2004 Sterling Acterra 6500 Belts and Hoses

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. En

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life.
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Cummins ISB/ISC/ISL engine. New mounting bolt included. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
• Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions included.
• Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
• Professional Mechanics will change this tensioner in approx. 1/2 hour
• Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:

• The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
• Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
• The laminated construction helps absorb greater shock loads associated with diesel engines
• Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
• Problem solver for troubled drives
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation – the leading cause of hose failure.
• Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
• Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
• Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
• Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

• Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
• Engineered with compounds that resist electrochemical degradation
• Approved for marine applications
• Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: For a maintenance free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transfer applications
• PLEASE NOTE: Item is priced and sold by the inch. See store for details.

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

Product Features:

• Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
• Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
• OE-quality fit for virtually every domestic or import vehicle on the road today
• Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
• Premium bearings eliminate bearing noise
• Mounting hardware included for some popular applications
• Reliable operation under severe conditions

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:

• Green Stripe construction provides best cost-per-mile economics
• Abrasion-resistant cover
• Engineered with materials to resist electrochemical degradation
• Reduces water loss from water permeating the hose wall and cover
• Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
• Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
• Note: For a maintenance free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transfer applications
• PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:

• Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
• Engineered with compounds that resist electrochemical degradation
• Approved for marine applications
• Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: For a maintenance free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transfer applications
• PLEASE NOTE: Item is priced and sold by the inch. See store for details.

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
• Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
• Installation instructions included.

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.