2004 GMC Envoy XUV Engine Parts

Name: Multi-Use Connector
Brand: Carquest Premium
SKU: PTA1129
Price: 58.99 USD

Below you will find various in-demand GMC Engine Parts, components and accessories for your 2004 Envoy XUV. Advance Auto Parts has popular Envoy XUV parts like Engine Mounts, Camshafts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Envoy XUV model years including 2005 and more. Select a category of 2004 GMC Envoy XUV Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 GMC Envoy XUV Engine Parts Categories

Engine Lifter Valley Cover Gasket Sets

Valve Covers

Engine Oil Pump O-Rings

Engine Valve Lifters

Engine Variable Timing Solenoids

Engine Oil Temperature Senders

Valve Cover Gaskets

Engine Timing Chain Kits

Engine Valve Lifter Guides

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Engine Oil Cooler Accessories

Engine Oil Dip Stick Tubes

Cylinder Head Gaskets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Engine Computers

O-Rings

Main Bearing Repair Sleeves

Timing Cover Seals

Rocker Arms

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Water Connection Gaskets

Oil Pump Kits

Standard Piston Rings

Standard Individual Rod Bearings

Engine Valves

Rocker Arm Nuts

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Camshaft Thrust Plate and Bearings

Engine Rocker Arm Pivots

Remanufactured Engines

Cylinder Heads

Valley Pan Covers

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Camshaft Bushings

Engine Oil Strainer Gasket Sets

Turbocharger Boost Sensor Connectors

Engine Valve Cover O-Rings

Turbocharger Wastegate Connectors

Engine Oil Pump Pickup Tube Bracket

Valve Train Set Up Spring Set

Essential Engine Parts for 2004 GMC Envoy XUVs

from

$58.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength
Provides conformability required for older apps
Our standard material is comparable to competitors performance bearing
Note – This material offers less resistance to wear & corrosion than other materials.
Utilizes ISO & QS certified manufacturing

from

$127.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$14.99

GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$7.29

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$36.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$23.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$81.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$500.99

VALVE SPRING KIT, FOR LS 1.310″ BEEHIVE 1 KT

from

$103.99

ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.99

Made In USA. Installing an oil pump screen can often cause damage to the protective gaskets and O Rings if the screen assembly is not properly installed. In the event that the original seals are damaged or accidently discarded Melling offers a replacement gasket set for oil pump screen installations covering the LS oil pumps. Each package conveniently contains both replacement O Rings needed to complete the oil pump screen installation. These gasket sets can be used for the M295, M295HV, M355, M365, 10295, 10296 and 10355 oil pumps.

from

$134.99

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$42.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair

from

$57.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$387.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$6.49

from

$23.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$7.99

This engine harmonic balancer bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine harmonic balancer bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

This engine crankshaft main bearing cap bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine crankshaft main bearing cap bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$22.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$65.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$24.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Upgrade your 2004 GMC Envoy XUV with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2004 GMC Envoy XUV, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your Envoy XUV functioning at its best. At Advance Auto Parts, we offer a wide selection of 298 Engine Parts for the 2004 GMC Envoy XUV, designed to meet your needs without breaking the bank. From Engine Mount replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2004 GMC Envoy XUV at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $3,479.99, with an average price of $209.69. Our 298 Engine Parts in stock come from 30 trusted brands, so you’re sure to find the right part for your 2004 GMC Envoy XUV without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 GMC Envoy XUV, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Sealed Power, Dorman, and more. Felpro Engine Parts start at just $6.49 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $5.99, and at an average 4.3 stars rating. With 1,756 customer reviews and counting, our 2004 GMC Envoy XUV Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 GMC Envoy XUV is always ready to roll. We’re committed to providing you with everything you need to keep your Envoy XUV in top shape, all in one place. Start shopping confidently below for your 2004 GMC Envoy XUV!

Best-Selling Engine Mounts for 2004 GMC Envoy XUVs

Enhance the driving experience in your GMC with 3 quality Engine Mount components, starting at $69.99.

show more show less

from

$69.99

Anchor 3021 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2009
Weight approx: 4 Lbs
Hydraulic
Part Group: 3021, 3021, 3027

from

$194.99

GM Genuine Parts Engine Mount are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$137.99

Anchor 3251 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2003-2009
Weight approx: 3 Lbs
Hydraulic

Most Popular 2004 GMC Envoy XUV Camshafts

Customize your GMC with 32 Camshafts products like Camshaft Position Sensors, Camshaft Followers, and Camshaft Seals, all priced under $817.99.

show more show less

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$51.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
O-rings and seals are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$49.99

Carquest camshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each camshaft position sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest camshaft position sensors are a cost-effective solution for your engine management repair. Carquest camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$58.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$41.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$20.99

Replacement Captured Needle Thrust Bearing for LS Applications; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Captured Needle Thrust Bearing for LS Applications
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$72.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L

from

$817.99

HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L

LSR Cathedral Port 223/231 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Cathedral Port 223/231 Hydraulic Roller Cam for GM LS GEN III/IV

Mutha' Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Mutha’ Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Centrifugal BLower 227/243 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Centrifugal BLower 227/243 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Rectangular Port 231/247 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Rectangular Port 231/247 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Cathedral Port 227/235 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Cathedral Port 227/235 Hydraulic Roller Cam for GM LS GEN III/IV

Big Mutha' Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Big Mutha’ Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Rectangular Port 219/235 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Rectangular Port 219/235 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Cathedral Port 219/227 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

LSR Cathedral Port 219/227 Hydraulic Roller Cam for GM LS GEN III/IV

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

LSR Cathedral Port 231/239 Hydraulic Roller Cam for GM LS GEN III/IV

from

$515.99

LSR Cathedral Port 231/239 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Rectangular Port 235/251 Hydraulic Roller Cam for GM LS GEN III/IV

from

$515.99

LSR Rectangular Port 235/251 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Cathedral Port 235/243 Hydraulic Roller Cam for GM LS GEN III/IV

from

$515.99

LSR Cathedral Port 235/243 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Centrifugal BLower 235/251 Hydraulic Roller Cam for GM LS GEN III/IV

from

$515.99

LSR Centrifugal BLower 235/251 Hydraulic Roller Cam for GM LS GEN III/IV

LSR Rectangular Port 251/267 Hydraulic Roller Cam for GM LS GEN III/IV

from

$515.99

LSR Rectangular Port 251/267 Hydraulic Roller Cam for GM LS GEN III/IV

Top Picks for 2004 GMC Envoy XUV Valve Cover and Cylinder Heads

Upgrade GMC Envoy XUVs with top-quality Valve Cover and Cylinder Heads parts, including 71 OEM and aftermarket selections for your 2004 model.

show more show less

from

$73.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$212.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$182.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$47.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$194.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$14.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$6.49

from

$35.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$93.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$528.99

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats

Product Features:

Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
Kits designed for hydraulic roller cams
.625″ maximum lift springs

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$14.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$22.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$0.65

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$76.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

Product Features:

.842″ diameter; 122g weight; 2.66″ seat height
Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
Decrease friction and increase longevity when directly compared to flat tappet lifters
Accept much more aggressive cam profiles than flat tappet lifters will allow

from

$500.99

VALVE SPRING KIT, FOR LS 1.310″ BEEHIVE 1 KT

Sportsman Solid Roller Lifter Set with Bushing for GM GEN III/IV LS

from

$1207.00

Sportsman Lifters from COMP Cams are designed to be a premium and lighter weight upgrade over Endure-X Lifters and a value alternative to the Elite Race option. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing axle/wheel design or an optional bronze bushing axle/wheel setup. And for Chevrolets, there are also left or right offset pushrod seat options. Each design features two pressurized EDM oil feeds to the axle, along with an edge orifice feed to the wheel. This design delivers a more reliable oil feed than most other options on the market. Sportsman Lifters also feature a shallower oil band than competitors’ versions for increased strength and rigidity, while internal machining helps to reduce weight. The body design utilizes a skirted wheel that strengthens the lifter ears and also provides more contact area with the lifter bore for further lifter stability. In addition, staked axles eliminate clips and provide robust axle retention. This permanent axle retention feature increases the stiffness of the lifter ears and helps prevent the ears from spreading. Sportsman Lifters are built from 8620 premium steel for increased strength and wear resistance and feature a captured link bar design. They utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. The lifters also feature a tall body to enable use in both standard and .300″ tall lifter bores – the result is increased strength and less lifter bore wear.

GM LS Dual Valve Spring Kit with Tool Steel Retainers

from

$1020.00

GM LS Dual Valve Spring Kit with Tool Steel Retainers

from

$956.99

Product Features:

Cast aluminum 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies
Retain the performance of factory coil-on-cover ignition without the unsightly styling
Base fits LS1, LS2, LS3, LS6 and LS7 engines
Base features internally baffled ventilation system
Clearance for .750″ lift cam with stock style rocker arms
Coil cover features Holley vintage style fins and cast-in wiring provisions
No coil relocation, wire harness extensions, or custom spark plug wires required
Includes low-profile billet oil fill cap
Includes all necessary coil mounting and dress-up hardware

from

$871.99

ENG ROCKER ARM KIT

from

$868.99

Product Features:

Cast aluminum 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies
Retain the performance of factory coil-on-cover ignition without the unsightly styling
Coil cover features vintage valve cover styling with a prominent GM Licensed “Chevrolet” script logo and cast-in wiring provisions
Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750″ lift cam with stock style rocker arms
Base features internally baffled ventilation system
No coil relocation, wire harness extensions, or custom spark plug wires required
Includes low-profile billet oil fill cap
Includes all necessary coil mounting and dress-up hardware

from

$849.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

In-Demand Engine Timing Parts for 2004 GMC Envoy XUVs

Select from 48 premium Engine Timing Parts parts for your 2004 GMC Envoy XUV, with prices ranging from $23.99 to $389.99.

show more show less

from

$70.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
Durable construction – this part is made from quality materials to ensure a long service life
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$71.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$115.99

ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S878T Engine Timing Camshaft Sprocket (1 EA), S827 Engine Timing Crankshaft Sprocket (1 EA), 9-4205 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$44.49

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$175.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, with 9-Keyway Crankshaft Sprocket, 3 Bolt, 1 Sensor Hub

from

$74.99

ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Synchronizes the rotation of the crankshaft and the camshaft(s) to help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$302.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components.

Product Features:

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$45.99

High Performance 3/8″ Pitch Single Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$23.99

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$234.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance, 3 Bolt, 1 Sensor Hub, Single Roller

from

$91.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
168 Links 8MM Roller. Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$58.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$29.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Refer to our online catalog for detailed application-specific information

from

$59.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$28.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$389.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$382.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$372.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$369.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 9-Keyway Crank, 3 Bolt/1 Sensor, .390″ Raised Cam

from

$359.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 9-Keyway Crank Sprocket, 3 Bolt, 1 Sensor Hub

from

$349.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$344.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$339.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 3-Keyway Crank, 3 Bolt/1 Sensor, .390″ Raised Cam

Most Sold 2004 GMC Envoy XUV Engine Gaskets and Seals

Explore our best-selling GMC parts for the 2004 Envoy XUV among 23 OEM and aftermarket options starting from $3.99.

show more show less

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$54.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$83.99

This direct replacement rear main seal cover kit matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this rear main seal cover kit matches the factory design, and includes a new gasket, installation hardware, and an updated seal design for superior leak prevention
Durable construction – the timing cover in this kit is made of die-cast aluminum for a leak-free fit and durability
Convenient solution – this kit includes a new gasket and installation hardware for a complete repair
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$32.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$11.49

This engine coolant water bypass gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine coolant water bypass gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; multi-lip
Temperature range: -100 Deg. F to 450 Deg. F / -73 Deg. C to 232 Deg.
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$20.99

Meets or exceeds all original equipment specifications
Application specific design for Unsurpassed quality you can trust
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$38.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$23.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$42.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair

from

$37.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$65.99

GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$217.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$387.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$89.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Edge molded metal plate construction
Compression limiters to prevent overtightening
Dana engineering-approved for fit, form and function

from

$74.99

Includes: Timing Cover Gasket, Water Pump Gaskets, Timing Cover Seal, O-Rings for Oil Pump & Oil Pickup

Product Features:

OEM Style Gaskets – Molded Rubber over Aluminum Carriers
Replaces GM #’s 12633904, 12630223, 12585673

from

$44.99

GASKET

from

$35.99

Includes two Valve Cover Gaskets / Seals. Molded Rubber O-ring Style.

Product Features:

OEM Style Molded O-Ring Style Gaskets
Replaces GM # 12560696

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Application specific molded rubber construction
Engineered cross section
Dana engineering-approved for fit, form and function

from

$9.99

Product Features:

Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
Insignificant shrinkage and loss of mass even in high-heat environments
Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
Sealing gap 0.006 in (0.15 mm)

from

$3.99

Top-Rated Engine Parts Brands For Your 2004 GMC Envoy XUV

Shop for the best-rated brands offering Engine Parts and other products for your 2004 GMC Envoy XUVs. Below you’ll find some of our best rated Engine Parts from Felpro, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 2004 Envoy XUV start at just $5.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2004 GMC Envoy XUV Engine Parts

When it comes to maintaining or upgrading your 2004 GMC Envoy XUV, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2004 GMC Envoy XUV. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.49, with an average price of just $43.16. Plus, with over 157 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.49

(41)

Multi-Purpose O-Ring

“Perfect fir”

from $67.99

(74)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“This is a great gasket well worth the extra money.”

from $54.99

(42)

TIMING COVER GASKET SET

“Excellent Gasket set fit everything perfect.”

Popular Sealed Power 2004 GMC Envoy XUV Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2004 GMC Envoy XUV owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2004 Envoy XUV, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Sealed Power Engine Parts range from $5.99 to $8.49, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $8.49

(1)

Engine Connecting Rod Bearing

“great”

from $5.99

(2)

Engine Connecting Rod Bearing

“I needed these parts right away & Advance Auto had them in stock. They were exactly what I needed, they worked great.”

from $7.29

(1)

Engine Connecting Rod Bearing

“great price and fit good”

FAQs for 2004 GMC Envoy XUV Engine Parts

Which Engine Parts are best-sellers for 2004 GMC Envoy XUVs?

Out of 298 Engine Parts that fit 2004 GMC Envoy XUVs, the following parts are the top sellers:

Engine Valve Lifter (5681081) – $14.49
TIMING COVER GASKET SET (15780436) – $54.99
Engine Crankshaft Seal Kit (15780459) – $42.99

What’s the price range for 2004 GMC Envoy XUV Engine Parts?

Engine Part prices for the 2004 GMC Envoy XUV start at $0.65 and go up to $3,479.99 for the most premium parts.

What’s the average price of a Engine Part for a 2004 GMC Envoy XUV?

The average price for Engine Parts for the 2004 GMC Envoy XUV is $209.69. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Engine Parts for my 2004 GMC Envoy XUV?

The cheapest 2004 GMC Envoy XUV Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (15680110) – $0.65
Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Fuel Injector O-ring Set (15780910) – $3.99
Engine Oil Strainer Gasket Set (12222159) – $3.99
Engine Connecting Rod Bearing (20683077) – $4.79

What are the top-rated Engine Parts that fit the 2004 GMC Envoy XUV?

Out of 1,756 reviews by customers, our 2004 GMC Envoy XUV Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2004 GMC Envoy XUV and their top-rated products:

Valve Cover and Cylinder Heads
- PermaTorque Engine Cylinder Head Gasket Set (20780074) – $212.99
- PermaTorque Engine Cylinder Head Gasket (15780826) – $73.99
- PermaTorque Engine Cylinder Head Gasket Set (21021999) – $182.99
Engine Gaskets and Seals
- PermaTorque Engine Cylinder Head Gasket Set (20780074) – $212.99
- PermaTorque Engine Cylinder Head Gasket (15780826) – $73.99
- PermaTorque Engine Cylinder Head Gasket Set (21021999) – $182.99

What types of Engine Parts do you sell for my 2004 GMC Envoy XUV?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2004 GMC Envoy XUV:

Can I get help with 2004 GMC Envoy XUV Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.

What is your return policy for GMC Envoy XUV Engine Parts?

Advance Auto Parts keeps returns simple. For new GMC Envoy XUV Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 GMC Envoy XUV Engine Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1129)

Sealed Power – Engine Connecting Rod Bearing (Part No.2555CP 30)

GM Genuine Parts – 14-Way Female Gray Multi-Purpose Pigtail (Part No.PT1008)

GM Genuine Parts – Gen III/IV Lifter Guide (Part No.12595365)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

MAHLE Original – Engine Oil Cooler Gasket Set (Part No.B31867)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Felpro – Fuel Injector O-ring Set (Part No.ES 71192)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S878T)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40678)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-2555A 1)

Competition Cams – Valve Spring Kit, For Ls 1.310" Beehive 1 Kt (Part No.26915CS-KIT)

GM Genuine Parts – Engine Crankshaft Position Sensor (Part No.213-354)

Melling – Engine Oil Strainer Gasket Set (Part No.M29517)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K322)

Felpro – Engine Lifter Valley Cover Gasket Set (Part No.MS 92465)

Melling – Stock Replacement Oil Pump Screen (Part No.358S)

Felpro – Engine Gasket Set (Part No.260-1974)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30693 R)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Sealed Power – Engine Push Rod (Part No.RP-3349)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5504)

Dorman – Harmonic Balancer Bolt (Part No.917-139)

Dorman – Help – Engine Bearing Bolt Set (Part No.45691)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72233)

Schaeffler – Shaft Seal (Part No.SS3405)

Victor Reinz – Engine Camshaft Seal (Part No.71-18369-00)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3021)

GM Genuine Parts – Engine Mount (Part No.15062381)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3251)

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam (Part No.54-408-11)

Carquest Premium – Camshaft Position Sensor (Part No.CSC1042)

Carquest – Camshaft Position Sensor (Part No.35C1009)

NTK – Engine Camshaft Position Sensor (Part No.EC0230)

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

Felpro – Engine Camshaft Thrust Plate (Part No.ES 73115)

Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-232)

GM Genuine Parts – 3-Way Female Black Multi-Purpose Pigtail (Part No.PT1496)

Competition Cams – XFI RPM HI-LIFT 228/230 Hydraulic Roller Cam (Part No.54-428-11)

Competition Cams – HV NSR Cam 218/226 .541/.541 Hyd Roller for GEN III/IV 4.8L/5.3L/6.0L (Part No.54-271-11)

Competition Cams – LSR Cathedral Port 223/231 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-457-11)

Competition Cams – Mutha’ Thumpr 227/241 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-601-11)

Competition Cams – LSR Centrifugal BLower 227/243 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-477-11)

Competition Cams – LSR Rectangular Port 231/247 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-469-11)

Competition Cams – LSR Cathedral Port 227/235 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-458-11)

Competition Cams – Big Mutha’ Thumpr 235/249 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-602-11)

Competition Cams – LSR Rectangular Port 219/235 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-453-11)

Competition Cams – LSR Cathedral Port 219/227 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-456-11)

Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)

Competition Cams – LSR Cathedral Port 231/239 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-459-11)

Competition Cams – LSR Rectangular Port 235/251 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-470-11)

Competition Cams – LSR Cathedral Port 235/243 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-460-11)

Competition Cams – LSR Centrifugal BLower 235/251 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-478-11)

Competition Cams – LSR Rectangular Port 251/267 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-474-11)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26191 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26191 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26214 PT)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72220)

Dorman – Valve Covers: with Gasket, Direct Replacement, Aluminum (Part No.264-965)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Sealed Power – Engine Push Rod (Part No.RP-3349)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72173)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71334)

Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

GM Genuine Parts – Gen III/IV Lifter Guide (Part No.12595365)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72233)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26214 PT)

Competition Cams – LIFTERS, LS SERIES OE STYLE HYD RLR 1 ST (Part No.850-16)

Competition Cams – Valve Spring Kit, For Ls 1.310" Beehive 1 Kt (Part No.26915CS-KIT)

Competition Cams – Sportsman Solid Roller Lifter Set with Bushing for GM GEN III/IV LS (Part No.96956B-16)

Competition Cams – GM LS Dual Valve Spring Kit with Tool Steel Retainers (Part No.26926TS-KIT)

Holley – 2-Piece Finned Valve Cover – Gen III/IV LS – Polished (Part No.241-181)

Competition Cams – ENG ROCKER ARM KIT (Part No.16755-KIT)

Holley – 2-Piece "Chevrolet" Script Valve Cover – Gen III/IV LS – Polished (Part No.241-176)

Spartan – Engine Cylinder Head; Chevrolet 4.2 02-05 Cyl Head (Part No.2CTW)

Dorman – Variable Valve Timing Solenoid (Part No.917-010)