2004 International 9900I Fuel and Emissions Systems

Below you will find various in-demand International Fuel and Emissions Systems, components and accessories for your 2004 9900I. Advance Auto Parts has popular 9900I parts like Exhaust Gas Recirculation (EGR) Parts, Fuel Pumps, Fuel Tanks and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 9900I model years including 2009, 2010, 2011, 2013, 2014, 2015, 2016, 2017, 2018 and more. Select a category of 2004 International 9900I Fuel and Emissions Systems below and start saving instantly.

Popular 2004 International 9900I Fuel and Emissions Systems Categories

Manifold Air Pressure Sensors

Fuel and Water Separators

Fuel Tank Sending Units

Diesel Emissions Fluid Filters

EGR Cooler Clamps

Essential Fuel and Emissions Systems for 2004 International 9900Is

from

$44.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Made in USA

from

$106.99

Carquest Diesel Exhaust Fluid (DEF) Filters remove contaminants to ensure proper function of your vehicle’s Selective Catalytic Reduction (SCR) system.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Contains Plug and Filter Removal Tool

from

$539.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$439.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$439.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$59.99

This exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp on specified vehicles and is recommended for replacement during EGR cooler service. It is engineered from stainless steel for reliable service life.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp and is recommended for replacement during EGR cooler service.
Ideal solution – engineered from stainless steel to withstand extreme heat and to resist corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$169.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$637.99

Our EGR valves include a gasket for a complete repair. Plus, they are designed to withstand extreme heat and carbon build-up for a longer service life.

Product Features:

Direct replacement for a proper fit
Includes gasket for a tight seal
Helps reduce emissions to protect the environment
Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

from

$1092.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability..

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles..
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$1809.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications.
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$239.99

Tight seals are essential to proper EGR cooler operation. This EGR cooler gasket kit contains all the gaskets and seals required to ensure a solid repair. Made of quality materials, this kit is a direct replacement for original equipment parts.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application.
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$102.99

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application.
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$26.99

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
Made in USA

from

$143.99

This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles.
Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$131.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

Upgrade your 2004 International 9900I with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2004 International 9900I, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 9900I functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Fuel and Emissions Systems for the 2004 International 9900I, designed to meet your needs without breaking the bank. From Exhaust Gas Recirculation (EGR) Part replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2004 International 9900I at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $26.99 to $767.99, with an average price of $173.69. Our 10 Fuel and Emissions Systems in stock come from 3 trusted brands, so you’re sure to find the right part for your 2004 International 9900I without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2004 International 9900I is always ready to roll. We’re committed to providing you with everything you need to keep your 9900I in top shape, all in one place. Start shopping confidently below for your 2004 International 9900I!

Best-Selling Exhaust Gas Recirculation (EGR) Parts for 2004 International 9900Is

Enhance the driving experience in your International with 3 quality Exhaust Gas Recirculation (EGR) Part components, starting at $59.99.

show more show less

from

$102.99

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application.
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$637.99

Our EGR valves include a gasket for a complete repair. Plus, they are designed to withstand extreme heat and carbon build-up for a longer service life.

Product Features:

Direct replacement for a proper fit
Includes gasket for a tight seal
Helps reduce emissions to protect the environment
Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

from

$59.99

Direct replacement – this exhaust gas recirculation (EGR) cooler clamp is designed to match the fit of the original clamp and is recommended for replacement during EGR cooler service.
Ideal solution – engineered from stainless steel to withstand extreme heat and to resist corrosion
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top Picks for 2004 International 9900I Fuel Tanks

Upgrade International 9900Is with top-quality Fuel Tanks parts, including 2 OEM and aftermarket selections for your 2004 model.

show more show less

from

$131.99

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$169.99

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Fuel Injectors for 2004 International 9900Is

Select from 1 premium Fuel Injectors parts for your 2004 International 9900I.

show more show less

from

$767.99

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

Most Sold 2004 International 9900I Air Flow Sensors

Explore our best-selling International parts for the 2004 9900I among 1 OEM and aftermarket options starting from $143.99.

show more show less

from

$143.99

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles.
Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

FAQs for 2004 International 9900I Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2004 International 9900Is?

Out of 10 Fuel and Emissions Systems that fit 2004 International 9900Is, the following parts are the top sellers:

Fuel/Water Separator Element (10556402) – $26.99
Extra-Large, Extended-Mileage Fuel/Water Separator Element (10556575) – $44.99
Fuel Tank Strap (11208744) – $131.99

What’s the price range for 2004 International 9900I Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2004 International 9900I start at $26.99 and go up to $767.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2004 International 9900I?

The average price for Fuel and Emissions Systems for the 2004 International 9900I is $173.69. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other International 9900I model years?

Yes, we currently carry Fuel and Emissions Systems for 17 model years of International 9900Is between 2000 and 2018. Fuel and Emissions Systems are bought most frequently for the following model years: 2018, 2017, 2016, 2015, 2014, 2013, 2011, 2010, and 2009.

What are the cheapest Fuel and Emissions Systems for my 2004 International 9900I?

The cheapest 2004 International 9900I Fuel and Emissions Systems we carry in stock are:

Fuel/Water Separator Element (10556402) – $26.99
Extra-Large, Extended-Mileage Fuel/Water Separator Element (10556575) – $44.99
EGR Cooler V-Band Clamp (12102351) – $59.99
Heavy Duty Exhaust Gas Recirculation Cooler Gasket Kit (10837403) – $102.99
Carquest Diesel Exhaust Fluid Filter for SCR Systems (12005494) – $106.99

What types of Fuel and Emissions Systems do you sell for my 2004 International 9900I?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2004 International 9900I:

Can I get help with 2004 International 9900I Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Fuel and Emissions Systems and more.

What is your return policy for International 9900I Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new International 9900I Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 International 9900I Fuel and Emissions Systems

Carquest Premium – Extra-Large, Extended-Mileage Fuel/Water Separator Element (Part No.86651XE)

Carquest Premium – Carquest Diesel Exhaust Fluid Filter for SCR Systems (Part No.96679)

Cardone – Fuel Injector (Part No.2J-506)

Delphi – Fuel Injector (Part No.EX631766)

Delphi – Fuel Injector (Part No.EX631767)

Dorman – HD Solutions – EGR Cooler V-Band Clamp (Part No.904-5154)

Dorman – HD Solutions – Heavy Duty Fuel Sender (Part No.285-5103)

Dorman – HD Solutions – Heavy Duty EGR Valve (Part No.904-5001)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve (Part No.904-5098)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Kit (Part No.904-5024)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Gasket Kit (Part No.904-5009)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Gasket Kit (Part No.904-5007)

Carquest Premium – Fuel/Water Separator Element (Part No.86651)

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7107)

Dorman – HD Solutions – Fuel Tank Strap (Part No.578-5102)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Gasket Kit (Part No.904-5007)

Dorman – HD Solutions – Heavy Duty EGR Valve (Part No.904-5001)

Dorman – HD Solutions – EGR Cooler V-Band Clamp (Part No.904-5154)

Carquest Premium – Fuel/Water Separator Element (Part No.86651)

Carquest Premium – Extra-Large, Extended-Mileage Fuel/Water Separator Element (Part No.86651XE)

Dorman – HD Solutions – Fuel Tank Strap (Part No.578-5102)

Dorman – HD Solutions – Heavy Duty Fuel Sender (Part No.285-5103)

Cardone – Fuel Injector (Part No.2J-603)

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7107)