2004 Mazda 6 Alternators and Starters

Essential 2004 Mazda 6 Alternators and Starters

Carquest Premium – Voltage Regulator (Part No.RAA1189)

Voltage Regulator

from

$293.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Voltage Regulator (Part No.RAC1215)

Voltage Regulator

from

$375.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Alternator: Remanufactured, 100 Amps (Part No.11168A)

Alternator: Remanufactured, 100 Amps

from

$260.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

Carquest Professional – Alternator: New, 110 Amps (Part No.11267AN)

Alternator: New, 110 Amps

from

$789.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • All new components are utilized to ensure long service life
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Regulators and rectifiers are 100% electronically load tested for reliable charging performance
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
  • Rotors and stators are load tested and double insulated for maximum charging performance
See More

OE+ – Alternator (Part No.F40002246711IAP)

Alternator

from

$270.70
Alternator

Dorman – Alternator Clutch Pulley (Part No.300-868)

Alternator Clutch Pulley

from

$90.99
This alternator pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this alternator pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Starter Solenoid (Part No.SBC1827)

Starter Solenoid

from

$169.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Lock Cylinder CSC3263 (Part No.CSC3263)

Ignition Lock Cylinder CSC3263

from

$387.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder CSC3274 (Part No.CSC3274)

Ignition Lock Cylinder CSC3274

from

$311.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder CSC3447 (Part No.CSC3447)

Ignition Lock Cylinder CSC3447

from

$513.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder CSC3446 (Part No.CSC3446)

Ignition Lock Cylinder CSC3446

from

$349.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Connector (Part No.PTA1011)

Connector

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

National – Bearings (Part No.303-CC)

Bearings

from

$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

OE+ – Remanufactured Starter (Part No.F50002246898IAP)

Remanufactured Starter

from

$151.43
When your vehicle needs a new starter, you need to treat your car right. Replace it with a Premium Quality remanufactured starter from OE+. All of our starters are completely remanufactured to meet or exceed O.E. specifications. The solenoid is completely remanufactured or replaced with new. The brush plate holder is cleaned and plated for corrosion prevention. The armature is tested and recoated. The commutator is remachined or replaced for proper brush contact. The drive is completely remanufactured or replaced. The gear is chamfer checked. All housings are cleaned and refinished to prevent corrosion.

Product Features:
  • OE-Equivalent Direct Fit Application.
  • Fully tested to meet OE specifications.
  • Provides exceptional reliability.
See More

DENSO – Starter (Part No.F5000688580ND)

Starter

from

$324.45
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.

Product Features:
  • High-voltage tested armature and field coils to ensure reliable performance
  • Premium copper terminals to ensure a clean source of electrical current
  • All-new bearings, brushes, and seals
  • Maximum cranking torque under all conditions
  • Class leaders in size and weight
  • Environmentally designed to start in cold and hot weather conditions
See More

Carquest Premium – Starter Remanufactured Premium (Part No.17908S)

Starter Remanufactured Premium

from

$238.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • 100% remanufactured drive clutch assembly ensures lasting performance
  • Armatures and commutators are 100% load tested
  • New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Starter (Part No.17991S)

Starter

from

$201.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • 100% remanufactured drive clutch assembly ensures lasting performance
  • Armatures and commutators are 100% load tested
  • New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Professional – Starter-New (Part No.17598SN)

Starter-New

from

$223.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10256
See More

Bosch – Reman Starter (Part No.SR4245X)

Reman Starter

from

$292.99
Reman Starter

Carquest Premium – Starter Remanufactured Premium (Part No.19128S)

Starter Remanufactured Premium

from

$240.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • 100% remanufactured drive clutch assembly ensures lasting performance
  • Armatures and commutators are 100% load tested
  • New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

Carquest Premium – Starter Remanufactured Premium (Part No.52040S)

Starter Remanufactured Premium

from

$209.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

OE+ – Starter (Part No.F50002247319IAP)

Starter

from

$288.17
Starter

Carquest Professional – Starter-New (Part No.17991SN)

Starter-New

from

$302.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10409
See More

WAI – Starter – 100% NEW (Part No.17908N)

Starter - 100% NEW

from

$139.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

WAI – Starter – 100% NEW (Part No.19041N)

Starter - 100% NEW

from

$178.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

WAI – Starter – 100% NEW (Part No.17991N)

Starter - 100% NEW

from

$265.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components for the Rotating Electri

Product Features:
  • Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
  • Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
  • Armatures have precision machined and upgraded steel shaft for improved durability and performance.
  • Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
See More

DENSO – First Time Fit Starter, Remanufactured (Part No.F5000447442ND)

First Time Fit Starter, Remanufactured

from

$214.02
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.

Product Features:
  • High-voltage tested armature and field coils to ensure reliable performance
  • Premium copper terminals to ensure a clean source of electrical current
  • All-new bearings, brushes, and seals
  • Maximum cranking torque under all conditions
  • Class leaders in size and weight
  • Environmentally designed to start in cold and hot weather conditions
See More

Carquest Professional – Starter-New (Part No.17914SN)

Starter-New

from

$199.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10367
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
See More

2004 Mazda 6 Alternators and Starters

You count on your 2004 Mazda 6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 23 Alternators and Starters ranging in price from $25.99 to $443.99, you’re sure to find everything you need for your 2004 Mazda 6.

Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 7 different brands like Carquest Premium, WAI, and National. 2004 Mazda 6 Alternators and Starters start as low as $25.99!

One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 24 extensive product reviews on 2004 Mazda 6 Alternators and Starters.

Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 2004 Mazda 6 below to get started!

Top-Rated Alternators and Starters Brands For Your 2004 Mazda 6

Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Mazda 6 running right for years to come. In our inventory you’ll find brands like Carquest Premium, WAI, National, and even more.

Popular Carquest Premium Alternators and Starters

You’ll find popular Carquest Premium brand products across Alternator Parts and Starter Parts. All are waiting to get your 2004 Mazda 6 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Alternator: Remanufactured, 110 Amps
from $244.99
(3)
Alternator: Remanufactured, 110 Amps
Alternators
Starter Remanufactured Premium
from $132.99
(8)
Starter Remanufactured Premium
Starters
Starter Remanufactured Premium
from $238.99
(4)
Starter Remanufactured Premium
Starters

Top-Rated Alternators and Starters


If are what you’re looking for, our inventory holds plenty. We stock brand Alternators and Starters for your 2004 Mazda 6, and some of our most reviewed parts include:
Alternator: Remanufactured, 90 Amps
from $222.99
(9)
Alternator: Remanufactured, 90 Amps
Alternators

FAQs for 2004 Mazda 6 Alternators and Starters

What are the most purchased Alternators and Starters for the 2004 Mazda 6?

Out of 23 Alternators and Starters for the 2004 Mazda 6, the most popular in our inventory are:
Connector
from $25.99
This product is not rated
Connector
Alternator Pigtails
Starter - 100% NEW
from $139.99
This product is not rated
Starter – 100% NEW
Starters
Bearings
from $26.49
This product is not rated
Bearings
Drive End Bearings