from

$27.49

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Made in USA
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$41.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Application engineered media which aids in stripping water in diesel fuels
Patent pending drain, metal end caps, which hold media in place
Rust resistant can, ensuring no leakage from inside
Made in USA
Includes Standpipe
CAUTION: Furnished D-Ring must be installed on post for seal.

from

$59.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Contains Sensor Port Thread: M14 x 2.0;Standpipe
Includes Standpipe. Sensor Port Thread: M14 x 2.0
CAUTION: Furnished D-Ring must be installed on post for seal. NOT Interchangeable with 86604.

from

$106.99

This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:

Ideal replacement – this water-in-fuel (WiF) sensor matches the original equipment sensor’s function and performance
Durable construction – this sensor is made of durable materials to withstand exposure to diesel fuel
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life

from

$1092.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability..

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles.
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$59.99

This exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp on specified vehicles and is recommended for replacement during EGR cooler service. It is engineered from stainless steel for reliable service life.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp and is recommended for replacement during EGR cooler service
Ideal solution – engineered from stainless steel to withstand extreme heat and to resist corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1712.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1809.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$162.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$88.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$38.49

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$644.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$724.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$388.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$388.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$439.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$42.99

Dorman offers a variety of some of today’s most popular Multi-Purpose Sensors for measuring several types of temperature in the vehicle. Our direct replacement Multi-Purpose Sensor is ideal for measuring coolant and auto transmission temperature. Each replacement restores proper vehicle operation and provides a longer service life. Plus, these direct fit Sensors are affordable and easy to install.

Product Features:

Direct replacement for a proper fit every time
Replacement prevents any further damage to vehicle engine
No special tools required during installation
Thoroughly tested to meet product standards and quality

from

$39.49

Dorman offers a variety of some of today’s most popular Multi-Purpose Sensors for measuring several types of temperature in the vehicle. Our direct replacement Multi-Purpose Sensor is ideal for measuring coolant and auto transmission temperature. Each replacement restores proper vehicle operation and provides a longer service life. Plus, these direct fit Sensors are affordable and easy to install.

Product Features:

Direct replacement for a proper fit every time
Replacement prevents any further damage to vehicle engine
No special tools required during installation
Thoroughly tested to meet product standards and quality

from

$191.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$202.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$71.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience