2004 Honda S2000 Performance and Racing Products
Find Your Specific 2004 Honda S2000 Performance and Racing Products
Below you will find various in-demand Honda Performance and Racing Products, components and accessories for your 2004 S2000. Advance Auto Parts has popular S2000 parts like Performance Air Intake Kits Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other S2000 model years including
2000,
2001,
2002,
2003,
2005,
2006,
2007,
2008,
2009 and more. Select a category of 2004 Honda S2000 Performance and Racing Products below and start saving instantly.
Popular 2004 Honda S2000 Performance and Racing Products Categories
Essential Performance and Racing Products for 2004 Honda S2000s
Energy Suspension – Sway Bar Bushing Set (Part No.16.5107R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
aFe POWER – Takeda Intake System (Part No.TM-1023B-D)
from
$469.99
Takeda Intake System
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.69-1040TWR)
from
$399.99
The K&N 69-1040TWR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda S2000 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-1040TWR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine’s throttle body for a guaranteed power gain. The intake tubes have an attractive textured red powder-coat finish that’s made to last. The cold-air intake system accommodates the factory air injection pump hose, crankcase vent hose and vacuum hose solenoid. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake uses the existing factory mounting points and commonly available tools for installation. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Takeda Intake System (Part No.TM-1023B-R)
from
$454.99
Takeda Intake System
Energy Suspension – Sway Bar Bushing Set (Part No.16.5117G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.63-3514)
from
$429.99
The K&N AirCharger 63-3514 air intake system replaces the restrictive factory air filter and air intake housing in some Honda S2000 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your S2000’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3514 air intake comes with a K&N high-flow air filter and a heat shield that installs into the previous air box space. The placement allows air to be directed through a custom molded intake tube into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-3514)
from
$349.99
The K&N 57-3514 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Honda S2000 models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your S2000’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3514 air intake comes with a K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor, crank case vent hose and, for certain vehicles, the air injection pump Vacuum hose and air control solenoid valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points and requires commonly available tools.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Upgrade your 2004 Honda S2000 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2004 Honda S2000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Performance and Racing Products are key to keeping your S2000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Performance and Racing Products for the 2004 Honda S2000, designed to meet your needs without breaking the bank.
From
Performance Air Intake Kit
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2004 Honda S2000 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $12.99 to $469.99, with
an average price of $283.49.
Our 6 Performance and Racing Products in stock come from 3 trusted brands, so you’re sure to find the right part for your 2004 Honda S2000 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Honda S2000, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, and more.
K&N Performance and Racing Products
start at just $349.99 and boast an impressive 5 stars average rating from customers.
With 8 customer reviews and counting, our 2004 Honda S2000 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 Honda S2000 is always ready to roll. We’re committed to providing you with everything you need to keep your S2000 in top shape, all in one place.
Start shopping confidently below for your 2004 Honda S2000!
Best-Selling Performance Air Intake Kits for 2004 Honda S2000s
Enhance the driving experience in your Honda with 4 quality Performance Air Intake Kit components, starting at $349.99.
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.69-1040TWR)
from
$399.99
The K&N 69-1040TWR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda S2000 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-1040TWR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine’s throttle body for a guaranteed power gain. The intake tubes have an attractive textured red powder-coat finish that’s made to last. The cold-air intake system accommodates the factory air injection pump hose, crankcase vent hose and vacuum hose solenoid. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake uses the existing factory mounting points and commonly available tools for installation. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-3514)
from
$349.99
The K&N 57-3514 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Honda S2000 models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your S2000’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3514 air intake comes with a K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor, crank case vent hose and, for certain vehicles, the air injection pump Vacuum hose and air control solenoid valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points and requires commonly available tools.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Takeda Intake System (Part No.TM-1023B-D)
from
$469.99
Takeda Intake System
aFe POWER – Takeda Intake System (Part No.TM-1023B-R)
from
$454.99
Takeda Intake System
Most Popular 2004 Honda S2000 Performance Steering Products
Customize your Honda with 2 Performance Steering Products products
like Performance Sway Bar Link Kits and
Performance Sway Bar Bushings, all
priced under $12.99.
Energy Suspension – Sway Bar Bushing Set (Part No.16.5107R)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.16.5117G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Top-Rated Performance and Racing Products Brands For Your 2004 Honda S2000
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2004 Honda S2000s. Below you’ll find some of our best rated Performance and Racing Products from K&N, and more. Performance and Racing Products from these brands that fit a 2004 S2000 start at just $349.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2004 Honda S2000 Performance and Racing Products
When it comes to maintaining or upgrading your 2004 Honda S2000, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2004 Honda S2000. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $349.99, with an average price of just $374.99. Plus, with over 8 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$399.99
$399.99
(1)
Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter
“An amazing product that is worth the money. I drive a Honda S2000 AP1 and the difference from the OEM air intake compared to the KN air intake was a s”
from
$349.99
$349.99
(7)
Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter
“K&N Fuel Injection Performance Kit Gen2 Air Intake Kit Review
I installed the K&N 57-3514 Fuel Injection Performance Kit Gen2 Air Intake Kit on my Ho”
FAQs for 2004 Honda S2000 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2004 Honda S2000s?
Out of 6 Performance and Racing Products that fit 2004 Honda S2000s, the following parts are the top sellers:
- Sway Bar Bushing Set (22907088) – $12.99
- Takeda Intake System (12586821) – $469.99
- Takeda Intake System (12586904) – $454.99
What’s the price range for 2004 Honda S2000 Performance and Racing Products?
Performance and Racing Product prices for the 2004 Honda S2000 start at $12.99 and go up to $469.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2004 Honda S2000?
The average price for Performance and Racing Products for the 2004 Honda S2000 is $283.49. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Honda S2000 model years?
What are the cheapest Performance and Racing Products for my 2004 Honda S2000?
The cheapest 2004 Honda S2000 Performance and Racing Products we carry in stock are:
- Sway Bar Bushing Set (22907088) – $12.99
- Sway Bar Bushing Set (22907112) – $12.99
- Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (17402724) – $349.99
- Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (22400572) – $399.99
- Takeda Intake System (12586904) – $454.99
What are the top-rated Performance and Racing Products that fit the 2004 Honda S2000?
Out of 8 reviews by customers, our 2004 Honda S2000 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2004 Honda S2000 and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (22400572) – $399.99
- Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (17402724) – $349.99
What types of Performance and Racing Products do you sell for my 2004 Honda S2000?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2004 Honda S2000:
Can I get help with 2004 Honda S2000 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Performance and Racing Products and more.
What is your return policy for Honda S2000 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Honda S2000 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
