2004 Saturn Ion Fuel and Emissions Systems
More 2004 Saturn Ion Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2004 Saturn Ion, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2004 Saturn Ion Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
NTK – NTK Oxygen Sensor (Part No.C5010331595NTK)
from
$68.44
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
Carquest Premium – Oil Pressure Switch Connector (Part No.PTA1224)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Spectra Premium – Fuel Tank Straps (Includes 2 Straps) (Part No.ST258)
from
$35.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
NTK – Fuel Tank Pressure Sensor (Part No.FG0012)
from
$51.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Fuel Tank Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper pressure within the fuel tank and help detect leaks.
- The Fuel Tank Pressure Sensor reports the ambient pressure in the fuel tank and evaporative emission system so that the PCM may detect evaporative system leaks.
GM Genuine Parts – Fuel Tank Sending Unit O-Ring (Part No.G42)
from
$22.79
GM Genuine Parts Fuel Tank Sending Unit O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These O-rings help seal out contaminants, and help protect your vehicle’s fuel tank sending unit. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help seal out contaminants
- Help protect fuel tank sending unit
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
NTK – Manifold Absolute Pressure Sensor (Part No.MA0097)
from
$75.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
- The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Dorman – Chrysler, GM Push Rivet (Part No.961-359D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61337)
from
$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1001)
from
$36.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1175)
from
$98.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest – Air Charge Temperature Sensor Connector (Part No.PT5901)
from
$78.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
ACDelco – Vapor Canister Vent Valve (Part No.22865590)
from
$39.99
ACDelco GM Original Equipment Vapor Canister Vent Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. These original equipment vapor canister vent solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Controls fresh air flow to the canister
- Sends fuel vapors to the engine for re-burn
- Helps control fuel tank pressure
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Oxygen Sensor: 4 Wires, 190 mm Long, Heated, Exact Fit (Part No.213-968)
from
$93.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0013)
from
$79.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10037)
from
$96.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
- Provides superior fit resulting in an easier installations
- Maximizes fuel and engine efficiency
- Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions
Motorad – Tethered Fuel Cap (Part No.MGC840T)
from
$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Spectra Premium – Fuel Tank Lock Ring (Part No.TR7)
from
$17.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium lock rings meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Lock ring should be replaced when changing the fuel tank or fuel module
- Application specific design ensure a perfect fit guarantee
- OEM fit, form and function
- OEM design ensures corrosion resistance and prevents leakage from the fuel tank
- Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
Carquest – Multi Purpose Relay (Part No.83A1003)
from
$20.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1013)
from
$42.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
GM Genuine Parts – Fuel Pump and Level Sensor Module with Seal and Pipes (Part No.MU2221)
from
$306.99
GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289618ACD)
from
$26.36
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Vapor Canister Purge Valve (Part No.B7080352132ACD)
from
$67.53
The ACDelco GM Original Equipment Vapor Canister Purge Valve is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1873)
from
$72.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
ACDelco – Ambient Temp Sensor (Part No.P4025360741ACD)
from
$7.58
Ambient Temp Sensor
Carquest Premium – A/C Compressor Cut-Out Relay Connector (Part No.PTA1292)
from
$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Popular 2004 Saturn Ion Fuel and Emissions Systems Categories
2004 Saturn Ion Fuel and Emissions Systems
You count on your 2004 Saturn Ion to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 65 Fuel and Emissions Systems ranging in price from $3.79 to $277.99, you’re sure to find everything you need for your 2004 Saturn Ion.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 15 different brands like Bosch, Carquest Premium, and DENSO. 2004 Saturn Ion Fuel and Emissions Systems start as low as $3.79!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 699 extensive product reviews on 2004 Saturn Ion Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap: 10506, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 4.4 stars and Switching Oxygen Sensor: 4 Wire, 9.75" Long, Heated, Direct Fit with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2004 Saturn Ion below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2004 Saturn Ion
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Saturn Ion running right for years to come. In our inventory you’ll find brands like Bosch, Carquest Premium, DENSO, and even more.
Popular ACDelco Fuel and Emissions Systems
You’ll find popular ACDelco brand products across Air Flow Sensors. All are waiting to get your 2004 Saturn Ion back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated DENSO Fuel and Emissions Systems
If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Fuel and Emissions Systems for your 2004 Saturn Ion, and some of our most reviewed DENSO parts include:
FAQs for 2004 Saturn Ion Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2004 Saturn Ion?
Out of 65 Fuel and Emissions Systems for the 2004 Saturn Ion, the most popular in our inventory are:
What are the top-rated 2004 Saturn Ion Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 2004 Saturn Ion based on customer reviews/ratings are:
from
$24.99
(36)
Locking Fuel Cap: 10506, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“Perfect fit”
from
$68.99
(6)
Switching Oxygen Sensor: 4 Wire, 9.75" Long, Heated, Direct Fit
“Good quality sensor. Easy to put in. Just need PB Blaster and Elbow grease.”
from
$3.79
(5)
Fuel Injection Throttle Body Mounting Gasket
“If you’re going to replace your throttle body I would recommend buying a new gasket this was perfect for my truck”
