2005 Audi S4 Body Parts

Below you will find various in-demand Audi Body Parts, components and accessories for your 2005 S4. Advance Auto Parts has popular S4 parts like Vehicle Doors, Vehicle Hoods, Vehicle Mirrors and more. You’ll also find aftermarket and OEM Body Parts for other S4 model years including 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021 and more. Select a category of 2005 Audi S4 Body Parts below and start saving instantly.

Popular 2005 Audi S4 Body Parts Categories

Fender Liner Retainers

Power Window Switches

Mirror Replacement Glass

Door Interior Trim Panel Retainers

Convertible Top Hydraulic Fluids

Essential Body Parts for 2005 Audi S4s

from

$2.00

Screw

from

$85.99

New Standard Replacement Front Bumper Lower Spoiler, For Sedan/Wagon Models, Prime, For Generation 2 2005 Models Only [With Air Slots On Top Edge]

Product Features:

For Sedan/Wagon Models, Prime, For Generation 2 2005 Models Only [With Air Slots On Top Edge], Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.75

Vaico’s superior OE Quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$9.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$33.60

CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

from

$71.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$65.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$209.99

Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$59.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$54.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$104.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$359.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$385.99

Door Window Switch

from

$33.93

Window Switch

from

$36.99

New Standard Replacement Passenger Side Fender Liner, Sedan And Wagon

Product Features:

Sedan And Wagon, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$599.99

New Economy Replacement Hood Panel, Generation 3

Product Features:

Generation 3, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$706.99

New CAPA Certified Premium Replacement Hood Panel, Made Of High Strength Steel, Fits With And Without The S-Line Package

Product Features:

Made Of High Strength Steel, Fits With And Without The S-Line Package
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.19

Trim Fastener, Black

from

$2.36

Trim Fastener

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$2.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$57.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$25.79

ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:

Exact replacement, engineered for your application.
Rust-resistant piston rod extends product life.
Easy lifting, reduced closing effort.
Consistent lifting force through 50,000 cycles.

from

$39.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required

from

$108.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Silver/Gray With Chrome Frame, A4/S4 Without S-Line Package. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Silver/Gray With Chrome Frame, A4/S4 Without S-Line Package, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Upgrade your 2005 Audi S4 with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2005 Audi S4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Body Parts are key to keeping your S4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Body Parts for the 2005 Audi S4, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2005 Audi S4 at great prices. Our Body Parts inventory for this model ranges from just $2.00 to $599.99, with an average price of $88.33. Our 52 Body Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2005 Audi S4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2005 Audi S4, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, and more. StrongArm Body Parts start at just $57.99 and boast an impressive 5 stars average rating from customers. With 8 customer reviews and counting, our 2005 Audi S4 Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2005 Audi S4 is always ready to roll. We’re committed to providing you with everything you need to keep your S4 in top shape, all in one place. Start shopping confidently below for your 2005 Audi S4!

Best-Selling Vehicle Doors for 2005 Audi S4s

Enhance the driving experience in your Audi with 2 quality Vehicle Door components, starting at $2.36.

show more show less

from

$289.77

Door Latch Assembly

from

$2.36

Trim Fastener

Most Popular 2005 Audi S4 Vehicle Hoods

Customize your Audi with 13 Vehicle Hoods products like Lift Supports, Hood Insulation Pads, and Hood Panels, all priced under $599.99.

show more show less

from

$57.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$29.44

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

from

$599.99

New Economy Replacement Hood Panel, Generation 3

Product Features:

Generation 3, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$68.43

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

from

$59.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$41.24

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

from

$37.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$29.34

Hatch Strut

from

$25.76

Exact replacement, engineered for your application.
Rust-resistant piston rod extends product life.
Easy lifting, reduced closing effort.
Consistent lifting force through 50,000 cycles.

from

$22.55

Hood Strut

from

$2.79

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Top Picks for 2005 Audi S4 Vehicle Mirrors

Upgrade Audi S4s with top-quality Vehicle Mirrors parts, including 9 OEM and aftermarket selections for your 2005 model.

show more show less

from

$97.99

Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
Original equipment quality, fit, and function
Step-by-step instructions for easy installation
Heated

from

$209.99

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$203.99

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$59.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$59.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$34.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

In-Demand Vehicle Windows for 2005 Audi S4s

Select from 8 premium Vehicle Windows parts for your 2005 Audi S4, with prices ranging from $55.57 to $110.99.

show more show less

from

$110.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$104.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$71.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$75.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$106.81

Without Electric Motor The WORLD SOURCEONE Power Window line includes window regulators and motor-regulator assemblies that are competitively priced against remanufactured units and do not require a core trade-in. All WSO window regulators and regulator-motor assemblies come complete and ready for easy installation. The OE quality means increased installer confidence with fewer comebacks. Coverage includes European, and Asian passenger cars and light trucks.

Product Features:

Superior, reliable performance compared to competitive products
Identical to OE for simplified installation and no comebacks
Durable construction including long life motors, gears, cables and case
Factory original equipment connectors
No additional time consuming steps needed for installation
Vehicle specific fit and function
Manufactured in ISO Certified facilities

from

$91.16

Window Regulator

from

$72.83

Window Regulator

from

$55.57

Window Regulator

Most Sold 2005 Audi S4 Bodies and Fender Parts

Explore our best-selling Audi parts for the 2005 S4 among 8 OEM and aftermarket options starting from $2.00.

show more show less

from

$13.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair

from

$85.99

New Standard Replacement Front Bumper Lower Spoiler, For Sedan/Wagon Models, Prime, For Generation 2 2005 Models Only [With Air Slots On Top Edge]

Product Features:

For Sedan/Wagon Models, Prime, For Generation 2 2005 Models Only [With Air Slots On Top Edge], Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$33.86

Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:

Made from premium quality cellular polyurethane
The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
KYB Bump Stop Kits suit a variety of vehicle applications
KYB Bump Stop Kits perfectly compliment KYB Struts

from

$23.75

Vaico’s superior OE Quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$22.47

Vaico’s superior OE Quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality Q+ The Seal of Excellence
ALWAYS OEM QUALITY
ALWAYS MADE IN GERMANY

from

$20.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.17

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality

from

$2.00

Screw

Top-Rated Body Parts Brands For Your 2005 Audi S4

Shop for the best-rated brands offering Body Parts and other products for your 2005 Audi S4s. Below you’ll find some of our best rated Body Parts from StrongArm, and more. Body Parts from these brands that fit a 2005 S4 start at just $57.99 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2005 Audi S4 Body Parts

When it comes to maintaining or upgrading your 2005 Audi S4, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2005 Audi S4. With over 2 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $57.99, with an average price of just $58.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$59.99

This product is not rated

Liftgate Lift Support: 19.68" Ext Length, 7.5" Travel, 125 Lbs of Force, 1 Pk

“”

from
$57.99

(1)

Hood Lift Support: 28.03" Ext Length, 11.75" Travel, 74 Lbs of Force, 1 Pk

“Easy to install”

FAQs for 2005 Audi S4 Body Parts

Which Body Parts are best-sellers for 2005 Audi S4s?

Out of 52 Body Parts that fit 2005 Audi S4s, the following parts are the top sellers:

Audi, VW Hood Insulation Retainer (11910796) – $4.29
Window Regulator: Power, 1 Pack (10193378) – $110.99
Hood Lift Support: 28.03" Ext Length, 11.75" Travel, 74 Lbs of Force, 1 Pk (10169454) – $57.99

What’s the price range for 2005 Audi S4 Body Parts?

Body Part prices for the 2005 Audi S4 start at $2.00 and go up to $599.99 for the most premium parts.

What’s the average price of a Body Part for a 2005 Audi S4?

The average price for Body Parts for the 2005 Audi S4 is $88.33. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Audi S4 model years?

Yes, we currently carry Body Parts for 24 model years of Audi S4s between 1992 and 2023. Body Parts are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Body Parts for my 2005 Audi S4?

The cheapest 2005 Audi S4 Body Parts we carry in stock are:

Screw (11916369) – $2.00
Trim Fastener (11192073) – $2.36
Hood Insulation Retainer Clip (sold by each) (11224098) – $2.79
Audi, VW Hood Insulation Retainer (11910796) – $4.29
Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In (11077165) – $4.29

What are the top-rated Body Parts that fit the 2005 Audi S4?

Out of 8 reviews by customers, our 2005 Audi S4 Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2005 Audi S4 and their top-rated products:

Vehicle Hoods
- Hood Lift Support: 28.03" Ext Length, 11.75" Travel, 74 Lbs of Force, 1 Pk (10169454) – $57.99

What types of Body Parts do you sell for my 2005 Audi S4?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2005 Audi S4:

Can I get help with 2005 Audi S4 Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Body Parts and more.

What is your return policy for Audi S4 Body Parts?

Advance Auto Parts keeps returns simple. For new Audi S4 Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2005 Audi S4 Body Parts

Vaico – Screw (Part No.Y2003462058VCO)

KAI – Front Bumper Lower Spoiler, Sedan/Wagon Model, Primed/Paint To Match Finish (Part No.AU1095103)

Vaico – Q+ OE Quality Shock Bump Stop (Part No.L4041230539VCO)

Rein – Suspension Bump Stop (Part No.AVZ0166)

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-494)

Dorman – Window Regulator: Power, 1 Pack (Part No.740-493)

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56827)

Burco – Heated Side View Mirror Replacement (Part No.4055H)

Burco – Side View Replacement Mirror (Part No.5151)

Burco – Door Mirror Replacement Glass (Part No.6141HRSG)

Dorman – Integrated Door Lock Actuator – Front Right (Part No.931-114)

Carquest Premium – Door Window Switch (Part No.WSA3542)

Vemo – Window Switch (Part No.O306055308VMO)

KAI – Fender Liner (Part No.AU1249128)

KAI – Font Passenger Side Fender Liner, Made Of PP Plastic (Part No.AU1251106)

KAI – Hood Panel (Part No.AU1230111V)

KAI – Hood Panel (Part No.AU1230116PP)

Vaico – Trim Fastener, Black (Part No.O6072462069VCO)

Vaico – Trim Fastener (Part No.O6072462068VCO)

Dorman – Audi, VW Hood Insulation Retainer (Part No.963-639D)

Dorman – Hood Insulation Retainer Clip (sold by each) (Part No.700-087)

StrongArm – Hood Lift Support: 28.03" Ext Length, 11.75" Travel, 74 Lbs of Force, 1 Pk (Part No.B6444)

International Suspension Group – International Suspension Group Trunk Strut (Part No.O206486119ISG)

StrongArm – Hood Lift Support: 30.00" Ext Length, 0 Travel, 0 Lbs of Force, 1 Pk (Part No.B7150)

KAI – New Standard Replacement Grille, Silver/Gray With Chrome Frame, A4/S4 Without S-Line Package (Part No.AU1200112)

APA/URO Parts – Door Latch Assembly (Part No.O3027423497APA)

Vaico – Trim Fastener (Part No.O6072462068VCO)

StrongArm – Hood Lift Support: 28.03" Ext Length, 11.75" Travel, 74 Lbs of Force, 1 Pk (Part No.B6444)

Dorman – Audi, VW Hood Insulation Retainer (Part No.963-639D)

Dorman – Hood Insul Rtnr Head Dia 0.99 X 0.785 In Shank Lng 0.572 In Hole Dia 0.45 In (Part No.963-639)

Stabilus – Gas Charged Trunk Strut (Part No.O2064137516STB)

KAI – Hood Panel (Part No.AU1230111V)

Stabilus – Gas Charged Hood Strut (Part No.O2020137506STB)

StrongArm – Liftgate Lift Support: 19.68" Ext Length, 7.5" Travel, 125 Lbs of Force, 1 Pk (Part No.D6291)

Stabilus – Gas Charged Hood Strut (Part No.O2020137511STB)

Atlas Lift – Lift Support (Part No.LS11311)

Autopart International Inc – Hatch Strut (Part No.O20702213182API)

International Suspension Group – International Suspension Group Hood Strut (Part No.O2020137511ISG)

Autopart International Inc – Hood Strut (Part No.O20202208081API)

Dorman – Hood Insulation Retainer Clip (sold by each) (Part No.700-087)

K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.30279)

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56827)

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56826)

Burco – Side View Replacement Mirror (Part No.5136)

Burco – Heated Side View Mirror Replacement (Part No.4055H)

Burco – Side View Replacement Mirror (Part No.4055)

Burco – Side View Replacement Mirror (Part No.4072)

Burco – Side View Replacement Mirror (Part No.4056)

Burco – Side View Replacement Mirror (Part No.5135)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-637)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-638)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-639)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-640)

World Source One – Power Window Regulator (Part No.O3040295550WSO)

Autopart International Inc – Window Regulator (Part No.O30401947724API)

Autopart International Inc – Window Regulator (Part No.O30402058053API)

Autopart International Inc – Window Regulator (Part No.O30402074280API)

Rein – Suspension Bump Stop (Part No.AVZ0300P)

KAI – Front Bumper Lower Spoiler, Sedan/Wagon Model, Primed/Paint To Match Finish (Part No.AU1095103)

KYB – Shock Bellows Bump Stop Kit (Part No.L4030108063KYB)

Vaico – Q+ OE Quality Shock Bump Stop (Part No.L4041230539VCO)

Vaico – Q+ OE Quality Shock Bump Stop (Part No.L4041230256VCO)

KAI – Font Passenger Side Fender Liner, Made Of PP Plastic (Part No.AU1251106)

Febi – Febi Shock Bump Stop (Part No.L4041230539FEB)

Vaico – Screw (Part No.Y2003462058VCO)