2004 Dodge Ram 2500 Performance and Racing Products

Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 2004 Ram 2500. Advance Auto Parts has popular Ram 2500 parts like Performance Ignition Products, Performance Air Intake Kits, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Ram 2500 model years including 1998, 2000, 2003, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 2004 Dodge Ram 2500 Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 Dodge Ram 2500 Performance and Racing Products Categories

Performance Oil Filters

Computer Chip Programmers

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Computer Prom and Chips

Engine Cold Air Intakes

Performance Radiator Caps

Performance Ignition Modules

Performance Differential Pinion Yokes

Performance Exhaust Manifold Gaskets

Performance Engine Camshafts

Performance Ring and Pinions

Performance Exhaust Pipes

Performance Ball Joint Boots

Performance Brake Hose Kits

Performance Nitrous Systems

Essential Performance and Racing Products for 2004 Dodge Ram 2500s

from

$469.99

The GT Gas and Diesel tuners unlock more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you’ll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls.

Product Features:

Track critical performance data in real-time on easy to navigate virtual gauges
Select between multiple street-tested, dyno-proven tunes for economy, towing or performance.
Reads and clears DTC (Diagnostic Trouble Codes) with ease
Manage tire size, gear ratio, speed limiter, speedometer calibrations, shift points, and more. Offering shift-on-the-fly tuning and better control of defueling and regeneration.
Product might not be available in all states due to local laws.

from

$451.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$20.99

Header Gasket Set

from

$192.99

The MagnaFlow 7 X 7in. Round Straight-Through Performance Exhaust Muffler 12771 is engineered to enhance your ride with a healthy helping of our signature exhaust sound and dyno-proven performance thanks to its free-flowing straight-through perforated stainless steel core wrapped in stainless steel mesh and acoustic fiber fill. The reversible, universal 4/4in. diameter inlet/outlet Straight-Through layout allows you to install it in whatever orientation and configuration you see fit. However, professional installation is highly recommended. Muffler 12771s weight-optimized 7x7x20in. oval-shaped body features a satin finish that elevates the overall aesthetics of your current exhaust setup. 12771 is made of durable, corrosion resistant stainless steel and produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited construction warranty.

Product Features:

Delivers a Smooth, Deep Tone
Mufflers are Bi-Directional
100% Stainless Steel

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$17.99

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$208.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction blue Spectre High Performance Racing (HPR) air filter, polished aluminum intake tubing and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack adapter, couplers, clamps, and all necessary hardware for an OE fit and finish. The stock Intake Air Temperature sensor mounts on the intake tube using the supplied grommet.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$435.99

The Momentum HD is designed around a massive Pro DRY S performance 360 degree radial flow air filter with 3-layers of progressive synthetic media providing 99.2% cumulative efficiency. The unique filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse.

Product Features:

Out Produces Factory Intake By 31%
High Quality 1-Piece Sealed Housing w/Auxiliary Air Inlet
CAD-Designed Roto-Molded Intake Tube
Age POWER Pro DRY S Filter Included For Maximum Performance

from

$239.99

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

Speedometer correction for multiple tire sizes
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable
Product might not be available in all states due to local laws.

from

$469.99

The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:

HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
Reads and Erases Diagnostic Trouble Codes
Display Over 15 Vehicle Parameters
Installation Is Easy-10-20 Minutes
Free Internet Updates And Upgrades
30 Day Money Back Guarantee

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$369.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$438.99

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$472.99

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 50,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
HIGH QUALITY: Made in America.

from

$208.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)
Product might not be available in all states due to local laws.

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$1076.99

If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Product Features:

Provides Additional Air Your Diesel Wants
Additional 50 HP
w/No Fuel System Or Electronic Upgrades
Complete Kit For Easy Installation

from

$169.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available – ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

from

$36.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$120.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$112.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$257.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$284.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$269.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$254.99

Product Features:

BILLET HP 1350-29 SPLINE YOKE

Upgrade your 2004 Dodge Ram 2500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2004 Dodge Ram 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Ram 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Performance and Racing Products for the 2004 Dodge Ram 2500, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Air Intake Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2004 Dodge Ram 2500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $0.95 to $1,076.99, with an average price of $305.76. Our 31 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 2004 Dodge Ram 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Dodge Ram 2500, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N Spectre, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. With 578 customer reviews and counting, our 2004 Dodge Ram 2500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Dodge Ram 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Ram 2500 in top shape, all in one place. Start shopping confidently below for your 2004 Dodge Ram 2500!

Best-Selling Performance Ignition Products for 2004 Dodge Ram 2500s

Enhance the driving experience in your Dodge with 1 quality Performance Ignition Product components, starting at $451.99.

show more show less

from

$451.99

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

Most Popular 2004 Dodge Ram 2500 Performance Air Intake Kits

Customize your Dodge with 10 Performance Air Intake Kits products like Engine Cold Air Intakes and Performance Air Intake Kits, all priced under $472.99.

show more show less

from

$209.99

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$209.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a blue Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$419.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$472.99

Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 50,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
HIGH QUALITY: Made in America.

from

$419.99

Guaranteed to increase horsepower and torque
Powder-coated aluminum intake tube paired with dry synthetic air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 50,000 miles under normal highway driving conditions
Typical installation can be completed in 90 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
HIGH QUALITY: Made in America.

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$208.99

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)
Product might not be available in all states due to local laws.

Performance Air Intake - Delta Force - 03-08 Ram 5.7L

from

$459.99

Performance Air Intake – Delta Force – 03-08 Ram 5.7L

from

$435.99

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

Uses Pro 5R Filter For Maximum Air Flow
Rotomolded Plastic Tube For Maximum Air Flow
59% cfm Flow Gain
Improved Throttle Response

from

$419.99

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

1000 cfm Performance 360 deg. Radial Flow Air Filter
10 Layer Progressive Cotton Gauze Oiled Media
Unique Air Filter To Housing Interface
Allows For Maximum Filter Size

Top Picks for 2004 Dodge Ram 2500 Performance Oil Filters

Upgrade Dodge Ram 2500s with top-quality Performance Oil Filters parts, including 2 OEM and aftermarket selections for your 2004 model.

show more show less

from

$17.99

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$17.99

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

In-Demand Performance Engines for 2004 Dodge Ram 2500s

Select from 2 premium Performance Engines parts for your 2004 Dodge Ram 2500, with prices ranging from $643.99 to $643.99.

show more show less

from

$643.99

TPX 246HR-16

from

$643.99

TPX 262HR-14

Most Sold 2004 Dodge Ram 2500 Performance Exhaust Products

Explore our best-selling Dodge parts for the 2004 Ram 2500 among 5 OEM and aftermarket options starting from $36.99.

show more show less

from

$195.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$36.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from aluminized steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$51.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$120.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$112.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

Top-Rated Performance and Racing Products Brands For Your 2004 Dodge Ram 2500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2004 Dodge Ram 2500s. Below you’ll find some of our best rated Performance and Racing Products from K&N and Spectre, and more. Performance and Racing Products from these brands that fit a 2004 Ram 2500 start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2004 Dodge Ram 2500 Performance and Racing Products

When it comes to maintaining or upgrading your 2004 Dodge Ram 2500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2004 Dodge Ram 2500. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $303.66. Plus, with over 132 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(120)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

“All good, right filter for 1973 volvo.”

from $419.99

(11)

Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter

“I own a 2004 Dodge Rumble Bee, 5.7 Hemi, recently installed K&N 77-1533KP SYSTEM ON THE THE ENGINE, I have to to say, it really, woke that Hemi up, tr”

from $472.99

(1)

Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter

“Noticeable improvement in performance and fuel mileage. Quality materials and easy to install.”

Popular Spectre 2004 Dodge Ram 2500 Performance and Racing Products

Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2004 Dodge Ram 2500 owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2004 Ram 2500, Advance Auto Parts carries a full inventory of 2 Spectre Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Spectre Performance and Racing Products range up to $209.99, plus, with more than 9 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $209.99

(8)

Spectre Air Intake Kit

“Great!!!!”

from $209.99

(1)

Spectre Air Intake Kit

“Bought this unit for my stock 2005 Ram 5.7 hemi. Easy install except for the sensor and grommet. Very happy. Added a little power and the sound is rea”

FAQs for 2004 Dodge Ram 2500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2004 Dodge Ram 2500s?

Out of 31 Performance and Racing Products that fit 2004 Dodge Ram 2500s, the following parts are the top sellers:

Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (11051146) – $469.99
Diesel Performance Tuner with Gauges & Customizable Tuning (99991314) – $469.99
Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 25" L, 4" In, 4" Out, Oval (20290047) – $195.99

What’s the price range for 2004 Dodge Ram 2500 Performance and Racing Products?

Performance and Racing Product prices for the 2004 Dodge Ram 2500 start at $0.95 and go up to $1,076.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2004 Dodge Ram 2500?

The average price for Performance and Racing Products for the 2004 Dodge Ram 2500 is $305.76. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Dodge Ram 2500 model years?

Yes, we currently carry Performance and Racing Products for 12 model years of Dodge Ram 2500s between 1994 and 2010. Performance and Racing Products are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2003, 2000, and 1998.

What are the cheapest Performance and Racing Products for my 2004 Dodge Ram 2500?

The cheapest 2004 Dodge Ram 2500 Performance and Racing Products we carry in stock are:

Trinity 2 (50008791) – $0.95
Ball Joint Dust Boot Set (22906819) – $6.29
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120012) – $17.99
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120026) – $17.99
Universal Catalytic Converter: Fabrication Needed, 2.5 " In, 2.5 "Ou, EPA Cpl (20200560) – $36.99

What are the top-rated Performance and Racing Products that fit the 2004 Dodge Ram 2500?

Out of 578 reviews by customers, our 2004 Dodge Ram 2500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2004 Dodge Ram 2500 and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120026) – $17.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120012) – $17.99
Performance Air Intake Kits
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120026) – $17.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120012) – $17.99

What types of Performance and Racing Products do you sell for my 2004 Dodge Ram 2500?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2004 Dodge Ram 2500:

Can I get help with 2004 Dodge Ram 2500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

What is your return policy for Dodge Ram 2500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Dodge Ram 2500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Dodge Ram 2500 Performance and Racing Products

Bully Dog – Diesel Performance Tuner with Gauges & Customizable Tuning (Part No.40420)

aFe POWER – Power Module (Part No.77-42007)

Flowtech – Header Gasket Set (Part No.99361FLT)

MagnaFlow – 7 X 7in. Round Straight-Through Performance Exhaust Muffler (Part No.12771)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-4003)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9934B)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 31% More Airflow With Dry Air Filter For Easy Maintenance (Part No.51-72001)

Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Richmond Gear – Differential Ring And Pinion (Part No.69-0054-1)

Richmond Gear – Differential Ring And Pinion (Part No.69-0220-1)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.71-1532)

Spectre – Spectre Air Intake Kit (Part No.9938)

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13130G)

NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)

Russell – Hydraulic Hose Kit (Part No.694510)

Dynomax – Universal Catalytic Converter: Fabrication Needed, 2.5 " In, 2.5 "Ou, EPA Cpl (Part No.51036)

Dynomax – Exhaust Intermediate Pipe (Part No.54734)

Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51072)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.20-212-2)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.20-221-3)

Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.20-220-3)

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)

aFe POWER – Power Module (Part No.77-42006)

Spectre – Spectre Air Intake Kit (Part No.9932)

Spectre – Spectre Air Intake Kit (Part No.9932B)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.77-1533KP)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.71-1532)

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.71-1533)

K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.57-1532)

Spectre – Spectre Air Intake Kit (Part No.9938)

Flowmaster Inc. – Performance Air Intake – Delta Force – 03-08 Ram 5.7L (Part No.615110)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 14 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11342-1)

aFe POWER – Momentum HD Cold Air Intake: Gain up to 22 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-72002)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-4003)

Competition Cams – TPX 246HR-16 (Part No.112-525-11)

Competition Cams – TPX 262HR-14 (Part No.112-535-11)

Dynomax – Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 25" L, 4" In, 4" Out, Oval (Part No.17557)

Dynomax – Universal Catalytic Converter: Fabrication Needed, 2.5 " In, 2.5 "Ou, EPA Cpl (Part No.51036)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)

Dynomax – Exhaust Intermediate Pipe (Part No.54734)

Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51072)