2004 Pontiac Sunfire Suspension Parts

Below you will find various in-demand Pontiac Suspension Parts, components and accessories for your 2004 Sunfire. Advance Auto Parts has popular Sunfire parts like Air Suspension and Kits, Control Arms, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other Sunfire model years including 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005 and more. Select a category of 2004 Pontiac Sunfire Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 Pontiac Sunfire Suspension Parts Categories

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Front and Rear Shock or Strut Kits

Shock Boots, Levelers, and Accessories

Lower Control Arm Bushings

Strut Bellows

Strut Mounts

Coil Spring Insulators

Air Suspension Sensor Connectors

Essential Suspension Parts for 2004 Pontiac Sunfires

from

$21.99

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$12.29

Designed to meet or exceeds OE performance specifications.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$54.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$36.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Eliminates vibration and squeak

from

$39.99

Eliminates vibration and squeak

from

$32.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$60.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$84.99

Complete Strut Assem

from

$69.99

Complete Strut Assem

from

$50.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$229.99

Prevents tire noise and vibration

from

$204.99

Quick Strut Kit

from

$144.99

Quick Strut Kit

from

$30.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING – Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS – Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN – Engineered to match or exceed OE requirements
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$25.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$25.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$28.49

Backed by superior materials and rigorous testing, MOOG Problem Solver vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

SMOOTH ROTATION — Exclusive ball and socket design allows for smooth rotational movement
EASY TO INSTALL — Design saves time during installation by aligning the bushing sleeve to insert the bolt
LOW MAINTENANCE — Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
PREMIUM MATERIALS — Made from high-quality polymer and steel compounds for durability and ride performance
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Easier to install and lasts longer than typical OE designs

from

$158.48

Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. An all-in-one solution, the Monroe Quick-Strut strut assembly simplifies the installation process by including all the required components in a single unit. With a heritage of delivering leading-edge products for over 100 years, you can count on Monroe for your next repair.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
IMPROVES STEERING – Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference Guarantee
ASSEMBLED IN THE USA – This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components

from

$89.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$99.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$157.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$36.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$42.99

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Upgrade your 2004 Pontiac Sunfire with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2004 Pontiac Sunfire, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Suspension Parts are key to keeping your Sunfire functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Suspension Parts for the 2004 Pontiac Sunfire, designed to meet your needs without breaking the bank. From Air Suspension and Kit replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2004 Pontiac Sunfire at great prices. Our Suspension Parts inventory for this model ranges from just $12.29 to $229.99, with an average price of $65.84. Our 35 Suspension Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2004 Pontiac Sunfire without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Pontiac Sunfire, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Driveworks, and more. Moog Suspension Parts start at just $30.49 and boast an impressive 4.5 stars average rating from customers. Monroe and Driveworks also bring quality to the table, with Suspension Parts available starting at $12.29, and at an average 4.4 stars rating. With 108 customer reviews and counting, our 2004 Pontiac Sunfire Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Pontiac Sunfire is always ready to roll. We’re committed to providing you with everything you need to keep your Sunfire in top shape, all in one place. Start shopping confidently below for your 2004 Pontiac Sunfire!

Best-Selling Air Suspension and Kits for 2004 Pontiac Sunfires

Enhance the driving experience in your Pontiac with 7 quality Air Suspension and Kit components, starting at $23.99.

show more show less

from

$26.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$32.99

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$54.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$144.99

Quick Strut Kit

from

$204.99

Quick Strut Kit

Most Popular 2004 Pontiac Sunfire Control Arms

Customize your Pontiac with 11 Control Arms products like Lower Control Arm Bushings, all priced under $55.99.

show more show less

from

$30.49

HIGHLY PRECISE ENGINEERING – Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS – Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN – Engineered to match or exceed OE requirements
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$28.49

SMOOTH ROTATION — Exclusive ball and socket design allows for smooth rotational movement
EASY TO INSTALL — Design saves time during installation by aligning the bushing sleeve to insert the bolt
LOW MAINTENANCE — Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
PREMIUM MATERIALS — Made from high-quality polymer and steel compounds for durability and ride performance
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Easier to install and lasts longer than typical OE designs

from

$16.99

Control Arm Bushing

from

$25.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$25.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$21.49

Easy to install
Long-lasting performance
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$19.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$55.99

Worn control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to ‘as new’ condition utilising Nolathane’s superior formulation bushings with core characteristics ensuring superior elasticity, memory and outright durability resulting in positive steering precision and feedback.

Product Features:

Kit Contains: 6 bushings, 2 Tubes, Install Guide, Grease

from

$46.99

CONTROL ARM BUSHING

from

$21.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$20.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top Picks for 2004 Pontiac Sunfire Coil and Leaf Springs

Upgrade Pontiac Sunfires with top-quality Coil and Leaf Springs parts, including 7 OEM and aftermarket selections for your 2004 model.

show more show less

from

$119.99

Engineered to get more miles from your vehicle, the RoadMatic® strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:

QUICKER, SAFER, EASIER AND COMPLETE REPAIR — Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE — Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL — Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE — Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE — Available for domestic and import passenger cars, light trucks and SUVs
BUY WITH CONFIDENCE — Comes with a limited warranty. Visit Monroe.com for details.

from

$157.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$89.99

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$167.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$99.99

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$39.99

Eliminates vibration and squeak

from

$36.99

Eliminates vibration and squeak

In-Demand Shocks and Struts for 2004 Pontiac Sunfires

Select from 10 premium Shocks and Struts parts for your 2004 Pontiac Sunfire, with prices ranging from $12.29 to $229.99.

show more show less

from

$50.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$129.99

QUICKER, SAFER, EASIER AND COMPLETE REPAIR — Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
GET MORE MILES FROM YOUR RIDE — Engineered and fit and ride tested to meet OE spec
EASY TO INSTALL — Fully integrated design reduces installation time, eliminating the need for a spring compressor
CONSISTENT PERFORMANCE — Features nitrogen gas-charge and all-weather fluid for improved ride and handling
COVERAGE — Available for domestic and import passenger cars, light trucks and SUVs
BUY WITH CONFIDENCE — Comes with a limited warranty. Visit Monroe.com for details.

from

$60.99

Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic passenger cars
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$12.29

Designed to meet or exceeds OE performance specifications.

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$21.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$42.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$36.99

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$69.99

Complete Strut Assem

from

$84.99

Complete Strut Assem

from

$229.99

Prevents tire noise and vibration

Top-Rated Suspension Parts Brands For Your 2004 Pontiac Sunfire

Shop for the best-rated brands offering Suspension Parts and other products for your 2004 Pontiac Sunfires. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Driveworks, and more. Suspension Parts from these brands that fit a 2004 Sunfire start at just $12.29 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2004 Pontiac Sunfire Suspension Parts

When it comes to maintaining or upgrading your 2004 Pontiac Sunfire, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 2004 Pontiac Sunfire. With over 1 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49. Plus, with over 21 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $30.49

(21)

Suspension Control Arm Bushing

“my car was clunking and squeaking like crazy when i would hit bump or cracks in the road or when i would turn the wheels from side to side. The part i”

Popular Monroe 2004 Pontiac Sunfire Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2004 Pontiac Sunfire owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2004 Sunfire, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Monroe Suspension Parts range from $50.99 to $129.99, plus, with more than 33 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $119.99

(11)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

“Replaced my old strut that was making a loud popping noise when hitting bumps, not hard to do and fits and works well”

from $50.99

(8)

Gas-Matic Strut

“Product as advertised, no issues with fit or finish”

from $129.99

(14)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

“got this part today..looks like they are making it in the good ole USA now..because right on the box and stamped on the strut is “Made in USA”..looks ”

FAQs for 2004 Pontiac Sunfire Suspension Parts

Which Suspension Parts are best-sellers for 2004 Pontiac Sunfires?

Out of 35 Suspension Parts that fit 2004 Pontiac Sunfires, the following parts are the top sellers:

STRUT BOOT KIT (11049894) – $12.29
Suspension Control Arm Bushing (20516378) – $30.49
Strut Bellows (20518181) – $36.99

What’s the price range for 2004 Pontiac Sunfire Suspension Parts?

Suspension Part prices for the 2004 Pontiac Sunfire start at $12.29 and go up to $229.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2004 Pontiac Sunfire?

The average price for Suspension Parts for the 2004 Pontiac Sunfire is $65.84. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Pontiac Sunfire model years?

Yes, we currently carry Suspension Parts for 9 model years of Pontiac Sunfires between 1995 and 2005. Suspension Parts are bought most frequently for the following model years: 2005, 2003, 2002, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Suspension Parts for my 2004 Pontiac Sunfire?

The cheapest 2004 Pontiac Sunfire Suspension Parts we carry in stock are:

STRUT BOOT KIT (11049894) – $12.29
Control Arm Bushing (10903498) – $16.99
Suspension Control Arm Bushing Kit (20516655) – $19.49
Suspension Control Arm Bushing Kit (50212121) – $20.99
Suspension Control Arm Bushing (20516609) – $21.49

What are the top-rated Suspension Parts that fit the 2004 Pontiac Sunfire?

Out of 108 reviews by customers, our 2004 Pontiac Sunfire Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2004 Pontiac Sunfire and their top-rated products:

Shocks and Struts
- Gas-Matic Strut (18930168) – $50.99
- Gas-Matic Strut (5930190) – $60.99
- Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (99985892) – $129.99
Coil and Leaf Springs
- Gas-Matic Strut (18930168) – $50.99
- Gas-Matic Strut (5930190) – $60.99
- Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (99985892) – $129.99
Control Arms
- Gas-Matic Strut (18930168) – $50.99
- Gas-Matic Strut (5930190) – $60.99
- Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (99985892) – $129.99

What types of Suspension Parts do you sell for my 2004 Pontiac Sunfire?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2004 Pontiac Sunfire:

Can I get help with 2004 Pontiac Sunfire Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Suspension Parts and more.

What is your return policy for Pontiac Sunfire Suspension Parts?

Advance Auto Parts keeps returns simple. For new Pontiac Sunfire Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Pontiac Sunfire Suspension Parts

KYB – Jounce Bumper and Bellows (Part No.SB101)

Driveworks – STRUT BOOT KIT (Part No.DW-K90460)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Rare Parts – Strut Insulator (Part No.RP18836)

Rare Parts – Strut Insulator (Part No.RP18835)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Monroe – Gas-Matic Strut (Part No.81973)

Suncore – Complete Strut Assem (Part No.55S11150)

Suncore – Complete Strut Assem (Part No.55S15030)

Monroe – Gas-Matic Strut (Part No.81281)

Rare Parts – Strut Mount (Part No.RP18544)

Suncore – Quick Strut Kit (Part No.2-55S11150-001)

Suncore – Quick Strut Kit (Part No.2-55S15030-001)

MOOG – Suspension Control Arm Bushing (Part No.K6698)

Dorman – Suspension Control Arm Bushing (Part No.905-508)

Carquest Premium – CONTROL ARM BUSHING (Part No.223-83767)

MOOG – Suspension Control Arm Bushing (Part No.K200792)

Monroe – Quick-Strut Suspension Strut and Coil Spring Assembly (Part No.271973)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-713123)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.713123)

Carquest Premium – Complete Strut Assembly 18-818307: Includes Strut, Coil Spring and Mount (Part No.18-818307)

MOOG – Strut Bellows (Part No.K90460)

Monroe – Strut-Mate Suspension Strut Bumper and Bellows Kit (Part No.63619)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

GM Genuine Parts – Multi-Purpose Relay (Part No.15-81106)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Suncore – Quick Strut Kit (Part No.2-55S15030-001)

Suncore – Quick Strut Kit (Part No.2-55S11150-001)

MOOG – Suspension Control Arm Bushing (Part No.K6698)

MOOG – Suspension Control Arm Bushing (Part No.K200792)

Driveworks – Control Arm Bushing (Part No.DW-K6698)

Carquest Premium – CONTROL ARM BUSHING (Part No.223-83767)

Dorman – Suspension Control Arm Bushing (Part No.905-508)

MOOG – Suspension Control Arm Bushing (Part No.K6288)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6578)

Nolathane – Control Arm – Front Bushing (Part No.REV032.0054)

Rare Parts – CONTROL ARM BUSHING (Part No.RP18274)

Rare Parts – Control Arm Bushing (Part No.RP17853)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-473)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181281)

Carquest Premium – Complete Strut Assembly 18-818307: Includes Strut, Coil Spring and Mount (Part No.18-818307)

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.28-713123)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.818307)

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.713123)

Rare Parts – Strut Insulator (Part No.RP18835)

Rare Parts – Strut Insulator (Part No.RP18836)

Monroe – Gas-Matic Strut (Part No.81281)

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.182174)

Monroe – Gas-Matic Strut (Part No.81973)

Driveworks – STRUT BOOT KIT (Part No.DW-K90460)

KYB – Jounce Bumper and Bellows (Part No.SB101)

Monroe – Strut-Mate Suspension Strut Bumper and Bellows Kit (Part No.63619)

MOOG – Strut Bellows (Part No.K90460)

Suncore – Complete Strut Assem (Part No.55S15030)

Suncore – Complete Strut Assem (Part No.55S11150)

Rare Parts – Strut Mount (Part No.RP18544)