2004 Honda Accord Exhaust Manifold and Headers

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52024. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2017 Honda Accord, 2015-2019 Honda CR-V, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-RDF-A00 and 18190-5A3-L00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:

• CARB approved / 50 state street legal
• Includes instructions and all necessary hardware
• Dyno tuned and tested for maximum performance
• Constructed of T409ss alloy with ceramic coating
• Improves throttle response with Increased hp and torque
• OEM replacement, direct bolt on installation

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

• Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
• Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
• Complete repair – includes all necessary gaskets and downpipe hardware
• Trustworthy design – built by industry leader in aftermarket manifolds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51741. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2010 Honda Odyssey, 2003-2007 Honda Accord, and more, this direct-fit catalytic converter also interchanges with OE parts 18190-RCA-L00 and 18290-RCA-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Catalytic Converter

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

• Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
• Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
• Complete repair – includes all necessary gaskets and downpipe hardware
• Trustworthy design – built by industry leader in aftermarket manifolds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51441. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2012 Honda Accord, 2009-2014 Acura TSX, and more, this direct-fit catalytic converter also interchanges with OE parts 18190-5J0-A00 and 18190-R40-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51898. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2020 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18280-5MJ-A00 and 18280-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Increased power and unleash a throaty growl, that’s what you can expect when you bolt on a set of DC Sports Ceramic 4-2-1 Headers. Crafted from ceramic coated T409 stainless steel, and engineered with equal length piping, the headers are designed and Dyno-tuned to deliver a maximum power increase across the RPM range, with major gains in low to mid-range. Perfect for street or track applications. Includes instructions and all hardware.

Product Features:

• Dyno tuned for maximum performance
• CNC machining delivers a perfect fit with no leaks
• Equal length piping enables more power across RPM range
• Constructed of T409ss alloy with ceramic coating
• CARB approved / 50 state street legal

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:

• CARB approved / 50 state street legal
• Includes instructions and all necessary hardware
• Dyno tuned and tested for maximum performance
• Constructed of T409ss alloy with ceramic coating
• Improves throttle response with Increased hp and torque
• OEM replacement, direct bolt on installation

DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:

• CARB approved / 50 state street legal
• Includes instructions and all necessary hardware
• Dyno tuned and tested for maximum performance
• Constructed of T409ss alloy with ceramic coating
• Improves throttle response with Increased hp and torque
• OEM replacement, direct bolt on installation

More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:

• Heat-shield may be included for protection of engine components where applicable
• Cast iron or stainless tubular construction protects against warping or cracking
• Leak-resistant for long-lasting performance
• A rigorous quality inspection has been undertaken to ensure product standards

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:

• CARB approved / 50 state street legal
• Includes instructions and all necessary hardware
• Dyno tuned and tested for maximum performance
• Constructed of T409ss alloy with ceramic coating
• Improves throttle response with Increased hp and torque
• OEM replacement, direct bolt on installation

DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:

• CARB approved / 50 state street legal
• Includes instructions and all necessary hardware
• Dyno tuned and tested for maximum performance
• Constructed of T409ss alloy with ceramic coating
• Improves throttle response with Increased hp and torque
• OEM replacement, direct bolt on installation