2004 GMC Sierra 2500 HD Differentials

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

• Fits GM and Chrysler 11.5″
• Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished in black powder-coating with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed of Durable A356 Die Cast Aluminum
• Reinforcing Ribs and Black Powder coating w/Machined Fins
• Magnetic Drain and Fill Plugs Capture Loose Particles
• Large Oil Level Sight Glass w/ Calibration Plug

Yukon yoke for GM 10.5″ 14 bolt truck, 1410, strap style. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

• Fits GM 10.5″ 14 bolt truck
• 30 spline
• 1410 u-joint size
• 4.188″ snap ring span
• 1.188″ cap diameter
• Outside snap ring design
• Strap style

11.5″ Chrysler Helical gear Type positraction.

Product Features:

• Fits GM and Chrysler 11.5″
• 30 spline

Yukon spider gear set for GM 9.5″ Gura Drip posi. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:

• Spider gear kit
• Fits GM 9.5″ with Dura Grip positraction
• Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

More like a complete kit than a single part, Dorman’s Four-Wheel Drive (4WD) Actuator comes with all the parts needed to complete the repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:

• Includes all necessary gaskets and seals (where applicable)
• Sealed for leak resistance
• Engineered for durability against harsh road and weather conditions, including water intrusion
• Quality tested to ensure trouble free installation and performance

Product Features:

• Cross pin shaft
• Fits GM 9.5″
• Dura Grip positraction

NO RETURN HM807046 SET-UP Bearing (1 SINGLE Bearing) for Dana 80 , 11.5AAM , 4.125″ OD .

Product Features:

• Set up bearing
• Fits HM807046 pinion bearing
• Easily slips on and off pinion journal to allow for pinion depth adjustment

Differential Drain P

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

• Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
• Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
• Durable construction – designed to rigorous standards and tested to ensure performance
• Trustworthy solution – backed by team of engineers and quality control specialists in the United States

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

• KIT BRG & SEAL GM MSTR 9.5 TIMKEN 98 & LATER

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

• Fits GM 9.25″ IFS
• Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

DiffrlPinSupportBolt

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Differential Carrier

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

9.25IFS GM 11 & up side bearing adjuster.

Product Features:

• Side adjuster
• Fits 2011 and up GM 9.25″ IFS

Product Features:

• Fits Chrysler and GM 11.5″ with 30 spline axles
• Provides 100% traction to both wheels at all times
• Not recommended for street driven vehicles

Pinion seal for ’96-’03 9.5″ GM.Yukon Mighty seal.

Product Features:

• Pinion seal
• Fits 1997 and up GM 9.5″

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

• Spider gear kit
• Fits GM 10.5″ 14 bolt truck open differential
• Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

Eaton positraction shim kit for GM 14T.

Product Features:

• Shim kit
• Fits GM 10.5″ 14 bolt truck Eaton positraction

Product Features:

• CRUSH SLEEVE 9.5 GM 14BLT MIN ORDER 1000

Product Features:

• GM 14BL 9.5 R/P 3.73 MG

Differential Cover B