2004 GMC W3500 Forward Belts and Hoses

Name: Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.44" Diameter
Brand: Dayco
SKU: E71538
Price: 23.99 USD

Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 2004 W3500 Forward. Advance Auto Parts has popular W3500 Forward parts like Belt Tensioners, Radiator Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other W3500 Forward model years including 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008 and more. Select a category of 2004 GMC W3500 Forward Belts and Hoses below and start saving instantly.

Popular 2004 GMC W3500 Forward Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Essential Belts and Hoses for 2004 GMC W3500 Forwards

from

$23.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$28.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$115.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specially designed to resist collapse in a vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$0.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$33.49

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This unique pulley is designed for use on G.M. Air Conditioning tensioners. Litens recommends you consider replacing the entire tensioner (Litens P/N 999034) rather than just the tensioner pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$12.79

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides optimal performance at extremely high operating temperatures.
Crack, wear, oil, and heat resistant construction
A special compound ensures unmatched stability, load capacity and belt life.
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Troubleshooter for troubled drives
Designed to save your fleet’s money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$35.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$33.99

Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$23.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$18.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$34.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$55.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$33.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$45.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides optimal performance at prolonged extreme operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$25.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$40.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$34.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$24.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$41.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$13.79

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$179.99

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:

Optimized components, designed to offer maximum strength and durability.
Patented design provides superior belt alignment and tension for improved drive efficiency and life
The patented labyrinth seal prevents contamination of internal parts for maximum durability and life.
Long-life steel pulleys with dust guards to protect internal bearings from contamination
Double row bearings carry more load and last up to 3X longer than two individual bearings
Round torsion spring made of chrome-silicone for less fatigue than flat springs
Its patented damping mechanism provides maximum stability, reduces vibration and extends the life of the belt, tensioner and other components of the accessory belt drives

from

$54.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Includes installation instructions

from

$71.99

For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:

Designed to prevent fluctuations to the tensioner body for longer service life
Reduces the risk of noise and helps avoid housing separation
Includes pulleys with lubricated bearings for longer lasting performance
Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

from

$61.99

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

from

$48.49

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

Upgrade your 2004 GMC W3500 Forward with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2004 GMC W3500 Forward, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your W3500 Forward functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Belts and Hoses for the 2004 GMC W3500 Forward, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2004 GMC W3500 Forward at great prices. Our Belts and Hoses inventory for this model ranges from just $0.99 to $115.99, with an average price of $36.14. Our 35 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 2004 GMC W3500 Forward without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 GMC W3500 Forward, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, Gates, and more. Litens Belts and Hoses start at just $24.99 and boast an impressive 4.7 stars average rating from customers. Dayco and Gates also bring quality to the table, with Belts and Hoses available starting at $31.99, and at an average 4.5 stars rating. With 1,753 customer reviews and counting, our 2004 GMC W3500 Forward Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 GMC W3500 Forward is always ready to roll. We’re committed to providing you with everything you need to keep your W3500 Forward in top shape, all in one place. Start shopping confidently below for your 2004 GMC W3500 Forward!

Best-Selling Belt Tensioners for 2004 GMC W3500 Forwards

Enhance the driving experience in your GMC with 5 quality Belt Tensioner components, starting at $48.49.

show more show less

from

$54.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Includes installation instructions

from

$48.49

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$49.49

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular G.M./Isuzu/Hummer tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*O..E Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: The dust shield (pulley washer) has been a modified for this aftermarket part. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 Hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$56.99

This genuine Litens tensioner is manufactured and designed by Litens, the world’s largest manufacturer of belt tensioners. To address shortcomings and common failure points of the original tensioner, Litens has released this new and improved design. A 20% increase in tension results in less noise and belt slip. The main tensioner pivot has been greatly improved to prevent binding frequently experienced with the original part, and a high speed bearing has been implemented to provide long life and reliability. While the appearance is slightly different from the original equipment part, the Litens part meets, and in most cases exceeds, GM’s original form, fit, and function specifications. Note: This drive has experienced issues due to the A/C system. GM issued a Technical Service Bulletin (TSB #01139B/C) suggesting replacement of the A/C compressor to resolve belt jumps and flutter issues). Litens includes a Tech-Tip concerning this issue with the tensioner. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included.

from

$61.99

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

Top Picks for 2004 GMC W3500 Forward Serpentine and V Belts

Upgrade GMC W3500 Forwards with top-quality Serpentine and V Belts parts, including 15 OEM and aftermarket selections for your 2004 model.

show more show less

from

$25.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$55.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$49.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$38.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$31.99

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$4.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$16.79

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$21.99

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$45.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$45.99

The patented material provides optimal performance at extremely high operating temperatures.
Crack, wear, oil, and heat resistant construction
A special compound ensures unmatched stability, load capacity and belt life.
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Troubleshooter for troubled drives
Designed to save your fleet’s money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$44.99

The patented material provides optimal performance at extremely high operating temperatures.
Construction that resists cracking, wear, oil and heat
A special compound ensures unmatched stability, load capacity and belt life.
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for failed disks
Designed to save your fleet money and reduce downtime
Meets RMA oil and heat resistance standards and static conductivity requirements

from

$35.99

The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$26.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
Resistant to oil, heat, ozone, weathering, and aging for better belt life.
Meets or exceeds SAE J636C specifications

from

$24.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

In-Demand Pulleys for 2004 GMC W3500 Forwards

Select from 8 premium Pulleys parts for your 2004 GMC W3500 Forward, with prices ranging from $12.79 to $73.99.

show more show less

from

$33.49

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$31.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$34.99

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$24.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.99

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$73.99

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the G.M. Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is supplied with a new integrated bolt/dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$25.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$12.79

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 2004 GMC W3500 Forward Heater Hoses

Explore our best-selling GMC parts for the 2004 W3500 Forward among 1 OEM and aftermarket options starting from $0.99.

show more show less

from

$0.99

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

Top-Rated Belts and Hoses Brands For Your 2004 GMC W3500 Forward

Shop for the best-rated brands offering Belts and Hoses and other products for your 2004 GMC W3500 Forwards. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Gates, and more. Belts and Hoses from these brands that fit a 2004 W3500 Forward start at just $24.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2004 GMC W3500 Forward Belts and Hoses

When it comes to maintaining or upgrading your 2004 GMC W3500 Forward, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2004 GMC W3500 Forward. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99, with an average price of just $31.16. Plus, with over 114 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $33.49

(26)

Tensioner Pulley: Direct Fit, Steel, 60mm Diameter

“Easy to install works great”

from $24.99

(49)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter

“OK”

from $34.99

(39)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

“Perfect fit and quite!!”

Popular Dayco 2004 GMC W3500 Forward Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2004 GMC W3500 Forward owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2004 W3500 Forward, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dayco Belts and Hoses range from $31.99 to $55.99, plus, with more than 813 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $38.49

(288)

Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count

“Install it per manufacturer instructions.”

from $55.99

(9)

Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set

“Seems well made. No problems installing. Belt and tensioner works as expected.”

from $31.99

(516)

Idler Pulley, Dayco

“Perfect fit”

FAQs for 2004 GMC W3500 Forward Belts and Hoses

Which Belts and Hoses are best-sellers for 2004 GMC W3500 Forwards?

Out of 35 Belts and Hoses that fit 2004 GMC W3500 Forwards, the following parts are the top sellers:

Automatic Belt Tensioner (15130030) – $54.99
Automatic Belt Tensioner (15130033) – $48.49
Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $34.99

What’s the price range for 2004 GMC W3500 Forward Belts and Hoses?

Belts and Hose prices for the 2004 GMC W3500 Forward start at $0.99 and go up to $115.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2004 GMC W3500 Forward?

The average price for Belts and Hoses for the 2004 GMC W3500 Forward is $36.14. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other GMC W3500 Forward model years?

Yes, we currently carry Belts and Hoses for 12 model years of GMC W3500 Forwards between 1995 and 2008. Belts and Hoses are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2003, 2002, 2001, 2000, and 1999.

What are the cheapest Belts and Hoses for my 2004 GMC W3500 Forward?

The cheapest 2004 GMC W3500 Forward Belts and Hoses we carry in stock are:

Straight Heater Hose; EPDM Rubber, 5/16 Inch Diameter (sold by foot) (10844621) – $0.99
Automotive V-Belt, Driveworks (10065174) – $4.29
Idler Pulley (Pulley only) (10040953) – $12.79
Bottom Cog V-Belt; 42 Inch Long, Exact Fit Premium Quality (19270479) – $16.79
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter (10062994) – $17.79

What are the top-rated Belts and Hoses that fit the 2004 GMC W3500 Forward?

Out of 1,753 reviews by customers, our 2004 GMC W3500 Forward Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2004 GMC W3500 Forward and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (3340023) – $25.99
- FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (10495383) – $49.99
- Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (11579415) – $55.99
Belt Tensioners
- Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (3340023) – $25.99
- FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (10495383) – $49.99
- Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (11579415) – $55.99

What types of Belts and Hoses do you sell for my 2004 GMC W3500 Forward?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2004 GMC W3500 Forward:

Can I get help with 2004 GMC W3500 Forward Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.

What is your return policy for GMC W3500 Forward Belts and Hoses?

Advance Auto Parts keeps returns simple. For new GMC W3500 Forward Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 GMC W3500 Forward Belts and Hoses

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.44" Diameter (Part No.E71538)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.50" Long, 1.50" Diameter (Part No.E72037)

Gates – Premium Molded Coolant Hose (Part No.23095)

Dayco – Straight Heater Hose; EPDM Rubber, 5/16 Inch Diameter (sold by foot) (Part No.80258)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38006)

Litens – Tensioner Pulley: Direct Fit, Steel, 60mm Diameter (Part No.900367A)

Dorman – Idler Pulley (Pulley only) (Part No.419-603)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9420HD)

Gates – Automotive XL High Capacity V-Belt (Part No.9650)

Gates – Automotive XL High Capacity V-Belt (Part No.9610)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.44" Diameter (Part No.E72041)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.50" Long, 1.50" Diameter (Part No.E70729)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.28" Diameter (Part No.E72193)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5040378K1)

Dayco – Poly Rib Belt Serpentine Belt; 40.5 Long, 7 Rib Count (Part No.5070405)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060994HD)

Driveworks – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.378K4)

Driveworks – Poly Rib Belt Serpentine Belt; 101 Long, 6 Rib Count (Part No.1010K6)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900027A)

Dayco – Idler Pulley, Dayco (Part No.89009)

Dayco – Idler Pulley, Dayco (Part No.89017)

Dorman – Idler Pulley (Pulley only) (Part No.419-610)

Gates – FleetRunner Heavy-Duty Automatic Belt Drive Tensioner (Part No.38528)

Dayco – Automatic Belt Tensioner (Part No.89253)

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89425)

Gates – DriveAlign« Automatic Belt Drive Tensioner (Part No.38158)

Dayco – Automatic Belt Tensioner (Part No.89258)

Dayco – Automatic Belt Tensioner (Part No.89253)

Dayco – Automatic Belt Tensioner (Part No.89258)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999033A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999034A)

Gates – DriveAlign« Automatic Belt Drive Tensioner (Part No.38158)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.44" Diameter (Part No.E71538)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.44" Diameter (Part No.C72040)

Gates – Premium Molded Coolant Hose (Part No.23096)

Gates – Premium Molded Coolant Hose (Part No.23095)

Driveworks – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.378K4)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5040378K1)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K040378HD)

Dayco – Poly Rib Belt Serpentine Belt; 37.8 Long, 4 Rib Count (Part No.5040378)

Dayco – Poly Rib Belt Serpentine Belt; 99.5 Long, 6 Rib Count (Part No.5060995)

Driveworks – V-Ribbed Belt, Driveworks (Part No.995K6)

Driveworks – Automotive V-Belt, Driveworks (Part No.42017)

Dayco – Bottom Cog V-Belt; 42 Inch Long, Exact Fit Premium Quality (Part No.17420)

Dayco – Bottom Cog V-Belt; 62 Inch Long, Exact Fit Premium Quality (Part No.17620)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060994HD)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9420HD)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9620HD)

Gates – Automotive XL High Capacity V-Belt (Part No.9420)

Gates – Automotive XL High Capacity V-Belt (Part No.9620)

Gates – Micro-V Serpentine Drive Belt (Part No.K040378)

Litens – Tensioner Pulley: Direct Fit, Steel, 60mm Diameter (Part No.900367A)

Dayco – Idler Pulley, Dayco (Part No.89006)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Idler Pulley, Dayco (Part No.89009)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900027A)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900401A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38009)

Dorman – Idler Pulley (Pulley only) (Part No.419-603)

Dayco – Straight Heater Hose; EPDM Rubber, 5/16 Inch Diameter (sold by foot) (Part No.80258)