2005 Audi TT Wheels and Tires

Essential 2005 Audi TT Wheels and Tires

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-15)

Tapered Cone/Cup Wheel Bearing Set

from

$10.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513253)

Hub and Bearing Assembly

from

$221.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510003)

Wheel Bearing: Direct Fit, 1 Piece

from

$40.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512012)

Hub and Bearing Assembly

from

$143.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Application specific design
See More

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-246645)

Hub Assembly with Wheel Bearing

from

$206.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:
  • Engineered for OE fit, form and function
  • Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
  • Roll-form bearing design applies exact preload for increased durability (where applicable)
  • Bearings and seals are engineered to the requirements of each specific vehicle application
  • Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
  • Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
See More

Driveworks – Wheel Hub Assembly (Part No.NT512012)

Wheel Hub Assembly

from

$66.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.

Product Features:
  • Constructed from quality materials for extended durability
  • Integral raceway provides proper clearance between the ball and bearing riding surfaces
  • Precision-matched components deliver smooth and quiet operation
  • Manufactured to strict engineering quality standards
  • Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
  • Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
  • Brand may vary by location
See More

Driveworks – Hub & Bearing Assembly (Part No.NT512319)

Hub & Bearing Assembly

from

$150.99
Driveworks hub bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. The hub bearing assembly is designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Drivework’s hub bearing assembly. The hub bearing comes complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.

Product Features:
  • Constructed from high-quality materials for extended durability
  • Integral raceway provides proper clearance between the ball and bearing riding surfaces
  • Ensures proper function and quiet operation
  • Precision-matched components deliver smooth and quiet operation
  • Manufactured to strict engineering quality standards
  • Brand may vary by location
See More

McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)

Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • The bolt stem has a dacromet coating to meet O.E.M. standards.
  • For use with steel or aluminum wheels with a ball-shaped seat.
See More

McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)

Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • The bolt stem has a dacromet coating to meet O.E.M. standards.
  • For use with steel or aluminum wheels with a ball-shaped seat.
See More

Meyle – Wheel Bearing Dust C (Part No.K7005384018MEY)

Wheel Bearing Dust C

from

$5.34
The Meyle Wheel Bearing Dust Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)

REDI-Sensor Metal Clamp-in Stem 315 MHz -- 1 Sensor

from

$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:
  • Metal clamp-in stem.
  • Works with most major TPMS Scan tools
  • Reduces SKUs
  • OE Designed and Validated
  • Advance anodization of valve stems and hex nuts
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)

Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz

from

$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:
  • 315 MHz TPMS Universal with rubber valve
  • Programmable – Only take 3 seconds to configure to specific application
  • Always up-to-date with the new programming function via the TPMS diagnostic tool
  • Covers multiple applications with one OE equivalent sensor
  • Reprogrammable and Copy Clone Capable
  • Have WAL technology for locating tire positon
  • Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.

from

$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:
  • Includes 4 Rubber Press-in Valve Stems
  • Compatible with Autel 1-Sensors
  • Compatible with Autel 315MHz & 433MHz MX-Sensors
  • Warranty on Material and Workmanship
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem

from

$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Box of 4 Metal Press-in Valve Stems for 1-Sensor

from

$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:
  • Four Metal Valve Stems
  • Press-in interchangeable metal valve stem
  • Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
  • Press release valve design allows easy installation without a tool for sensor head fitting
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

MX-Sensor 1-Sensor (Rubber)

from

$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • 100% ID clone-able with no relearn required
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece

from

$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)

Adjustable Angle 1-Sensor Rubber

from

$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Maximum Signal Strength, Battery Reliability.
  • 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
  • Combined Frequency – 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99 Percent of OE Sensors
  • Meets SAE Standards J1205 and J1206
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece

from

$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Sensor must be programmed to specifi Y/M/M vehicle
  • Compatible with most programming tools
  • Make sure that your TPMS programming tool is updated to it’s latest version
  • Combines 314.9, 315 & 433 MHz application into one sensor
  • Future proofed to support new and pending OE system technologies
  • Optimizes inventory levels and returns
  • Reduces overal cost and increases speed of service
  • Use service kit 20018 to replace the rubber valve assembly
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Febi – Lug Bolt (Part No.O8020805557FEB)

Lug Bolt

from

$12.77
Lug Bolt

Febi – Lug Bolt: Engineered for Optimal Wheel Attachment and Maximum Durability (Part No.O8020408740FEB)

Lug Bolt: Engineered for Optimal Wheel Attachment and Maximum Durability

from

$6.76
Lug Bolt: Engineered for Optimal Wheel Attachment and Maximum Durability

Dorman – Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Silver (Sold by each) (Part No.610-467)

Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Silver (Sold by each)

from

$5.49
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:
  • Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
  • Durable construction – made of quality materials for safe, reliable service
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dorman – Pik-a-Nut – Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack (Part No.98555.1)

Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack

from

$4.29
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:
  • Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
  • Durable construction – made of quality materials for safe, reliable service
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (Part No.610-318)

M14-1.50 Wheel Bolt - 17mm Hex, 26mm Thread Length

from

$3.49
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:
  • Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
  • Durable construction – made of quality materials for safe, reliable service
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Rein – Wheel Bolt (Part No.HWB0011)

Wheel Bolt

from

$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.

Product Features:
  • Wheel bolt is produced by an OE manufacturer
  • Packaged in convenient quantities.
  • Direct replacement for correct fitments
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

2005 Audi TT Wheels and Tires

You count on your 2005 Audi TT to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 17 Wheels and Tires ranging in price from $5.34 to $361.99, you’re sure to find everything you need for your 2005 Audi TT.

Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 9 different brands like Schrader, Driveworks, and National. 2005 Audi TT Wheels and Tires start as low as $5.34!

One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 114 extensive product reviews on 2005 Audi TT Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Bearing: Direct Fit, 1 Piece with 3.9 stars.

Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2005 Audi TT below to get started!

Top-Rated Wheels and Tires Brands For Your 2005 Audi TT

Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Audi TT running right for years to come. In our inventory you’ll find brands like Schrader, Driveworks, National, and even more.

Popular MOOG Hub Assemblies Wheels and Tires

You’ll find popular MOOG Hub Assemblies brand products across Wheel Bearings. All are waiting to get your 2005 Audi TT back on the road. Some of the top-rated MOOG Hub Assemblies products in these categories are:
Hub and Bearing Assembly
from $143.99
(1)
Hub and Bearing Assembly
Rear Wheel Bearings

FAQs for 2005 Audi TT Wheels and Tires

What are the most purchased Wheels and Tires for the 2005 Audi TT?

Out of 17 Wheels and Tires for the 2005 Audi TT, the most popular in our inventory are:
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
from $51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
Wheel Bearing: Direct Fit, 1 Piece
from $40.99
(19)
Wheel Bearing: Direct Fit, 1 Piece
Front Wheel Bearings
Wheel Hub Assembly
from $66.99
(11)
Wheel Hub Assembly
Rear Wheel Bearings

What are the top-rated 2005 Audi TT Wheels and Tires?

Top-rated Wheels and Tires for your 2005 Audi TT based on customer reviews/ratings are:
Wheel Bearing: Direct Fit, 1 Piece
from $71.99
(13)
Wheel Bearing: Direct Fit, 1 Piece
“These bearings are not the easiest to replace. It is important how the bearing is supported when pressing in the hub and tightening the cv shaft nut t”