2004 Jeep Wrangler Drivetrains

Essential 2004 Jeep Wrangler Drivetrains

USA Standard Gear – Install Kit Package For Non-Rubicon Jeep JK, 5.13 Ratio (Part No.40013)

Install Kit Package For Non-Rubicon Jeep JK, 5.13 Ratio

from

$1391.99
This is a complete package that includes front & rear ring & pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front & rear differential in one easy part number.

Product Features:
  • Fits Jeep non-Rubicon JK
  • 5.13 ratio
  • Includes front and rear ring & pinion sets and master overhaul kits
See More

Yukon Gear – Replacement Standard Open Loaded Carrier For Liberty Dana 30, 3.73 & Up (Part No.20058)

Replacement Standard Open Loaded Carrier For Liberty Dana 30, 3.73 & Up

from

$379.99
Yukon replacement standard open loaded carrier for Liberty Dana 30, 3.73 & up.

Product Features:
  • Standard open carrier case
  • Includes spider gears
  • Fits Jeep Liberty front
  • 3.73 and up ratio only
See More

USA Standard Gear – 4340 Chrome Moly Axle Shaft, Righthand Inner For TJ & XJ, 30 Spline, Uses 5-760X U/Joint (Part No.35075)

4340 Chrome Moly Axle Shaft, Righthand Inner For TJ & XJ, 30 Spline, Uses 5-760X U/Joint

from

$298.99
Product Features:
  • 30 spline
  • 32.28″ long
  • Fits Dana Spicer 30 in XJ, YJ and TJ
  • Right hand inner
  • 5-760X U-joint size
  • 4340 Chromoly
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R30RMK)

Differential Master Bearing Kit - Koyo

from

$118.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • DANA-30 JEEP BEARING MASTER KIT 66-90
See More

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

O-Ring For Toyota & Dana 44 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 44 and Toyota 8″ and V6
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

Rugged Ridge – Heavy Duty Differential Cover (Part No.16595.44)

Heavy Duty Differential Cover

from

$271.99
Made from either 3/8 inch cast steel or 5/16 inch stamped steel, these heavy-duty covers are designed to protect your differential and all its working parts for as long as you own your vehicle.

Product Features:
  • Painted Black Inside and Out
  • 3/8 in. Cast Steel
  • Reinforced Protection For Fill Plug
  • Hardware Included
  • Limited 5 Year Warranty
See More

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Part No.05177)

Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm

from

$11.79
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

Yukon Gear – Replacement Inner Axle Seal For Dana 30 (Part No.30141)

Replacement Inner Axle Seal For Dana 30

from

$16.99
Replacement Inner axle seal for Dana 30, 2.125″ OD.Yukon Mighty seal.

Product Features:
  • Front inner axle seal
  • Fits Dana Spicer 30
See More

Yukon Gear – Pinion Install Kit For Dana 30 Reverse Rotation Differential For Use With ’07+ JK Only (Part No.13097)

Pinion Install Kit For Dana 30 Reverse Rotation Differential For Use With '07+ JK Only

from

$238.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 30 JK
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Omix – Axle Shaft Bearing/Cup Kit (Part No.16536.05)

Axle Shaft Bearing/Cup Kit

from

$76.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rear
  • With Retainer
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Omix – Transfer Case Shift Fork Pad Set (Part No.18676.24)

Transfer Case Shift Fork Pad Set

from

$20.99
Is your NP231 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the NP231 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Trac Loc Disc Kit (Part No.16508.11)

Trac Loc Disc Kit

from

$177.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • With Trac-lock
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Yukon Gear – Drive Shaft – Rear (Part No.45020)

Drive Shaft - Rear

from

$1201.99
Drive Shaft – Rear

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Ppinion Nut 7/8-20 Thread, 1 1/8 Socket

from

$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:
  • Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
  • 7/8″ x 20 thread
  • 1 1/8″ socket
See More

Spartan – Drive Axle Assembly; Jeep W 97-02 DANA 35 NO-A (Part No.RAX1883C)

Drive Axle Assembly; Jeep W 97-02 DANA 35 NO-A

from

$1774.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Yukon Gear – Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter (Part No.33320)

Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter

from

$5.99
Model 35 roll pin for cross pin shaft, 0.190″ DIA.

Product Features:
  • Roll pin
  • Fits AMC Model 35
See More

MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)

Double Cardan CV H Yoke

from

$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

National – Bearings (Part No.206)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Omix – Axle CV Boot Kit (Part No.16527.30)

Axle CV Boot Kit

from

$42.99
Is your Jeep’s CV axle boot cracked or torn? If so, the grease will become contaminated and the CV joint will eventually fail. Replacing the CV boot as soon as possible to protect the CV joint and save a major expense. Omix-ADA offers high quality replace

Product Features:
  • Rubber
  • Front
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size (Part No.090-062CD)

Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size

from

$8.99
This differential cover plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.206-FF)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 30 JK & Dana 44, Jeep JK Rubicon (Part No.21684)

4340 Chrome-Moly Replacement Outer Stub For Dana 30 JK & Dana 44, Jeep JK Rubicon

from

$219.99
Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits Jeep JK Rubicon front
  • 4340 Chromoly
  • Outer stub
  • 32 spline
  • 6.3″ from end of splines to center of u-joint bore
See More

Yukon Gear – Replacement Pinion Flange For Dana 44 JK, 24 Spline (Part No.41122)

Replacement Pinion Flange For Dana 44 JK, 24 Spline

from

$324.99
Yukon replacement pinion flange for Dana 44 JK, 24 spline. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Jeep JK rear
  • 24 spline
See More

Omix – Transfer Case Vacuum Switch (Part No.18676.14)

Transfer Case Vacuum Switch

from

$106.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Popular 2004 Jeep Wrangler Drivetrains Categories

2004 Jeep Wrangler Drivetrains

You count on your 2004 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 706 Drivetrains ranging in price from $1.49 to $2,579.99, you’re sure to find everything you need for your 2004 Jeep Wrangler.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 28 different brands like Moog, DriveWorks, and Spicer. 2004 Jeep Wrangler Drivetrains start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,574 extensive product reviews on 2004 Jeep Wrangler Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Ring and Pinion Set with 3.8 stars and Greaseable Super Strength Universal Joint with 4.2 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2004 Jeep Wrangler below to get started!

Top-Rated Drivetrains Brands For Your 2004 Jeep Wrangler

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.

Popular Crown Auto Jeep Replacmnt Drivetrains

You’ll find popular Crown Auto Jeep Replacmnt brand products across Differentials. All are waiting to get your 2004 Jeep Wrangler back on the road. Some of the top-rated Crown Auto Jeep Replacmnt products in these categories are:

FAQs for 2004 Jeep Wrangler Drivetrains

What are the most purchased Drivetrains for the 2004 Jeep Wrangler?

Out of 706 Drivetrains for the 2004 Jeep Wrangler, the most popular in our inventory are:
Universal Joint
from $20.29
(52)
Universal Joint
U-Joints
Universal Joint
from $20.49
(33)
Universal Joint
U-Joints
Universal Joint
from $24.79
(65)
Universal Joint
U-Joints

What are the top-rated 2004 Jeep Wrangler Drivetrains?

Top-rated Drivetrains for your 2004 Jeep Wrangler based on customer reviews/ratings are:
Differential Ring and Pinion Set
from $283.99
(253)
Differential Ring and Pinion Set
“It was very easy to use and worked great. It looks a little darker than my car but not to noticeable on the spots I fixed up.”
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“works great !!!”
Greaseable Super Strength Universal Joint
from $47.99
(39)
Greaseable Super Strength Universal Joint
“Great”