2004 Pontiac Aztek Wheels and Tires
More 2004 Pontiac Aztek Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2004 Pontiac Aztek, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2004 Pontiac Aztek Wheels and Tires
Carquest Premium – Hub Assembly with Wheel Bearing 91-259919: With Mounting Hardware (Part No.91-259919)
from
$139.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, Rear, 5 Studs, Metal clip (Part No.513179)
from
$161.99
Product Features:
See More
- GRIME DEFENSE OUTBOARD SEAL – Revolutionary seal helps prevent water, dirt and road grime from building up on assembly exterior and shields bearings from friction- and corrosion-causing moisture and grime
- KEEPS WATER AND DIRT OUT – Primary outboard and inboard seals help protect against damaging water, dirt and debris
- DAMAGE RESISTANCE – Molded grommet protects ABS cable from moisture contamination while the abrasion-resistant cable resists damage and vibration that may lead to premature wear.
- RELIABLE PERFORMANCE – Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- CORROSION PROTECTION – Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Dorman – Hub And Bearing Mounting Bolts, Pack of 3 (Part No.917-503)
from
$20.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
- Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
- Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
ACDelco – Front Wheel Hub and Bearing Assembly with Wheel Studs (Part No.FW304)
from
$234.99
ACDelco GM Original Equipment Wheel Hubs provide the attaching point for the brake rotor and road wheel, and are GM-recommended replacements for your vehicle’s original components. These wheel hubs are supported and allowed to rotate by the wheel bearing. These original equipment wheel hubs have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Provides the attaching point for the brake rotor and road wheel
- Supported and allowed to rotate by the wheel bearing
- GM OE bearing designs are dimensionally optimized to work with their mating parts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Driveworks – Wheel Hub Assembly (Part No.NT512237)
from
$46.49
Fully integrated mounting wheel flange
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Hub Bearing Assembly (Part No.4110309)
from
$94.99
To prevent damages to your spindle, wheels and hubs we offering replacement Wheel Bearing and Hub Assemblies. All our Wheel Bearing and Hub Assemblies are direct replacements for a proper fit.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Manufactured to strict engineering quality standards
- Replacement eliminates noises associated with original failure
- Axles also available, sold separately
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)
from
$462.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24012)
from
$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use under wheel covers, center caps and hub caps.
- Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Neon-Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-335G)
from
$63.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Red; Chrome, 20 Pack (Part No.713-385E)
from
$43.99
Upgrade the look of your wheel hardware with these racing-inspired lug nuts. Designed with an open end to accommodate long studs, these nuts are finished with a knurled texture for better grip when spinning them by hand. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Red Open End Knurled Wheel Nuts
- Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Red; Chrome, 20 Pack
- Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip
- Quality materials – made of tough steel for durability and positive tool contact
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome (Sold by each) (Part No.611-183)
from
$2.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Hex, 45.9 mm Length, Black, 20 Pack (Part No.712-345A)
from
$74.99
Complement your ride perfectly with these Dorman premium chrome lug nuts. They are vacuum nickel plated for incredible scratch resilience, thoroughly tested to resist corrosion for years, and uniquely designed for a custom racing style look. Enhance them even more with Dorman interchangeable colored aluminum wheel fastener caps, sold separately. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.
Product Features:
See More
Product Features:
- Wheel Nut M12-1.50 Racing Style
- Wheel Lug Nut: M12-1.50 Thread, Conical 60, Hex, 45.9 mm Length, Black, 20 Pack
- Exclusive design – these premium chrome wheel lug nuts feature an authentic racing style look emblazoned with the vintage Dorman logo
- Exceptional durability – vacuum nickel plating ensures long-term resistance to scratching and rust
Dorman – Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black, 5 Pack (Part No.711-022)
from
$18.29
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Dorman – Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black (Sold by each) (Part No.611-620)
from
$2.29
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Dorman – Pik-a-Nut – Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black, 1 Pack (Part No.99056.1)
from
$2.29
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Dorman – M12-1.50 Serrated Wheel Stud – 12.73mm Knurl, 41.5mm Length (Part No.610-254)
from
$3.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, M12-1.50 Thread Size, RHT, 1 Pack (Part No.98498.1)
from
$3.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 40 Pack (Part No.610-254.40)
from
$72.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 4 Pack (Part No.711-305)
from
$7.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut M12-1.50 Mag , Short – 13/16 In. Hex, 1.452 In. Length (Part No.611-104)
from
$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64002)
from
$24.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.406" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-341)
from
$40.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)
from
$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)
from
$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Popular 2004 Pontiac Aztek Wheels and Tires Categories
2004 Pontiac Aztek Wheels and Tires
You count on your 2004 Pontiac Aztek to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 126 Wheels and Tires ranging in price from $2.29 to $7,321.99, you’re sure to find everything you need for your 2004 Pontiac Aztek.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 12 different brands like Dorman, Autel, and Schrader. 2004 Pontiac Aztek Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,446 extensive product reviews on 2004 Pontiac Aztek Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars and Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.375 in Length, Chrome, 4 Pack with 4.2 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2004 Pontiac Aztek below to get started!
Top-Rated Wheels and Tires Brands For Your 2004 Pontiac Aztek
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Pontiac Aztek running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.
Popular MOOG Hub Assemblies Wheels and Tires
You’ll find popular MOOG Hub Assemblies brand products across Wheel Bearings. All are waiting to get your 2004 Pontiac Aztek back on the road. Some of the top-rated MOOG Hub Assemblies products in these categories are:
from
$161.99
(232)
Wheel Bearing and Hub Assembly: Front, Rear, 5 Studs, Metal clip
Front Wheel Bearings
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 2004 Pontiac Aztek, and some of our most reviewed parts include:
FAQs for 2004 Pontiac Aztek Wheels and Tires
What are the most purchased Wheels and Tires for the 2004 Pontiac Aztek?
Out of 126 Wheels and Tires for the 2004 Pontiac Aztek, the most popular in our inventory are:
from
$2.29
This product is not rated
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (Sold by each)
Wheel Lug Nuts
from
$2.79
This product is not rated
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome (Sold by each)
Wheel Lug Nuts
What are the top-rated 2004 Pontiac Aztek Wheels and Tires?
Top-rated Wheels and Tires for your 2004 Pontiac Aztek based on customer reviews/ratings are:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
from
$8.29
(59)
Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.375 in Length, Chrome, 4 Pack
“Great product”
