2004 Kia Amanti Fuel and Emissions Systems

Name: Mass Air Flow Sensor (MAF) - 100% NEW
Brand: Carquest Premium
SKU: MQ6239
Price: 144.99 USD

Below you will find various in-demand Kia Fuel and Emissions Systems, components and accessories for your 2004 Amanti. Advance Auto Parts has popular Amanti parts like Fuel Injectors, Gas Caps, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Amanti model years including 2005, 2006, 2007, 2008, 2009 and more. Select a category of 2004 Kia Amanti Fuel and Emissions Systems below and start saving instantly.

Popular 2004 Kia Amanti Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Temperature Sensors

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Canister Purge Solenoids

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Injector Gaskets

Fuel Injector Connectors

Mass Air Flow Sensor Connectors

EGR Valve Gaskets

Fuel Cap Tester Adapters

Emission Check Valves

Essential Fuel and Emissions Systems for 2004 Kia Amantis

from

$144.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$61.85

Oxygen Sensor

from

$67.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Made with high quality material and componentry
High quality construction for durability
Constructed to withstand an underhood environment
Application specific for this vehicle

from

$24.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$111.99

Fuel Temperature Sensor

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$74.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$14.49

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$53.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation.
Quality construction – manufactured from premium materials for a long service life.
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$4.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1.99

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$86.99

Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:

Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system.
Quality construction – manufactured from premium materials for a long service life.
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$72.97

The Original Equipment EGR valve is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment EGR valves are designed to handle high engine temperatures, ensuring long-term durability and optimal performance under all engine temperature operating ranges.

Product Features:

Meets federal emissions regulations
Increases fuel efficiency while eliminating the potential for malfunctions
Includes gaskets and required sealing components
Robust valve design provides carbon resistance, durability and long life, high quality and engine control module controllability

from

$55.99

from

$3.92

Throttle Body Gasket

from

$77.99

from

$46.99

from

$176.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$120.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$52.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$61.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$171.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles.
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection.
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

Upgrade your 2004 Kia Amanti with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2004 Kia Amanti, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Kia or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Amanti functioning at its best. At Advance Auto Parts, we offer a wide selection of 72 Fuel and Emissions Systems for the 2004 Kia Amanti, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2004 Kia Amanti at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.99 to $323.90, with an average price of $77.17. Our 72 Fuel and Emissions Systems in stock come from 22 trusted brands, so you’re sure to find the right part for your 2004 Kia Amanti without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Kia Amanti, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Carquest Premium, Delphi, and more. Bosch Fuel and Emissions Systems start at just $44.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $1.99, and at an average 4 stars rating. With 177 customer reviews and counting, our 2004 Kia Amanti Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Kia Amanti is always ready to roll. We’re committed to providing you with everything you need to keep your Amanti in top shape, all in one place. Start shopping confidently below for your 2004 Kia Amanti!

Best-Selling Fuel Injectors for 2004 Kia Amantis

Enhance the driving experience in your Kia with 20 quality Fuel Injector components, starting at $2.99.

show more show less

from

$4.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$21.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$202.99

Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light.

Product Features:

OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
100% new product
Not re-manufactured or rebuilt
Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
Can provide up to 20 percent better fuel consumption

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$49.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$144.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$323.90

Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:

OEM Quality Direct fit Application
Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
Extensive measuring range
Highly sensitive, particularly for small changes in flow rate
Wear-free since there are no moving parts
Insensitive to dirt and contamination
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$247.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$233.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$229.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$135.27

Air Mass Meter

from

$115.21

The Original Equipment brand is the same OEM quality and performance of the original equipment it replaces and is supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment fuel injectors are manufactured to OE requirements that meet federal emissions and fuel economy standards, and provide exact OE fit for ease of installation.

Product Features:

Original Equipment Manufacturer
Premium internal components
OE Calibrated impedance
Fine atomized spray reduces emissions

from

$67.99

Matches OE form, fit and function
Made with high quality material and componentry
High quality construction for durability
Constructed to withstand an underhood environment
Application specific for this vehicle

from

$65.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$64.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$48.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$4.29

from

$3.92

Throttle Body Gasket

from

$3.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

Most Popular 2004 Kia Amanti Gas Caps

Customize your Kia with 5 Gas Caps products like Gas Caps, all priced under $26.19.

show more show less

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$26.19

Stant locking gas caps are OEM quality both in construction and materials as well as deterrent to fuel theft and vandalism. A gas/fuel cap performs three very important functions; safety of the vehicle’s occupants, fuel economy and reduce emissions. Safety: Without a fuel cap, gasoline vapors will be present around your car at all times. Those vapors can be ignited by a random spark or flame and are very dangerous if you are involved in an accident or rollover. Fuel Economy: According to Sun Oil Company research, a vehicle with a missing or inoperative fuel cap will allow 176 pounds (22 gallons) of gasoline to evaporate over the period of one year. Emissions: Gasoline vapors emit hydrocarbons which dissolve the earth’s ozone layer and cause smog.

Product Features:

A quality locking mechanism deters fuel theft and vandalism
Original equipment performance and safety standards
OEM quality construction and materials
Replacing an old, leaky or missing gas cap can save as much as a gallon of gas every 15 days
A new gas cap can pay for itself in less than three months.

from

$21.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.49

None

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

Top Picks for 2004 Kia Amanti Fuel Pumps

Upgrade Kia Amantis with top-quality Fuel Pumps parts, including 12 OEM and aftermarket selections for your 2004 model.

show more show less

from

$92.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$57.99

Product Features:

All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
High-efficiency turbine technology provides quiet and precise fuel delivery

from

$14.49

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$67.99

New Platinum Pro Electric Fuel Pump, New Strainer Required For Warranty

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$136.09

Delphi Automotive Turbine Fuel Pumps are a family of in-tank pumps designed to provide uninterrupted flow of fuel for gasoline and flexible fuel engines, providing reliability, high efficiency and excellent hot fuel delivery performance. Delphi T-23 Automotive Turbine Fuel Pumps provide excellent low-fuel delivery performance for reliable, uninterrupted fuel flow. They help reduce evaporative emissions because they generate low heat and vapors.

Product Features:

Proven in-field performance in global applications
Flexibility to adjust product features and performance to suit customer needs through selection of armature windings, pump section configuration, and component features
Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel, with blends up to E100
Highly integrated design for lower overall cost
Compact 39mm diameter that enables excellent packaging flexibility
Robust durability with dry run capability
Exceptional low voltage startability

from

$162.99

The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

OE-Equivalent and direct fit for easy installation.
OE connections and fittings.
The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
Ultra-high balanced armature to minimize noise and vibration.
High pressure check valve provides superior hot fuel handling characteristics.
The brushes are designed for durability, efficiency, and low-resistance operation.
High quality relief valve to protect the fuel delivery system.

from

$21.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$176.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$63.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$24.99

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Oxygen Sensors for 2004 Kia Amantis

Select from 15 premium Oxygen Sensors parts for your 2004 Kia Amanti, with prices ranging from $44.99 to $133.22.

show more show less

from

$71.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$77.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$80.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$61.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$101.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$52.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$133.22

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$111.23

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$95.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$94.98

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$91.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$86.08

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$72.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$63.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$44.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

Most Sold 2004 Kia Amanti Air Flow Sensors

Explore our best-selling Kia parts for the 2004 Amanti among 6 OEM and aftermarket options starting from $16.79.

show more show less

from

$16.79

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$74.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$127.96

The FAE MAP sensor, absolute pressure of admission, detects the air pressure at the inlet of the vehicle and turns it into an electrical signal which is sent to the engine’s electronic control unit (ECU) in order to regulate the stoichiometric mixture. Some models do have a NTC type temperature sensor that allows the MAP to detect, not only the pressure, but also the air temperature at the inlet. This information is necessary for the ECU to calculate the mass of intake air in order to be able to adjust the air-fuel mixture. The sensor element of the MAP is a piezoresistive type configured as a Wheatstone bridge, – its electrical resistance varies according to the mechanical de- formation of a membrane.

Product Features:

The sensor element is integrated in a MEMS-type DIE which amplifies, performs a thermal compensation and conditions the signal
The incorporated digital electronics allow us to program the output signal
The DIE is mounted on a ceramic circuit and its electrical connections are made by bonding
Protected with a receptacle and a silicone gel
The electronic circuit is achieved through hybrid technology and is handled in a clean room due to its sensitive nature.

from

$99.04

MAP Sensor

from

$61.85

Oxygen Sensor

from

$58.99

Top-Rated Fuel and Emissions Systems Brands For Your 2004 Kia Amanti

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2004 Kia Amantis. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Carquest Premium, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 2004 Amanti start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2004 Kia Amanti Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2004 Kia Amanti, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2004 Kia Amanti. With over 7 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $44.99, with an average price of just $123.67. Plus, with over 88 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$61.99

This product is not rated

Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal

“”

from
$91.99

This product is not rated

Oxygen Sensor: 4 Wire, 22.05" Long, Heated, Exact Fit

“”

from
$323.9

This product is not rated

Air Mass Meter

“”

Popular Carquest Premium 2004 Kia Amanti Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2004 Kia Amanti owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2004 Amanti, Advance Auto Parts carries a full inventory of 20 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Kia in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $1.99 to $247.99, plus, with more than 67 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$144.99

This product is not rated

Mass Air Flow Sensor (MAF) – 100% NEW

“”

from
$11.49

This product is not rated

Keyed Alike Locking Fuel Cap

“”

from
$55.99

This product is not rated

Vapor Canister Vent Solenoid

“”

FAQs for 2004 Kia Amanti Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2004 Kia Amantis?

Out of 72 Fuel and Emissions Systems that fit 2004 Kia Amantis, the following parts are the top sellers:

Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481518) – $14.99
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (11410320) – $61.99
Tethered Fuel Cap (12102513) – $21.99

What’s the price range for 2004 Kia Amanti Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2004 Kia Amanti start at $1.99 and go up to $323.90 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2004 Kia Amanti?

The average price for Fuel and Emissions Systems for the 2004 Kia Amanti is $77.17. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Kia Amanti model years?

Yes, we currently carry Fuel and Emissions Systems for 5 model years of Kia Amantis between 2005 and 2009. Fuel and Emissions Systems are bought most frequently for the following model years: 2009, 2008, 2007, 2006, and 2005.

What are the cheapest Fuel and Emissions Systems for my 2004 Kia Amanti?

The cheapest 2004 Kia Amanti Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12481968) – $1.99
Fuel Injection Throttle Body Mounting Gasket (20688429) – $2.99
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (11906761) – $3.29
EGR Valve Gasket (12581109) – $3.32
Throttle Body Gasket (10810585) – $3.92

What are the top-rated Fuel and Emissions Systems that fit the 2004 Kia Amanti?

Out of 177 reviews by customers, our 2004 Kia Amanti Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2004 Kia Amanti and their top-rated products:

Oxygen Sensors
- Switching Oxygen Sensor: 4 Wire, 16.75" Long, Heated, Direct Fit (20501460) – $71.99
- Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (19370039) – $77.99
- Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (20472100) – $80.99
Vapor Canister Purge Valves
- Switching Oxygen Sensor: 4 Wire, 16.75" Long, Heated, Direct Fit (20501460) – $71.99
- Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (19370039) – $77.99
- Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (20472100) – $80.99

What types of Fuel and Emissions Systems do you sell for my 2004 Kia Amanti?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2004 Kia Amanti:

Can I get help with 2004 Kia Amanti Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Kia Fuel and Emissions Systems and more.

What is your return policy for Kia Amanti Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Kia Amanti Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Kia Amanti Fuel and Emissions Systems

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6239)

Bosch – Oxygen Sensor (Part No.C50101453106BOS)

Beck/Arnley – Fuel Injection Pressure Regulator (Part No.158-0715)

Carquest Premium – Power Window Relay (Part No.RAA2621)

Carquest Premium – Fuel Temperature Sensor (Part No.FTA1009)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Carquest Premium – Fuel Cap (Part No.10842)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1169)

Delphi – Fuel Pump Strainer (Part No.FS0199)

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-803)

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1012)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3264)

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-805)

Original Equipment – Exhaust Gas Recirculation (EGR) Valve (Part No.B7010185228OEA)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.EGC1058)

Keukdong – Throttle Body Gasket (Part No.C7001243471KEU)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1169)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1073)

Carquest Premium – Fuel Pump Module Assembly M2520960: Fuel Pump, Sending Unit and Strainer (Part No.M2520960)

Delphi – Electric Fuel Pump: 12V, In Tank, Turbine Design (Part No.FE0708)

NTK – Switching Oxygen Sensor: 4 Wire, 12.5" Long, Heated, Direct Fit (Part No.25151)

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-812)

Carquest – Fuel Injector Connector (Part No.PT2318)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 95008)

Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218090)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61416)

Carquest – Fuel Injector (Part No.67271)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6239)

Bosch – Air Mass Meter (Part No.B3130268102BOS)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7379)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-10092)

Delphi – Mass Air Flow Sensor (Part No.AF10162)

Vemo – Air Mass Meter (Part No.B3130268102VMO)

Original Equipment – Fuel Injector (Part No.C1000578789OEA)

Beck/Arnley – Fuel Injection Pressure Regulator (Part No.158-0715)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10551)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1191)

Carquest Premium – Reman Multi Port Fuel Injector (Part No.A212-2564)

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Keukdong – Throttle Body Gasket (Part No.C7001243471KEU)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)

Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)

Carquest Premium – Locking Fuel Cap: 10595, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10595)

Stant – Locking Fuel Cap (Part No.E201032816STN)

Motorad – Tethered Fuel Cap (Part No.MGC825T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17595)

Delphi – Electric Fuel Pump: With Hose Clamps, Hose Piece, Isolator, Pall Nut (Part No.FE0351)

Carquest Premium – Electric Fuel Pump (Part No.E8335)

Delphi – Fuel Pump Strainer (Part No.FS0199)

KAI – Electric Fuel Pump (Part No.FMD010095)

Delphi – Automotive Turbine Fuel Pump (Part No.E30001453972DEL)

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000334268ND)

Carquest Premium – Fuel Pump Strainer FS1521178 (Part No.FS1521178)

Carquest Premium – Fuel Pump Module Assembly M2520960: Fuel Pump, Sending Unit and Strainer (Part No.M2520960)

Spectra Premium – Fuel Pump (Part No.SP1126)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Power Window Relay (Part No.RAA2621)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

NTK – Switching Oxygen Sensor: 4 Wire, 16.75" Long, Heated, Direct Fit (Part No.25158)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

NTK – Switching Oxygen Sensor: 4 Wire, 28.25" Long, Heated, Direct Fit (Part No.25162)

NTK – Switching Oxygen Sensor: 4 Wire, 12.5" Long, Heated, Direct Fit (Part No.25151)

NTK – NTK Oxygen Sensor (Part No.C5010316601NTK)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010690139ND)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 20.87" Long, Heated, Exact Fit (Part No.234-4199)

NTK – NTK Oxygen Sensor (Part No.C5010299290NTK)

Bosch – Oxygen Sensor: 4 Wire, 22.05" Long, Heated, Exact Fit (Part No.13774)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010690137ND)

DENSO – Oxygen Sensor: 4 Wire, 16.93" Long, Heated, Exact Fit (Part No.234-4194)

DENSO – Oxygen Sensor: 4 Wire, 10.91" Long, Heated, Exact Fit (Part No.234-4435)

Bosch – Oxygen Sensor: 4 Wire, 12.6" Long, Heated, Exact Fit (Part No.13753)