2004 Saturn Vue Steering and Chassis Parts

Below you will find various in-demand Saturn Steering and Chassis Parts, components and accessories for your 2004 Vue. Advance Auto Parts has popular Vue parts like Steering Shafts, Ball Joints, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Vue model years including 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 2004 Saturn Vue Steering and Chassis Parts below and start saving instantly.

Popular 2004 Saturn Vue Steering and Chassis Parts Categories

Power Steering Coolers

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Front Alignment Kits

Drive Shaft CV Joints

Suspension Stabilizer Bars

Camber Kits

Sway Bar Link Bushing Kits

Pinion Bearings

Sway Bar Bushings

Alignment Camber Bolt Assortments

Essential Steering and Chassis Parts for 2004 Saturn Vues

from

$225.99

This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$83.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$123.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$42.49

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$35.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$24.49

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$26.49

Camber/Toe Nut

from

$11.49

Camber Bolt Kit

from

$49.99

CAM BOLT KIT

from

$29.99

CONTROL ARM KIT

from

$37.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$119.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$201.99

CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:

Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
Corrosion-resistant electro-coating on steel control arms to reduce rust and extend service life.
Pre-installed ball joints and bushings (when applicable) for easy installation
Fully polished ball studs combined with synthetic bearing technology for maintenance-free smooth operation and improved reliability
Hardware included for easier installation

from

$339.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$201.99

This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.

Product Features:

Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone testing to ensure a quality fit and long service life

from

$342.99

Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone testing to ensure a quality fit and long service life

from

$212.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$438.99

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$329.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$597.99

Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Complete with Inner Tie Rods & Boots
Includes necessary hardware where applicable (o-ring, washers, etc…)
Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$365.99

A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:

Protective coating applied to each unit, where applicable, to extend the life of the unit
100% performance testing to ensure perfect fit, function and reliable performance
100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
Valve housings, where applicable, have polished micro-finish sleevings for durability
Built to meet or exceed O.E.M. performance

from

$357.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100 percent replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Upgrade your 2004 Saturn Vue with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 Saturn Vue, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Saturn or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Vue functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Steering and Chassis Parts for the 2004 Saturn Vue, designed to meet your needs without breaking the bank. From Steering Shaft replacements to Ball Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2004 Saturn Vue at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $9.99 to $438.99, with an average price of $96.03. Our 52 Steering and Chassis Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2004 Saturn Vue without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Saturn Vue, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, DriveWorks, Imperial, and more. Moog Steering and Chassis Parts start at just $37.49 and boast an impressive 4.5 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $11.49, and at an average 4.3 stars rating. With 1,034 customer reviews and counting, our 2004 Saturn Vue Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Saturn Vue is always ready to roll. We’re committed to providing you with everything you need to keep your Vue in top shape, all in one place. Start shopping confidently below for your 2004 Saturn Vue!

Best-Selling Steering Shafts for 2004 Saturn Vues

Enhance the driving experience in your Saturn with 1 quality Steering Shaft components, starting at $212.99.

show more show less

from

$212.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Most Popular 2004 Saturn Vue Ball Joints

Customize your Saturn with 9 Ball Joints products like Lower Ball Joints and Lower Control Arm and Ball Joints, all priced under $235.99.

show more show less

from

$235.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$55.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$37.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$52.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$235.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$219.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$189.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$189.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$119.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Top Picks for 2004 Saturn Vue Tie Rods

Upgrade Saturn Vues with top-quality Tie Rods parts, including 7 OEM and aftermarket selections for your 2004 model.

show more show less

from

$45.49

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$24.49

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$35.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$83.99

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$58.99

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$109.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$96.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

In-Demand Sway Bars for 2004 Saturn Vues

Select from 19 premium Sway Bars parts for your 2004 Saturn Vue, with prices ranging from $17.99 to $104.99.

show more show less

from

$37.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$22.29

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$17.99

Sway Bar Link Kit

from

$44.49

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$44.99

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$32.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$37.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$32.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$26.49

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$39.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$17.99

PREMIUM MATERIALS — Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$42.49

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$42.49

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$26.49

Driveworks bushings are designed to absorb vibration and noise and deliver better handling, while providing the performance of urethane without the “squeak” normally associated with it.

Product Features:

Meets or exceeds OE performance specifications
Replacement helps reduce vehicle noise and sway while turning

from

$104.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$83.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$64.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$42.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

Most Sold 2004 Saturn Vue Power Steering Parts

Explore our best-selling Saturn parts for the 2004 Vue among 6 OEM and aftermarket options starting from $9.99.

show more show less

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$365.99

Protective coating applied to each unit, where applicable, to extend the life of the unit
100% performance testing to ensure perfect fit, function and reliable performance
100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
Valve housings, where applicable, have polished micro-finish sleevings for durability
Built to meet or exceed O.E.M. performance

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$357.99

100 percent replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Top-Rated Steering and Chassis Parts Brands For Your 2004 Saturn Vue

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2004 Saturn Vues. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2004 Vue start at just $11.49 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2004 Saturn Vue Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 Saturn Vue, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2004 Saturn Vue. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.49, with an average price of just $106.32. Plus, with over 11 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $235.99

(1)

Front Left Lower Suspension Control Arm and Ball Joint Assembly

“Made very well and Perfect fit with no issues installing them”

from $45.49

(9)

Steering Tie Rod End

“Great part”

from $37.49

(1)

Suspension Stabilizer Bar Link

“When I was looking for a good deal for the parts, I got the best option try different websites and ended up buying the best. I really like this brand ”

Popular DriveWorks 2004 Saturn Vue Steering and Chassis Parts

DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2004 Saturn Vue owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2004 Vue, Advance Auto Parts carries a full inventory of 3 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Saturn in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range from $11.49 to $24.49, plus, with more than 22 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $24.49

(16)

TIE ROD END 1 EA DRIVE

“Good muy buen material”

from $17.99

(3)

Sway Bar Link Kit

“Very Ez to install”

from $11.49

(3)

Camber Bolt Kit

“Se instalo facil es muy bueno”

FAQs for 2004 Saturn Vue Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2004 Saturn Vues?

Out of 52 Steering and Chassis Parts that fit 2004 Saturn Vues, the following parts are the top sellers:

TIE ROD END 1 EA DRIVE (10195705) – $24.49
Camber Bolt Kit (10361721) – $20.49
Ball Joint (15510890) – $37.99

What’s the price range for 2004 Saturn Vue Steering and Chassis Parts?

Steering and Chassis Part prices for the 2004 Saturn Vue start at $9.99 and go up to $438.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2004 Saturn Vue?

The average price for Steering and Chassis Parts for the 2004 Saturn Vue is $96.03. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Saturn Vue model years?

Yes, we currently carry Steering and Chassis Parts for 7 model years of Saturn Vues between 2002 and 2010. Steering and Chassis Parts are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2003, and 2002.

What are the cheapest Steering and Chassis Parts for my 2004 Saturn Vue?

The cheapest 2004 Saturn Vue Steering and Chassis Parts we carry in stock are:

Bearing Race (3277569) – $9.99
Camber Bolt Kit (10361759) – $11.49
Mounting Kit System (6014844) – $11.99
Alignment Camber Kit (20516971) – $17.79
Sway Bar Link Kit (10361752) – $17.99

What are the top-rated Steering and Chassis Parts that fit the 2004 Saturn Vue?

Out of 1,034 reviews by customers, our 2004 Saturn Vue Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2004 Saturn Vue and their top-rated products:

Tie Rods
- Steering Tie Rod End (21880610) – $45.49
- TIE ROD END 1 EA DRIVE (10195705) – $24.49
Sway Bars
- Steering Tie Rod End (21880610) – $45.49
- TIE ROD END 1 EA DRIVE (10195705) – $24.49

What types of Steering and Chassis Parts do you sell for my 2004 Saturn Vue?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2004 Saturn Vue:

Can I get help with 2004 Saturn Vue Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Saturn Steering and Chassis Parts and more.

What is your return policy for Saturn Vue Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Saturn Vue Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Saturn Vue Steering and Chassis Parts

Dorman – Propeller Shaft CV Joint Kit (Part No.932-106)

MOOG – Steering Tie Rod End (Part No.EV80443)

Whiteline – Sway Bar Link (Part No.KLC163)

Carquest Premium – Stabilizer Bar Link (Part No.644-97548)

National – Bearing Race (Part No.M86610)

MOOG – Strut Alignment Camber Kit (Part No.K90474)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES800030)

Driveworks – Camber/Toe Nut (Part No.DW-K100015)

Driveworks – Camber Bolt Kit (Part No.DW-K7256)

Rare Parts – CAM BOLT KIT (Part No.RP16746)

Rare Parts – CONTROL ARM KIT (Part No.RP17608)

Rare Parts – Sway Bar Frame Bushing (Part No.RP19993)

Rare Parts – Sway Bar Frame Bushing (Part No.RP19994)

Driveworks – Ball Joint (Part No.DW-K5331)

Rare Parts – Ball Joint (Part No.RP10920)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Carquest Premium – Control Arm with Ball Joint (Part No.810-83791B)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP12527)

Dorman – Sway Bar Kit (Part No.927-113)

Dorman – Sway Bar Kit (Part No.927-126)

Dorman – Intermediate Steering Shaft (Part No.425-108)

MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-1050)

Edelmann – Factory New Rack and Pinion – Includes Inner Tie Rods (Part No.2142)

Cardone – Remanufactured Electronic Power Rack and Pinion Complete Unit (Part No.23-1812)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-1812)

Dorman – Intermediate Steering Shaft (Part No.425-108)

MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621129)

MOOG – Suspension Ball Joint (Part No.K5331)

Driveworks – Ball Joint (Part No.DW-K5331)

Carquest Premium – Ball Joint (Part No.410-65421)

MOOG – Front Right Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK621136)

Rare Parts – Control Arm W/ Ball Joint (Part No.RP12282)

Dorman – Suspension Control Arm (Part No.521-028)

Dorman – Suspension Control Arm (Part No.521-027)

Rare Parts – Ball Joint (Part No.RP10920)

MOOG – Steering Tie Rod End (Part No.ES800030)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES800030)

Carquest Premium – Tie Rod End (Part No.310-97550)

MOOG – Steering Tie Rod End (Part No.EV80443)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-EV80443)

Rare Parts – Tie Rod End (Part No.RP28623)

Rare Parts – Tie Rod End (Part No.RP26118)

MOOG – Suspension Stabilizer Bar Link (Part No.K80850)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200332)

Driveworks – Sway Bar Link Kit (Part No.DW-K80850)

MOOG – Suspension Stabilizer Bar Link (Part No.K80461)

MOOG – Suspension Stabilizer Bar Link (Part No.K80460)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80461)

Rare Parts – Sway Bar Frame Bushing (Part No.RP19993)

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K80460)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200333)

Dorman – Sway Bar Bushing Bracket Kit (Part No.928-325)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K200336)

Carquest Premium – Stabilizer Bar Link (Part No.644-97548)

Carquest Premium – Stabilizer Bar Link (Part No.644-97549)

Driveworks – Sway Bar Bushing (Part No.DW-K200333)

Rare Parts – Sway Bar Link Kit (Part No.RP19543)

Rare Parts – Sway Bar Link (Part No.RP19049)

Rare Parts – Sway Bar Link (Part No.RP19544)

Rare Parts – Sway Bar Frame Bushing (Part No.RP19997)

Rare Parts – Sway Bar Frame Bushing (Part No.RP19994)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Imperial – Power Steering Oil Cooler (Part No.241009)

Cardone – Remanufactured Electronic Power Rack and Pinion Complete Unit (Part No.23-1812)

National – Bearing Race (Part No.M86610)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-1812)