2004 Toyota RAV4 Engine Parts

Below you will find various in-demand Toyota Engine Parts, components and accessories for your 2004 RAV4. Advance Auto Parts has popular RAV4 parts like Camshafts, Engine Timing Parts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other RAV4 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2004 Toyota RAV4 Engine Parts below and start saving instantly.

Popular 2004 Toyota RAV4 Engine Parts Categories

Valve Covers

Engine Variable Timing Solenoids

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Crankshaft Position Sensors

Engine Crankshaft Kits

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Engine Variable Timing Solenoid Filters

Oil Pans

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Crankshaft Seals

Timing Sets

Oil Caps

Engine Coolant Pipe Gaskets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Timing Chain Tensioners

O-Rings

Timing Cover Seals

Engine Oil Cooler Seals

Engine Valve Stem Seals

Standard Rod Bearing Sets

Timing Chains

Camshaft Seals

Oil Pump Chains

Engine Oil Seal Rings

Timing Chain Guides

Engine Oil Pan Kits

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Engine Oil Pump Chain Tensioners

Cylinder Head Bolt Washer Sets

Oil Pump Sprockets

Engine Oil Pump Chain Rails

Dipstick Housing Gaskets

Engine Balance Shaft Tension Spring

Engine Oil Filler Cap Gaskets

Remanufactured Engines

Cylinder Heads

Engine Valve Guides

Engine Assembly Lube

Essential Engine Parts for 2004 Toyota RAV4s

from

$7.00

Valve Guide

from

$403.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$21.99

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy..

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications..
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.99

Product Features:

Brand may vary by location

from

$3.83

Oil Filler Cap Gasket

from

$3.23

OIL COOLER SEAL

from

$32.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to TOYOTA 96-00;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1996-2000
Weight approx: 2 Lbs

from

$3279.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$17.29

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
7mm X 52 SR links
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$296.99

Advance Auto Parts is proud to carry this kit with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

Includes Cam Sprocket, 2 Chains, Crank Sprocket, 3 Guides, 3 Tensioners
8 Pieces
Meets or exceeds O.E.M. performance
Coated in rust preventative

from

$239.99

Product Features:

Imperial Swirl-Cool« engine oil cooler kit
Size: 1-1/2″ x 6-1/2″ x 18″
Heavy-duty applications
All except Chevrolet V8 applications
Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
Heavy duty applications
All except Chevrolet V8 applications

from

$261.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function.
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$150.75

Dorman’s Engine Variable Timing Solenoid is durably engineered for years of effective performance. Replacement restores smooth performance and returns your vehicle to normal operation.

Product Features:

Conveniently packaged with the installation gasket (where applicable)
Direct replacement for a proper fit every time
Easily plugs into the electrical harness
Resistant against wear and tear

from

$67.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra

from

$1.67

Oil Drain Plug Gaske

from

$1.45

AT Filter O-Ring

from

$18.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$254.09

Engineered to exacting OE specifications, ASIAN oil pumps deliver ideal oil pressure and flow to the engine without creating excess load. Lubricating critical components to extend the life of the engine, ASIAN oil pumps are always OE matched.

Product Features:

OE Design and Function
Delivers ideal oil pressure without excess load
Aluminum die-casting technology allows for size and weight reduction
Maximizes the life of the engine

from

$24.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$33.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$175.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$491.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$54.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$75.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$709.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$26.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$11.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Upgrade your 2004 Toyota RAV4 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2004 Toyota RAV4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Engine Parts are key to keeping your RAV4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 103 Engine Parts for the 2004 Toyota RAV4, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2004 Toyota RAV4 at great prices. Our Engine Parts inventory for this model ranges from just $1.18 to $3,529.99, with an average price of $109.15. Our 103 Engine Parts in stock come from 35 trusted brands, so you’re sure to find the right part for your 2004 Toyota RAV4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Toyota RAV4, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Carquest Premium, and more. FELPRO Engine Parts start at just $18.29 and boast an impressive 5 stars average rating from customers. National and Carquest Premium also bring quality to the table, with Engine Parts available starting at $7.79, and at an average 4 stars rating. With 167 customer reviews and counting, our 2004 Toyota RAV4 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Toyota RAV4 is always ready to roll. We’re committed to providing you with everything you need to keep your RAV4 in top shape, all in one place. Start shopping confidently below for your 2004 Toyota RAV4!

Best-Selling Camshafts for 2004 Toyota RAV4s

Enhance the driving experience in your Toyota with 16 quality Camshaft components, starting at $4.99.

show more show less

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$41.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$22.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$7.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$44.99

The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

from

$14.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$33.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$4.99

Product Features:

Brand may vary by location

from

$86.99

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

Delphi products are manufactured in a Delphi ISO certified facility
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

from

$33.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$27.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$86.16

DENSO’s Camshaft Position Sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability, durability, and detection accuracy.

Product Features:

Innovative MRE sensor design uses a pair of MREs on an Integrated Circuit (IC) chip for extreme accuracy
Molded IC chip located inside the cylindrical magnet is positioned closer to the gears
Polyphenylene sulfide resin coating resists damage from engine oil, fuel and emission byproducts

from

$244.99

from

$48.82

Camshaft Position Se

Most Popular 2004 Toyota RAV4 Engine Timing Parts

Customize your Toyota with 21 Engine Timing Parts products like Engine Variable Timing Solenoids, Engine Timing Chain Kits, and Timing Sets, all priced under $504.99.

show more show less

from

$91.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$54.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$194.99

Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$72.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
Durable construction – this part is made from quality materials to ensure a long service life.
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$71.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$8.99

This engine variable valve timing (VVT) solenoid filter is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine variable valve timing (VVT) solenoid filter is designed to match the fit and function of the original filter on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to clogging.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.49

This Oil Pump Spring utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Refer to our online catalog for detailed application-specific information

from

$54.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$33.99

from

$504.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$355.99

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:

Direct replacement – this VVT sprocket fits and performs like the original sprocket
Durable construction – made from durable steel and precision machined for reliable performance
100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$296.99

Advance Auto Parts is proud to carry this kit with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

Includes Cam Sprocket, 2 Chains, Crank Sprocket, 3 Guides, 3 Tensioners
8 Pieces
Meets or exceeds O.E.M. performance
Coated in rust preventative

from

$209.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$97.99

NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:

NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.

from

$64.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$55.99

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$50.85

The OSK Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision tension assembly
OE specified guide rail when supplied
Durable long life performance

from

$33.52

Timing Camshaft Spro

from

$32.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$15.15

Oil Pump Chain Tensi

from

$10.29

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Top Picks for 2004 Toyota RAV4 Engine Gaskets and Seals

Upgrade Toyota RAV4s with top-quality Engine Gaskets and Seals parts, including 16 OEM and aftermarket selections for your 2004 model.

show more show less

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$1.67

Oil Drain Plug Gaske

from

$32.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$31.31

Ishino Japan is an original equipment manufacturer of sealing products, lubricants, and gaskets. Toyota does not use an oil pan gasket. Instead they use a silicone sealant. This # was created for lost sales tracking purposes only. We used the oil pan OE # as the basis for this research.

from

$25.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$25.37

Innovative product design and high quality materials allows us to provide Victor Reinz gaskets to meet specific engine requirements. The Dana global team of experienced engineers works with all engine types and configurations to offer the best sealing solution for specific applications.

Product Features:

Improved reliability, durability, and engine performance
Embossment shapes designed to improve durability
Stopper layer can be designed with topography to optimize load balance

from

$5.67

Valve Stem Seal

from

$5.54

Water Outlet Adapter

from

$5.23

Oil Cooler Seal

from

$4.36

Valve Stem Seal

from

$3.83

Oil Filler Cap Gasket

from

$1.89

Camshaft Solenoid Ga

from

$1.45

AT Filter O-Ring

from

$1.18

SEAL RING – COPPER

In-Demand Valve Cover and Cylinder Heads for 2004 Toyota RAV4s

Select from 9 premium Valve Cover and Cylinder Heads parts for your 2004 Toyota RAV4, with prices ranging from $7.00 to $605.99.

show more show less

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$73.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$144.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$261.99

Direct replacement – this valve cover matches the original equipment part for fit and function.
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$605.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$175.93

WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications
Most gasket sets include components needed for a complete overhaul

from

$105.24

Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.

Product Features:

Original equipment design and quality
Head sets give you original equipment form, fit, and function
Utilizes OE equivalent or better materials in all head sets
Packaged in shrink wrapped tray

from

$7.00

Valve Guide

Most Sold 2004 Toyota RAV4 Engine Mounts

Explore our best-selling Toyota parts for the 2004 RAV4 among 9 OEM and aftermarket options starting from $32.49.

show more show less

from

$60.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to TOYOTA 01-05;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2005
Weight approx: 2 Lbs

from

$32.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to TOYOTA 01-05;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2005
Weight approx: 2 Lbs

from

$67.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to TOYOTA 01-03;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2003
Weight approx: 3 Lbs

from

$102.59

Engine Mount

from

$82.00

Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:

USA Development and OEM laboratory – 14 OEM Engineers
Design Solutions and Installation Enhancements to Failing OEM designs
Complete Factory Testing and Vehicle Verification Resources

from

$81.27

Engine Mount

from

$61.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials to dampen vibration
Additional factory parts included where applicable
Designed for underhood conditions
Application specific for this vehicle

from

$61.99

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials to dampen vibration
Additional factory parts included where applicable
Designed for underhood conditions
Application specific for this vehicle

from

$35.49

Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
Premium materials to dampen vibration
Additional factory parts included where applicable
Designed for underhood conditions
Application specific for this vehicle

Top-Rated Engine Parts Brands For Your 2004 Toyota RAV4

Shop for the best-rated brands offering Engine Parts and other products for your 2004 Toyota RAV4s. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Carquest Premium, and more. Engine Parts from these brands that fit a 2004 RAV4 start at just $7.79 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2004 Toyota RAV4 Engine Parts

When it comes to maintaining or upgrading your 2004 Toyota RAV4, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2004 Toyota RAV4. With over 9 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $52.41. Plus, with over 135 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$31.49

(113)

Engine Valve Cover Gasket Set

“Fit as it should, always have great service with fel-pro”

from
$22.49

This product is not rated

Engine Crankshaft Seal Kit

“”

from
$18.29

This product is not rated

Engine Cylinder Head Bolt Washer Set

“”

Popular National 2004 Toyota RAV4 Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2004 Toyota RAV4 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2004 RAV4, Advance Auto Parts carries a full inventory of 9 National Engine Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these National Engine Parts range from $9.99 to $41.49, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$32.99

This product is not rated

Multi Purpose Seal

“”

from
$33.99

This product is not rated

Shaft Repair Sleeve

“”

from
$14.99

This product is not rated

Multi Purpose Seal

“”

FAQs for 2004 Toyota RAV4 Engine Parts

Which Engine Parts are best-sellers for 2004 Toyota RAV4s?

Out of 103 Engine Parts that fit 2004 Toyota RAV4s, the following parts are the top sellers:

Multi Purpose Seal (18442666) – $9.99
Camshaft Sensor (12339315) – $22.99
Multi Purpose Seal (15440036) – $11.99

What’s the price range for 2004 Toyota RAV4 Engine Parts?

Engine Part prices for the 2004 Toyota RAV4 start at $1.18 and go up to $3,529.99 for the most premium parts.

What’s the average price of a Engine Part for a 2004 Toyota RAV4?

The average price for Engine Parts for the 2004 Toyota RAV4 is $109.15. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Toyota RAV4 model years?

Yes, we currently carry Engine Parts for 28 model years of Toyota RAV4s between 1996 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2004 Toyota RAV4?

The cheapest 2004 Toyota RAV4 Engine Parts we carry in stock are:

SEAL RING – COPPER (11263320) – $1.18
AT Filter O-Ring (12065932) – $1.45
Oil Drain Plug Gaske (11999281) – $1.67
Camshaft Solenoid Ga (11472350) – $1.89
Engine Oil Pump Tensioner Spring (12154784) – $2.49

What are the top-rated Engine Parts that fit the 2004 Toyota RAV4?

Out of 167 reviews by customers, our 2004 Toyota RAV4 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2004 Toyota RAV4 and their top-rated products:

Valve Cover and Cylinder Heads
- CYLINDER HEAD BOLT SET (20688367) – $73.99
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (20780012) – $61.99
- Cylinder Head Gasket Set (20780338) – $144.99
Engine Gaskets and Seals
- CYLINDER HEAD BOLT SET (20688367) – $73.99
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (20780012) – $61.99
- Cylinder Head Gasket Set (20780338) – $144.99

What types of Engine Parts do you sell for my 2004 Toyota RAV4?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2004 Toyota RAV4:

Can I get help with 2004 Toyota RAV4 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Engine Parts and more.

What is your return policy for Toyota RAV4 Engine Parts?

Advance Auto Parts keeps returns simple. For new Toyota RAV4 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Toyota RAV4 Engine Parts

Mahle – Valve Guide (Part No.A3060194345MAH)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1461)

Dorman – Help – Engine Oil Dipstick – Metal (Part No.921-135)

Driveworks – Oil Seal (Part No.S-223801)

Ishino – Oil Filler Cap Gasket (Part No.A6150149731ISH)

Ishino Stone – OIL COOLER SEAL (Part No.A6310299047ISH)

Anchor – Engine Mount: Rear, 1 Piece (Part No.8855)

Spartan – Engine Long Block; Toyota 1AZFE 00-03 Engine (Part No.856)

Cloyes Gear – Engine Oil Pump Chain (Part No.C751)

Carquest Premium – Partial Timing Set (Part No.76186)

Imperial – Engine Oil Cooler (Part No.241040)

Dorman – Valve Covers: Direct Replacement, Aluminum (Part No.264-492)

Dorman – Variable Valve Timing (VVT) Solenoid (Part No.A5132336762DOR)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26321 PT)

Mahle – Oil Drain Plug Gaske (Part No.A6120121244MAH)

Elring – AT Filter O-Ring (Part No.J5001461422ELR)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26749)

ASIAN – AISIN Oil Pump (Part No.A6010176461ASC)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5795)

Carquest Premium – Camshaft Sensor (Part No.CSC1352)

Felpro – Cylinder Head Gasket Set (Part No.HS 26562 PT)

Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.31720)

National – Shaft Repair Sleeve (Part No.99333)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72249)

Spartan – Engine Cylinder Head; Toyota 2GRFE 05-15 LFT Head (Part No.2861AL)

Cloyes Gear – Engine Timing Chain (Part No.9-4313)

Felpro – Engine Cylinder Head Bolt Washer Set (Part No.ES 72183)

Felpro – Engine Cylinder Head Bolt Washer Set (Part No.ES 72899)

National – Multi Purpose Seal (Part No.223801)

National – Multi Purpose Seal (Part No.2025)

National – Shaft Repair Sleeve (Part No.99147)

National – Multi Purpose Seal (Part No.223830)

Carquest Premium – Camshaft Sensor (Part No.CSC1082)

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1149)

NTK – Camshaft Position Sensor (Part No.EC0071)

National – Multi Purpose Seal (Part No.223010)

National – Shaft Repair Sleeve (Part No.99196)

Driveworks – Oil Seal (Part No.S-223801)

Delphi – Engine Camshaft Position Sensor (Part No.SS10502)

Carquest Premium – Camshaft Sensor (Part No.CSC1352)

National – Shaft Repair Sleeve (Part No.99114)

DENSO – First Time Fit Camshaft Position Sensor (Part No.A4015146273ND)

Carquest Premium – Automatic Transmission Speed Sensor Connector (Part No.PTA2956)

WSO – Camshaft Position Se (Part No.A4015186163WSO)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1018)

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5527)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, With Sprockets (Part No.9-0752S)

Dorman – Variable Valve Timing Solenoid (Part No.916-940)

Cloyes Gear – Engine Timing Chain (Part No.C752)

Dorman – Variable Valve Timing Filter Screen (Part No.926-125)

Cloyes Gear – Engine Oil Pump Tensioner Spring (Part No.9-5519)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5522)

Carquest Premium – Center High Mount Stop Light Connector (Part No.PTA1472)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 134 Links, Timing Components, Phasers, Solenoids, & More (Part No.9-0752SVVT)

Dorman – Camshaft Phaser (Part No.918-731)

Carquest Premium – Partial Timing Set (Part No.76186)

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, Without Sprockets (Part No.9-0752SX)

NTK – EN VAR TIME SOLENOID (Part No.VV0066)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S846)

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5521)

OSK – OSK Timing Chain Tensioner (Part No.A5110132914OSK)

OSK – Timing Camshaft Spro (Part No.A5196132511OSK)

National – Shaft Repair Sleeve (Part No.99145)

Original Equipment – Oil Pump Chain Tensi (Part No.A6035163539OEA)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S925)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50530 R)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72878-1)

Felpro – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber W/ Gasket Sealant, 4 Piece (Part No.OS 30713)

Mahle – Oil Drain Plug Gaske (Part No.A6120121244MAH)

National – Multi Purpose Seal (Part No.710189)

Ishino – Oil Pan Gasket (Part No.A6130296515ISH)

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10295-01)

Nippon Reinz – Nippon Reinz Valve Cover Gasket (Part No.A8030152372NRZ)

Ishino – Valve Stem Seal (Part No.A8070180150ISH)

Mahle – Water Outlet Adapter (Part No.G20392590578MAH)

Ishino – Oil Cooler Seal (Part No.A6310299049ISH)

Ishino – Valve Stem Seal (Part No.A8070180151ISH)

Ishino – Oil Filler Cap Gasket (Part No.A6150149731ISH)

Ishino Stone – Camshaft Solenoid Ga (Part No.A8016336457ISH)