2004 Dodge Caravan Brake Rotors and Drums

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. With a direct OE fit, there are no special modifications needed.

Product Features:

• Chamfered drill holes and rounded slots to minimize stress cracking
• Bolt-on upgrade for stock brakes, no modifications necessary
• Precision cross-drilled for maximum cooling and optimum performance
• Slotted friction surface sweeps away gasses, dust, and water
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• 100% dynamic mill balanced
• 100% dynamic mill balanced
• Sold as a pair

The Brembo brake disc with special UV paint treatment guarantees superior corrosion resistance for the product, thanks to the protective coating on the outer edges and on the disc hub. The UV paint not only gives the disc a clean, shiny appearance but is also beneficial for the environment as the water-based UV paint treatment does not require the use of chemical solvents and is a low energy consumption process.

Product Features:

• UV Coating for the entire disc. An environmentally friendly protective coating with a high resistance to corrosion & can be installed right out of the box
• Supplied with necessary fixing hardware
• Total control over the entire process

Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle’s braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.

Product Features:

• Coated using genuine GEOMET 360 for optimum anti-corrosion protection
• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• 100% dynamic mill balanced

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes – no matter where or how they use their vehicle. PowerStop Coated Hat and Edge Rotors are a partially coated, direct bolt-on replacement for original equipment. These rotors have a silver epoxy coating applied to areas that are prone to corrosion, including the hat, outer edge, and vanes. This corrosion resistant coating will help maintain a great look behind modern alloy wheels. PowerStop rotors are designed to match original equipment performance and specifications including weight and vane count for guaranteed fitment.

Product Features:

• Painted Hat and Edge for corrosion resistance on hat, outer edges, and vanes
• Weight and vane count match original equipment design
• Manufactured to strict tolerances for DTV and runout for smooth, quiet performance
• Original equipment fit and function, as well as performance
• Cross-hatched friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Direct bolt-on replacement; no modifications necessary
• Sold individually

Power Stop Autospecialty brake rotors provide a direct fit solution for original equipment fit and performance.

Product Features:

• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• Cross-hatched surface finish on friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Sold individually

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The Hold Down Spring top Cups are designed to provide direct and simple replacement.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Fast and efficient replacement
• Eliminates heat and corrosion deterioration
• Corrosion resistant coating for long-lasting durability against harsh roads

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Increases the Life Span and Improves the Performance of the Drum Brakes
• Coated to eliminate heat and corrosion deterioration
• Restores brakes to like-new performance
• This part matches Original Equipment (OE) quality specifications

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Brakes are designed as a system and all the parts need to work together for best performance. The Dust Hole Cover covers the brake adjustment slot from debris to keep your brakes running smoothly.

Product Features:

• Keeps out dirt and debris
• Direct replacement for a proper fit
• OE Fit and Function
• Maintains proper seal

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Features RotorShield+ coating to maintain a like-new appearance
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise

Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Matches OE vane size for proper cooling
• Optimal metallurgy and casting thickness to prevent warping
• Air gap eliminates brake fade and increases pad life
• Non-directional finish decreases break-in time

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Features RotorShield+ coating to maintain a like-new appearance
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise

Brembo brake rotors embody the brand’s legacy of innovation, precision, and racing pedigree, delivering superior braking performance, durability, and safety for every vehicle and driving style. Designed and manufactured with the same engineering rigor found in Brembo’s original equipment for the world’s leading automakers, these rotors ensure consistent stopping power, smooth operation, and long-lasting reliability. Each rotor is crafted from premium cast iron formulations optimized for strength, heat dissipation, and vibration control. Many applications feature elevated or high-carbon metallurgy that enhances thermal stability and reduces the risk of distortion or cracking under extreme conditions. Brembo’s signature UV coating protects the entire rotor surface, including internal ventilation chambers, against corrosion to ensure lasting performance and a clean, refined appearance even after extended use. Advanced venting designs, including Brembo’s exclusive Pillar Venting Technology (PVT), increase airflow through the rotor for up to 40% greater resistance to thermal cracking compared to conventional vane systems. Precision balancing and tight manufacturing tolerances minimize runout and vibration, promoting smooth and confident braking performance. From solid and vented discs to drilled and slotted designs, each rotor is engineered to match or exceed OE specifications for fit, function, and performance. Brembo rotors undergo strict electronic testing and quality control to ensure perfect balance and reliability right out of the box, delivering the craftsmanship, confidence, and comfort expected from the global leader in braking systems

Product Features:

• Elevated Carbon Content: Optimized metallurgy provides increased strength, heat dissipation, and reduced vibration, engineered to help prevent runout and deliver reliable, fade-resistant braking performance
• Vented Cooling: OE based vane design promotes effective heat dissipation and consistent braking performance, ensuring thermal stability and reliable operation
• OE Replacement: Engineered to meet or exceed OE specifications, delivering precise fit, consistent braking, and Brembo-certified quality with ECE R-90 compliance.
• Rotors are electronically tested to ensure perfect balance right out of the box

Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle’s braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.

Product Features:

• Coated using genuine GEOMET 360 for optimum anti-corrosion protection
• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• 100% dynamic mill balanced

Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle’s braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.

Product Features:

• Coated using genuine GEOMET 360 for optimum anti-corrosion protection
• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• 100% dynamic mill balanced

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes – no matter where or how they use their vehicle. PowerStop Coated Hat and Edge Rotors are a partially coated, direct bolt-on replacement for original equipment. These rotors have a silver epoxy coating applied to areas that are prone to corrosion, including the hat, outer edge, and vanes. This corrosion resistant coating will help maintain a great look behind modern alloy wheels. PowerStop rotors are designed to match original equipment performance and specifications including weight and vane count for guaranteed fitment.

Product Features:

• Painted Hat and Edge for corrosion resistance on hat, outer edges, and vanes
• Weight and vane count match original equipment design
• Manufactured to strict tolerances for DTV and runout for smooth, quiet performance
• Original equipment fit and function, as well as performance
• Cross-hatched friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Direct bolt-on replacement; no modifications necessary
• Sold individually

Power Stop Autospecialty brake rotors provide a direct fit solution for original equipment fit and performance.

Product Features:

• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• Cross-hatched surface finish on friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Sold individually

Power Stop Autospecialty brake rotors provide a direct fit solution for original equipment fit and performance.

Product Features:

• Bolt-on replacement, no modifications necessary
• Direct original equipment fit and function
• Manufactured to strict tolerances for DTV and runout for smooth quiet performance
• Weight and vane count match original equipment design
• Cross-hatched surface finish on friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Sold individually

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes – no matter where or how they use their vehicle. PowerStop Coated Hat and Edge Rotors are a partially coated, direct bolt-on replacement for original equipment. These rotors have a silver epoxy coating applied to areas that are prone to corrosion, including the hat, outer edge, and vanes. This corrosion resistant coating will help maintain a great look behind modern alloy wheels. PowerStop rotors are designed to match original equipment performance and specifications including weight and vane count for guaranteed fitment.

Product Features:

• Painted Hat and Edge for corrosion resistance on hat, outer edges, and vanes
• Weight and vane count match original equipment design
• Manufactured to strict tolerances for DTV and runout for smooth, quiet performance
• Original equipment fit and function, as well as performance
• Cross-hatched friction surface for optimal pad break-in
• 100% dynamic mill balanced
• Direct bolt-on replacement; no modifications necessary
• Sold individually