2004 Volkswagen Passat Belts and Hoses

Essential Belts and Hoses for 2004 Volkswagen Passats

Vaico – Cooling Hose (Part No.G2021126987VCO)

Cooling Hose

from

$17.25
The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • Quick, easy mounting: quick connector from German production
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 26mm Width, Smooth (Part No.89522)

Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 26mm Width, Smooth

from

$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Aftermarket – Booster Vacuum Hose (Part No.N4020188725OEA)

Booster Vacuum Hose

from

$45.38
Booster Vacuum Hose

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)

Water Pipe O-Ring

from

$2.50
Water Pipe O-Ring

INA – INA Accessory Belt Idler Pulley (Part No.G6020391520INA)

INA Accessory Belt Idler Pulley

from

$66.47
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Gates – Premium Molded Heater Hose (Part No.18072)

Premium Molded Heater Hose

from

$18.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Hutchinson – Hutchinson Radiator Hose (Part No.G2000118506HUT)

Hutchinson Radiator Hose

from

$115.25
First-fit supplier to numerous automotive manufacturers, Hutchinson is today recognized as a leading world expert on engine cooling system hose solutions. Controlling design and manufacture, Hutchinson uses state-of-the-art technology due to its digital calculation capacity and its expert knowledge of fluid mechanics, and benefits from its significant mastery of plastic, silicone, metal and rubber materials that are used in these increasingly complex parts. Hutchinson became the market leader with easy and reliable solutions for manufacturers with extensive ranges of quick-release and click-on connections. In terms of automotive spare parts, Hutchinson offers access to first-fit parts for the replacement of radiator inlet and outlet hoses, parts used for the circulation of cooling liquid.

Product Features:
  • The lifespan of the hoses is close to that of the vehicle Manufacturer.
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100062495CON)

Multi Rib (Serpentine) Belt

from

$21.91
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dorman – Coolant Hose Connector (Part No.902-795)

Coolant Hose Connector

from

$17.49
This radiator coolant hose connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this radiator coolant hose connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Vaico – Q+ OE Quality Air Pump Hose (Part No.B6030450246VCO)

Q+ OE Quality Air Pump Hose

from

$146.03
The Vaico Air Pump Hose is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Made in Germany OE Quality
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications Q+ The Seal of Excellence
  • ALWAYS OEM QUALITY
  • ALWAYS MADE IN GERMANY
See More

Original Equipment – Air Pump Hose (Part No.B6030268071OEA)

Air Pump Hose

from

$70.04
Air Pump Hose

Gates – Micro-V« Serpentine Drive Belt (Part No.K060439)

Micro-V« Serpentine Drive Belt

from

$35.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Poly Rib Belt Serpentine Belt; 43.31 Long, 6 Rib Count (Part No.5060433)

Poly Rib Belt Serpentine Belt; 43.31 Long, 6 Rib Count

from

$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Serpentine Assy. Idler/Tensioner Pulley; Steel, 60mm Dia., 19mm Width, 4 Grooves (Part No.89072)

Serpentine Assy. Idler/Tensioner Pulley; Steel, 60mm Dia., 19mm Width, 4 Grooves

from

$46.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 78mm Dia., 25mm Width, Smooth (Part No.89071)

Serpentine Idler/Tensioner Pulley; Polymer, 78mm Dia., 25mm Width, Smooth

from

$34.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length

from

$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Gates – Premium Molded Coolant Hose (Part No.21942)

Premium Molded Coolant Hose

from

$17.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

INA – Accelerator Belt Tensioner Kit (Part No.G6004452080INA)

Accelerator Belt Tensioner Kit

from

$142.17
Accelerator Belt Tensioner Kit

Rein – Radiator Hose (Part No.CHR0142R)

Radiator Hose

from

$36.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Rein Radiator Hose (Part No.G200063493RIN)

Rein Radiator Hose

from

$184.36
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Expansion Tank Hose (Part No.G203084769RIN)

Expansion Tank Hose

from

$12.93
Expansion Tank Hose

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999348A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$109.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Volkswagen 2.5L applications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt), saving you time!
  • Installation instructions included
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999183A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$135.99
This Litens belt tensioner is manufactured by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured by INA for VW Diesel applications. The aftermarket part maintains the hydraulic spring/damper mechanism and the original lift features for ease of installation as well as a new installation bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic damping technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Polymer Pulley
  • Professional Mechanics will change this tensioner in about 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-386)

Automatic Belt Tensioner (Tensioner Only)

from

$62.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:
  • Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
  • Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Rein – Rein Radiator Hose (Part No.G2000445461RIN)

Rein Radiator Hose

from

$190.29
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Suncore – Shock Kit (Part No.2-12S257020-001)

Shock Kit

from

$76.99
Shock Kit

Rein – Radiator Hose (Part No.CHR0015R)

Radiator Hose

from

$47.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Upgrade your 2004 Volkswagen Passat with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2004 Volkswagen Passat, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Belts and Hoses are key to keeping your Passat functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Belts and Hoses for the 2004 Volkswagen Passat, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2004 Volkswagen Passat at great prices. Our Belts and Hoses inventory for this model ranges from just $1.38 to $231.99, with an average price of $49.91. Our 73 Belts and Hoses in stock come from 23 trusted brands, so you’re sure to find the right part for your 2004 Volkswagen Passat without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Volkswagen Passat, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $11.29 and boast an impressive 5 stars average rating from customers. With 549 customer reviews and counting, our 2004 Volkswagen Passat Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Volkswagen Passat is always ready to roll. We’re committed to providing you with everything you need to keep your Passat in top shape, all in one place. Start shopping confidently below for your 2004 Volkswagen Passat!

Best-Selling Belt Tensioners for 2004 Volkswagen Passats

Enhance the driving experience in your Volkswagen with 7 quality Belt Tensioner components, starting at $74.12.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.950440A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$79.99
Litens was the Original Equipment (O.E.) supplier of this VW/Audi tensioner and offers this “O.E. Exact”* part for the aftermarket. This “OE Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with a lift feature and a pin-locking devise to assist in belt removal and installation. Like the original part, the pulley is the European split steel design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Germany”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty European Split Steel Pulley Design
  • Professional Mechanics will change this tensioner in approx. 1 hour or less.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.950442A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$131.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement tensioner is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. This part is specifically designed for Audi / Volkswagen applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999183A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$135.99
This Litens belt tensioner is manufactured by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured by INA for VW Diesel applications. The aftermarket part maintains the hydraulic spring/damper mechanism and the original lift features for ease of installation as well as a new installation bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic damping technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Polymer Pulley
  • Professional Mechanics will change this tensioner in about 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

INA – INA Accessory Belt Tensioner (Part No.G600090649INA)

INA Accessory Belt Tensioner

from

$149.56
The INA Accessory Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • High tension spring assembly
  • Precision bearing assembly
  • High quality cast components
  • Durable long life performance.
See More

INA – Accelerator Belt Tensioner Kit (Part No.G6004452080INA)

Accelerator Belt Tensioner Kit

from

$142.17
Accelerator Belt Tensioner Kit

INA – Acc. Belt Tensioner (Part No.G600164174INA)

Acc. Belt Tensioner

from

$135.98
Acc. Belt Tensioner

INA – Accessory Belt Tensi (Part No.G600084905INA)

Accessory Belt Tensi

from

$74.12
The INA Accessory Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • High tension spring assembly
  • Precision bearing assembly
  • High quality cast components
  • Durable long life performance.
See More

Most Popular 2004 Volkswagen Passat Serpentine and V Belts

Customize your Volkswagen with 22 Serpentine and V Belts products like Serpentine Belts, Drive Belt Idler Assemblies, and V-Belts, all priced under $216.83.

Driveworks – Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count (Part No.740K6)

Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count

from

$34.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Driveworks – Poly Rib Belt Serpentine Belt; 33.5 Long, 4 Rib Count (Part No.335K4)

Poly Rib Belt Serpentine Belt; 33.5 Long, 4 Rib Count

from

$19.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count (Part No.5050510)

Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count

from

$32.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count (Part No.5060740)

Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count

from

$54.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count (Part No.510K5)

Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count

from

$23.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 33.5 Long, 4 Rib Count (Part No.5040335)

Poly Rib Belt Serpentine Belt; 33.5 Long, 4 Rib Count

from

$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 56.5 Long, 5 Rib Count (Part No.5050565)

Poly Rib Belt Serpentine Belt; 56.5 Long, 5 Rib Count

from

$38.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000579532ACD)

Professional V-Ribbed Serpentine Belt

from

$98.76
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060739)

Micro-V« Serpentine Drive Belt

from

$42.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100020808MBL)

Multi-Rib (Serpentine) Belt

from

$21.57
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Dayco – Serpentine Assy. Idler/Tensioner Pulley; Steel, 60mm Dia., 19mm Width, 4 Grooves (Part No.89072)

Serpentine Assy. Idler/Tensioner Pulley; Steel, 60mm Dia., 19mm Width, 4 Grooves

from

$46.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000148351CON)

Multi Rib (Serpentine) Belt

from

$216.83
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K040337)

Micro-V« Serpentine Drive Belt

from

$34.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100021012CON)

Multi Rib (Serpentine) Belt

from

$32.82
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000169541CON)

Multi Rib (Serpentine) Belt

from

$30.97
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100020808CON)

Multi Rib (Serpentine) Belt

from

$29.34
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100059533BAN)

Multi Rib (Serpentine) Belt

from

$26.37
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Autopart International Inc – Drive Belt (Part No.W10002073596API)

Drive Belt

from

$20.02
Drive Belt

Carquest Standard – Serpentine Belt: 33.5" Long, 4 Rib Count (Part No.335K4)

Serpentine Belt: 33.5" Long, 4 Rib Count

from

$18.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OE fit, form, and function
See More

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100026290MBL)

Multi-Rib (Serpentine) Belt

from

$15.78
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W100026290BAN)

Multi Rib (Serpentine) Belt

from

$15.64
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100026290CON)

Multi Rib (Serpentine) Belt

from

$14.89
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Top Picks for 2004 Volkswagen Passat Pulleys

Upgrade Volkswagen Passats with top-quality Pulleys parts, including 3 OEM and aftermarket selections for your 2004 model.

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 26mm Width, Smooth (Part No.89522)

Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 26mm Width, Smooth

from

$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

INA – INA Accessory Belt Idler Pulley (Part No.G6020391520INA)

INA Accessory Belt Idler Pulley

from

$66.47
The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Litens – Idler Pulley: Direct Fit, Steel, 60mm Diameter (Part No.900072A)

Idler Pulley: Direct Fit, Steel, 60mm Diameter

from

$56.99
This pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Europe to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel pulley preassembled on a steel mounting bracket. Fits 1997-2005 Audi A4 and VW Passat 1.8L engines. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

In-Demand Engine Cooling Hoses for 2004 Volkswagen Passats

Select from 13 premium Engine Cooling Hoses parts for your 2004 Volkswagen Passat, with prices ranging from $2.50 to $115.25.

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.06" Diameter (Part No.C72420)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.06" Diameter

from

$18.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

CRP – Radiator Hose O-Ring (Part No.G2004306831CRP)

Radiator Hose O-Ring

from

$2.55
Radiator Hose O-Ring

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.5" Long, 1.25" Diameter (Part No.C72707)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.5" Long, 1.25" Diameter

from

$83.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Rein – Radiator Hose (Part No.CHR0057R)

Radiator Hose

from

$29.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Hutchinson – Hutchinson Radiator Hose (Part No.G2000118506HUT)

Hutchinson Radiator Hose

from

$115.25
First-fit supplier to numerous automotive manufacturers, Hutchinson is today recognized as a leading world expert on engine cooling system hose solutions. Controlling design and manufacture, Hutchinson uses state-of-the-art technology due to its digital calculation capacity and its expert knowledge of fluid mechanics, and benefits from its significant mastery of plastic, silicone, metal and rubber materials that are used in these increasingly complex parts. Hutchinson became the market leader with easy and reliable solutions for manufacturers with extensive ranges of quick-release and click-on connections. In terms of automotive spare parts, Hutchinson offers access to first-fit parts for the replacement of radiator inlet and outlet hoses, parts used for the circulation of cooling liquid.

Product Features:
  • The lifespan of the hoses is close to that of the vehicle Manufacturer.
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Hutchinson – Hutchinson Radiator Hose (Part No.G2000168474HUT)

Hutchinson Radiator Hose

from

$92.90
First-fit supplier to numerous automotive manufacturers, Hutchinson is today recognized as a leading world expert on engine cooling system hose solutions. Controlling design and manufacture, Hutchinson uses state-of-the-art technology due to its digital calculation capacity and its expert knowledge of fluid mechanics, and benefits from its significant mastery of plastic, silicone, metal and rubber materials that are used in these increasingly complex parts. Hutchinson became the market leader with easy and reliable solutions for manufacturers with extensive ranges of quick-release and click-on connections. In terms of automotive spare parts, Hutchinson offers access to first-fit parts for the replacement of radiator inlet and outlet hoses, parts used for the circulation of cooling liquid.

Product Features:
  • The lifespan of the hoses is close to that of the vehicle Manufacturer.
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Rein – Rein Radiator Hose (Part No.G2000132274RIN)

Rein Radiator Hose

from

$83.87
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Radiator Hose (Part No.CHR0015R)

Radiator Hose

from

$47.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Burgaflex – Radiator Hose (Part No.G200084766BUR)

Radiator Hose

from

$34.42
Radiator Hose

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.25" Diameter (Part No.D72809)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.25" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Vaico – Cooling Hose (Part No.G2021126987VCO)

Cooling Hose

from

$17.25
The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:
  • Quick, easy mounting: quick connector from German production
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests
See More

MTC – Radiator Hose Clamp (Part No.G2010939603MTC)

Radiator Hose Clamp

from

$4.22
Radiator Hose Clamp

Meistersatz – Water Pipe O-Ring (Part No.G2026860201MEI)

Water Pipe O-Ring

from

$2.50
Water Pipe O-Ring

Most Sold 2004 Volkswagen Passat Heater Hoses

Explore our best-selling Volkswagen parts for the 2004 Passat among 7 OEM and aftermarket options starting from $11.32.

Rein – Heater Hose (Part No.CHH0351)

Heater Hose

from

$29.99
Rein Automotive OE quality heater hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8-1/2 Inch Length (Part No.87846)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 8-1/2 Inch Length

from

$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 14 Inch Length (Part No.88474)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 14 Inch Length

from

$38.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length (Part No.88455)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 12 Inch Length

from

$23.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dorman – Molded Heater Hose: Steel (Part No.626-534)

Molded Heater Hose: Steel

from

$106.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dayco – Dayco, Heater Hose (Part No.R30301221025DAY)

Dayco, Heater Hose

from

$22.46
Dayco, Heater Hose

Hutchinson – Heater Hose (Part No.R3030163305HUT)

Heater Hose

from

$11.32
First-fit supplier to numerous automotive manufacturers, Hutchinson is today recognized as a leading world expert on engine cooling system hose solutions. Controlling design and manufacture, Hutchinson uses state-of-the-art technology due to its digital calculation capacity and its expert knowledge of fluid mechanics, and benefits from its significant mastery of plastic, silicone, metal and rubber materials that are used in these increasingly complex parts. Hutchinson became the market leader with easy and reliable solutions for manufacturers with extensive ranges of quick-release and click-on connections. In terms of automotive spare parts, Hutchinson offers access to first-fit parts for the replacement of radiator inlet and outlet hoses, parts used for the circulation of cooling liquid.

Product Features:
  • The lifespan of the hoses is close to that of the vehicle Manufacturer.
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 125C
See More

Top-Rated Belts and Hoses Brands For Your 2004 Volkswagen Passat

Shop for the best-rated brands offering Belts and Hoses and other products for your 2004 Volkswagen Passats. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2004 Passat start at just $11.29 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2004 Volkswagen Passat Belts and Hoses

When it comes to maintaining or upgrading your 2004 Volkswagen Passat, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2004 Volkswagen Passat. With over 15 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.29, with an average price of just $47.33. Plus, with over 89 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Belt Serpentine Belt; 56.5 Long, 5 Rib Count
from
$38.99
This product is not rated

Poly Rib Belt Serpentine Belt; 56.5 Long, 5 Rib Count

“”

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length
from
$11.29
This product is not rated

Molded Heater Hose; EPDM Rubber, 1/4 Inch Diameter, 8 1/4 Inch Length

“”

Popular Driveworks 2004 Volkswagen Passat Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2004 Volkswagen Passat owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2004 Passat, Advance Auto Parts carries a full inventory of 3 Driveworks Belts and Hoses. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $19.79 to $34.99, plus, with more than 45 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count
from
$34.99

(33)

Poly Rib Belt Serpentine Belt; 74.02 Long, 6 Rib Count

“Really easy to install”

Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count
from
$23.99

(5)

Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count

“Worked great on fisrt try loyal customer for more than 30 yrs”

FAQs for 2004 Volkswagen Passat Belts and Hoses

Which Belts and Hoses are best-sellers for 2004 Volkswagen Passats?

Out of 73 Belts and Hoses that fit 2004 Volkswagen Passats, the following parts are the top sellers:

What’s the price range for 2004 Volkswagen Passat Belts and Hoses?

Belts and Hose prices for the 2004 Volkswagen Passat start at $1.38 and go up to $231.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2004 Volkswagen Passat?

The average price for Belts and Hoses for the 2004 Volkswagen Passat is $49.91. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Volkswagen Passat model years?

Yes, we currently carry Belts and Hoses for 31 model years of Volkswagen Passats between 1990 and 2022. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2004 Volkswagen Passat?

The cheapest 2004 Volkswagen Passat Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2004 Volkswagen Passat?

Out of 549 reviews by customers, our 2004 Volkswagen Passat Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2004 Volkswagen Passat and their top-rated products:

What types of Belts and Hoses do you sell for my 2004 Volkswagen Passat?

Can I get help with 2004 Volkswagen Passat Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Belts and Hoses and more.

What is your return policy for Volkswagen Passat Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Volkswagen Passat Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.