 BMW 325xi Drivetrains
When it comes to maintaining or upgrading your 2005 BMW 325xi, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2005 BMW 325xi. With over 3 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $17.32. Plus, with over 139 customer reviews and an average rating of 5 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$25.99
$25.99
(57)
MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT
“Good Quality and OK price!”
Popular Valvoline 2005 BMW 325xi Drivetrains
Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 2005 BMW 325xi owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2005 325xi, Advance Auto Parts carries a full inventory of 1 Valvoline Drivetrains. Plus you will be keeping your BMW in peak condition while saving money because prices on these Valvoline Drivetrains range up to $35.99, plus, with more than 17 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
FAQs for 2005 BMW 325xi Drivetrains
Which Drivetrains are best-sellers for 2005 BMW 325xis?
Out of 58 Drivetrains that fit 2005 BMW 325xis, the following parts are the top sellers:
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- CV Axle Shaft Assembly (20871204) – $116.99
- HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (11946678) – $12.99
What’s the price range for 2005 BMW 325xi Drivetrains?
Drivetrain prices for the 2005 BMW 325xi start at $4.79 and go up to $1,175.92 for the most premium parts.
What’s the average price of a Drivetrain for a 2005 BMW 325xi?
The average price for Drivetrains for the 2005 BMW 325xi is $97.03. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other BMW 325xi model years?
What are the cheapest Drivetrains for my 2005 BMW 325xi?
The cheapest 2005 BMW 325xi Drivetrains we carry in stock are:
- Differential Seal (11494079) – $4.79
- Diff. Side Cover O-R (11967167) – $4.82
- Tapered Roller Bearing (10733422) – $4.99
- Oil Seal (15440111) – $6.79
- DIFFERENTIAL DRAIN P (11260967) – $7.00
What are the top-rated Drivetrains that fit the 2005 BMW 325xi?
Out of 180 reviews by customers, our 2005 BMW 325xi Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2005 BMW 325xi and their top-rated products:
- Differentials
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Shaft Repair Sleeve (18445088) – $39.99
- MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (7070083) – $25.99
- Transfer Cases
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Shaft Repair Sleeve (18445088) – $39.99
- MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (7070083) – $25.99
- Drive Shafts and Axles
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Shaft Repair Sleeve (18445088) – $39.99
- MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (7070083) – $25.99
What types of Drivetrains do you sell for my 2005 BMW 325xi?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2005 BMW 325xi:
Can I get help with 2005 BMW 325xi Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Drivetrains and more.
What is your return policy for BMW 325xi Drivetrains?
Advance Auto Parts keeps returns simple. For new BMW 325xi Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
