2004 Pontiac GTO Ignition and Tune-Up Products
More 2004 Pontiac GTO Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2004 Pontiac GTO, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2004 Pontiac GTO Ignition and Tune-Up Products
Carquest – A/C Compressor Connector (Part No.PT770)
from
$16.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Switch (Part No.CSA1066)
from
$32.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Spark Plug Wire Set (Part No.748RR)
from
$145.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)
from
$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
MSD Ignition – Wire Set; Red Super Conductor; Gen III LS-1/6 V8; Universal (Part No.32079)
from
$252.99
For GM Gen-III engines such as the LS1 or LS6, these wires are perfect when you relocate the coils. Both 90 degree and MA boots supplied.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap – Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size 90 Degree And Multi-Angled Boots Supplied
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Dorman – Help – Knock Sensor Grommet (Part No.42003)
from
$14.99
This ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability & reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles.
- Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
MSD Ignition – Wire Set; Super Conductor; Black; Universal LS-Series; Remote Coils (Part No.32073)
from
$242.99
For GM Gen-III engines such as the LS1 or LS6, these wires are perfect when you relocate the coils. Both 90 degree and MA boots supplied.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap – Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size 90 Degree And Multi-Angled Boots Supplied
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)
from
$22.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Dorman – Knock Sensor And Harness Kit (Part No.926-084)
from
$94.99
Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.
Product Features:
See More
Product Features:
- Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
- Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
- Quality assured – benchmarked against original components for performance and quality
- Excellent value – original equipment quality at significant cost savings
MSD Ignition – High-Performance LS Ignition Coils (8-Pack) (Part No.82628)
from
$658.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.
Product Features:
See More
Product Features:
- Replacement Coil
- Full One Year Warranty
Carquest Premium – Ignition Switch Connector (Part No.PTA1273)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
PerTronix – D7120701 Flame-Thrower Electronic Distributor Billet Pontiac V8 with Ignitor III Vacuum Advance Red Cap (Part No.D7120701)
from
$399.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor
Product Features:
See More
Product Features:
- PerTronix D7120701 Flame-Thrower Electronic Distributor Billet Pontiac V8 with Ignitor III Vacuum Advance Red Cap
- Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford
PerTronix – D1201 Flame-Thrower Distributor HEI Pontiac Small Block/Big Block Red Cap (Part No.D1201)
from
$328.99
STREET / STRIP HEI distributorsOur HEI distributors are built from the ground up with all new components. We have engineered a special high energy module and coil combination that operates without misfires beyond 7500 RPM. That’s nearly 3000 RPM higher t
Product Features:
See More
Product Features:
- PerTronix D1201 Flame-Thrower Distributor HEI Pontiac Small Block/Big Block Red Cap
- New lightweight aluminum alloy housing.
NGK – Spark Plug Wire Set: Ultra-low Resistance Magnetic Core, Lifetime Warranty (Part No.51379)
from
$22.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding over premium ferrite magnetic core delivers ultra-low resistance, a more powerful spark and excellent EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8128)
from
$48.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Ignition Coil Connector (Part No.PTC2277)
from
$83.99
Ignition Coil Connector
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5245)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
- Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance.
- Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience.
- Tapered Seat Type: Ensures a secure fit and optimal performance.
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT16TT (Part No.4713)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000┬░ Fahrenheit
- Iridium TT
- Advanced Twin-Tip Technology: Combines a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition and efficiency.
- Enhanced Fuel Economy and Lower Emissions: Designed to provide better fuel economy and reduced emissions, allowing you to drive around the Earth over 4 times.
- Original Equipment Specification: Developed from the Super Ignition Plug (SIP) design, ensuring reliable and consistent performance.
Edelbrock – LS Series Coil Covers in Black Finish (3-3/8" Overall Height) (Part No.41183)
from
$404.99
Edelbrock part #41183 is a Black powder coated coil cover designed for GM Gen III LS motors. Our covers will mount to LS series motors with stock center bolt style valve covers and accept stock Delphi coils with GM PN 12558948 or aftermarket replacement.
Product Features:
See More
Product Features:
- 3.375 in. Height
- Black Powder Coated Finish
- For GM Gen III LS1
- Cast Aluminum Material
- Made In The USA
Edelbrock – LS Series Coil Covers in Satin Finish (3-3/8" Overall Height) (Part No.4118)
from
$336.99
Edelbrock sand cast aluminum LS Series Coil Covers part #4118 are a great way to dress up the LS1 in your street rod or muscle car. These coil covers are designed to eliminate the stock mounting brackets on transplanted LS1 engines by way of fitting coils
Product Features:
See More
Product Features:
- 3.375 in. Height
- Satin Finish
- For GM Gen III LS1
- Cast Aluminum Material
- Made In The USA
ACDelco – Ignition Coil Wire (Part No.355S)
from
$126.99
ACDelco GM Original Equipment Ignition Coil Lead Wires are induction coils in a vehicle’s ignition system that send power from the battery through the spark plugs to ignite the fuel in the engine cylinders, and are GM-recommended replacements for your vehicle’s original components. These original equipment ignition coil lead wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Insulated to help protect the interior conductor wire
- Form fitting boots on each end prevent moisture from entering the coil or distributor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
MSD Ignition – LS 2-Step Launch Control; for GM LS Engines (Part No.8733)
from
$319.99
GM performance fans will be geeked to learn about this direct plug-in 2-Step Launch control. The unit is easy to install with factory style connectors for a splice-free installation. When you’re staged, you can hold the pedal to the floor while the rpm stays at a consistent level producing consistent launches.
Product Features:
See More
Product Features:
- 2 Step Rev Limiter for LSx engines
- Plug and Play
- Can Be Used w/24X Or 58X Trigger Wheels
Popular 2004 Pontiac GTO Ignition and Tune-Up Products Categories
2004 Pontiac GTO Ignition and Tune-Up Products
You count on your 2004 Pontiac GTO to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 76 Ignition and Tune-Up Products ranging in price from $2.99 to $991.99, you’re sure to find everything you need for your 2004 Pontiac GTO.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 18 different brands like ACDelco, NGK, and Autolite. 2004 Pontiac GTO Ignition and Tune-Up Products start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,246 extensive product reviews on 2004 Pontiac GTO Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration with 4.7 stars and DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2004 Pontiac GTO below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2004 Pontiac GTO
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Pontiac GTO running right for years to come. In our inventory you’ll find brands like ACDelco, NGK, Autolite, and even more.
Popular Accel Ignition and Tune-Up Products
You’ll find popular Accel brand products across Ignition Wires. All are waiting to get your 2004 Pontiac GTO back on the road. Some of the top-rated Accel products in these categories are:
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 2004 Pontiac GTO, and some of our most reviewed NGK parts include:
FAQs for 2004 Pontiac GTO Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2004 Pontiac GTO?
Out of 76 Ignition and Tune-Up Products for the 2004 Pontiac GTO, the most popular in our inventory are:
from
$11.99
This product is not rated
Iridium Spark Plug: Original Equipment Replacement
Spark Plugs
from
$9.99
This product is not rated
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
What are the top-rated 2004 Pontiac GTO Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2004 Pontiac GTO based on customer reviews/ratings are:
from
$3.49
(117)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Good seller”
