2004 Chevrolet Tahoe Performance and Racing Products
Find Your Specific 2004 Chevrolet Tahoe Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2004 Tahoe. Advance Auto Parts has popular Tahoe parts like Performance Exhaust Products, Performance Ignition Products, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Tahoe model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2004 Chevrolet Tahoe Performance and Racing Products below and start saving instantly.
Popular 2004 Chevrolet Tahoe Performance and Racing Products Categories
Essential Performance and Racing Products for 2004 Chevrolet Tahoes
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9918B)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
- Product might not be available in all states due to local laws.
SCT Performance – X4 Performance Programmer (Part No.7416)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
Russell – Street Legal, C1500/C2500 P/U 2WD (Part No.672340)
from
$68.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Energy Suspension – SwyBarBshKt (Part No.3.5214R)
from
$57.99
SwyBarBshKt
Flowtech – Shorty Smog Headers (Part No.91836-1FLT)
from
$749.99
Shorty Smog Headers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3002)
from
$18.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Spectre – Spectre Replacement Air Filter (Part No.HPR8755)
from
$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Chevy and GM truck applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Energy Suspension – MotorMt (Part No.3.1152R)
from
$48.99
MotorMt
Energy Suspension – SwyBarBshKt (Part No.3.5215R)
from
$27.99
SwyBarBshKt
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9918)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
- Product might not be available in all states due to local laws.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.77-3070KP)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Richmond Gear – RngPnn (Part No.69-0173-1)
from
$407.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.G885273)
Dynomax – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52190)
from
$112.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Y Pipe (Part No.53097)
from
$268.99
Made from aluminized steel for durability, DynoMax direct fit Y-pipe is manufactured with precision bends and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from quality 16-gauge aluminized steel for durability and long life
- BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with DynoMax pipe
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 24" L, 3" In, 3" Out, Oval (Part No.17235)
from
$146.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Exhaust Tail Pipe (Part No.55114)
from
$124.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$36.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
B & M – TRAVELER CONVERTER (Part No.70431)
from
$899.99
Torque Converter – Traveler Converter with 2000 RPM Stall Speed APPLICATION: GM 4L80E The Traveler converter is intended for use in motorhomes, tow vehicles or other heavy duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. The Traveler is also stronger than a stock converter and has been internally modified to provide about 300 rpm more stall speed for help in initial acceleration without sacrificing normal highway operation. It is manufactured to B&M’s exacting tolerances for long life. Provides slightly higher stall speed than stock to improve pulling power at low speeds. Application: GM 4L80E Please download the attached 4L80E torque converter installation tips. New Precision pump drive tube Heavy duty needle bearings Furnace brazed New sprag and rollers in stator Pressure tested Fully balanced.
Product Features:
See More
Product Features:
- Ideal For Motor Homes
- Ideal For Towing Applications
- Precision Pump Drive Tube
- Heavy Duty Needle Bearings
- Furnace Brazed
- New Sprag and Rollers In Stator
- Pressure Tested
- Fully Balanced
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$449.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$625.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Accel – GM Ext. Coil 90-95 Ign Module (Part No.35370)
from
$172.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM ignition systems with the externally mounted module. 1990 thru 1995.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Dwell Control Circuit
- Resists False Triggering
Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)
from
$123.99
Ditch that plain-Jane stock appearance once and for all. AVS Hood Scoops add 200HP in looks alone. Its heat-resistant, UV-protected, thermoplastic material is built to last a lifetime delivering unmistakable eye appeal wherever you go. Available in smooth black nish with paintable surface so you can match your factory paint if you like. Choose from several styles and sizes in 1- and 2-piece options. Cleanly mounts with 3M automotive-grade adhesive tape concealed. . Proudly made in the USA with global materials.
Product Features:
See More
Product Features:
- Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
- Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
- No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
- Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
- AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
- Made In The USA With Global Materials.
MSD Ignition – Wire Set; Black Super Conductor; LS-1 Truck Engines; 99-on (Part No.32823)
from
$118.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Accel – 8Mm Super Stock Spiral Cust Bk (Part No.5114K)
from
$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 7mm And 8mm High Gloss Silicone Jacket
MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with HEI Cap (Part No.35599)
from
$140.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)
from
$214.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Upgrade your 2004 Chevrolet Tahoe with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2004 Chevrolet Tahoe, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Tahoe functioning at its best. At Advance Auto Parts, we offer a wide selection of 33 Performance and Racing Products for the 2004 Chevrolet Tahoe, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2004 Chevrolet Tahoe at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $17.99 to $749.99, with
an average price of $261.19.
Our 33 Performance and Racing Products in stock come from 15 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Tahoe without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Tahoe, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Spectre, MSD Ignition, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
Spectre and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $42.49, and at an average 4.2 stars rating.
With 1,290 customer reviews and counting, our 2004 Chevrolet Tahoe Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 Chevrolet Tahoe is always ready to roll. We’re committed to providing you with everything you need to keep your Tahoe in top shape, all in one place.
Start shopping confidently below for your 2004 Chevrolet Tahoe!
Best-Selling Performance Exhaust Products for 2004 Chevrolet Tahoes
Enhance the driving experience in your Chevrolet with 4 quality Performance Exhaust Product components, starting at $112.99.
Dynomax – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52190)
from
$112.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953047)
from
$149.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Exhaust Tail Pipe (Part No.55114)
from
$124.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from aluminized steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowtech – Shorty Smog Headers (Part No.91836-1FLT)
from
$749.99
Shorty Smog Headers
Most Popular 2004 Chevrolet Tahoe Performance Ignition Products
Customize your Chevrolet with 2 Performance Ignition Products products
like Performance Spark Plug Wires and
Performance Ignition Modules, all
priced under $123.99.
MSD Ignition – Wire Set; Black Super Conductor; LS-1 Truck Engines; 99-on (Part No.32823)
from
$118.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)
from
$123.99
Ditch that plain-Jane stock appearance once and for all. AVS Hood Scoops add 200HP in looks alone. Its heat-resistant, UV-protected, thermoplastic material is built to last a lifetime delivering unmistakable eye appeal wherever you go. Available in smooth black nish with paintable surface so you can match your factory paint if you like. Choose from several styles and sizes in 1- and 2-piece options. Cleanly mounts with 3M automotive-grade adhesive tape concealed. . Proudly made in the USA with global materials.
Product Features:
See More
Product Features:
- Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
- Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
- No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
- Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
- AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
- Made In The USA With Global Materials.
Top Picks for 2004 Chevrolet Tahoe Performance Oil Filters
Upgrade Chevrolet Tahoes with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 2004 model.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1007)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
In-Demand Performance Air Filters for 2004 Chevrolet Tahoes
Select from 1 premium Performance Air Filters parts for your 2004 Chevrolet Tahoe.
Spectre – Spectre Replacement Air Filter (Part No.HPR8755)
from
$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Chevy and GM truck applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Most Sold 2004 Chevrolet Tahoe Performance Engines
Explore our best-selling Chevrolet parts for the 2004 Tahoe among 4 OEM and aftermarket options starting from $36.99.
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$449.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$36.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
B & M – Holeshot 2400 (Part No.70419)
from
$670.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Torque Converter, Holeshot 2000 (Part No.70417)
from
$625.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Top-Rated Performance and Racing Products Brands For Your 2004 Chevrolet Tahoe
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2004 Chevrolet Tahoes. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 2004 Tahoe start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2004 Chevrolet Tahoe Performance and Racing Products
When it comes to maintaining or upgrading your 2004 Chevrolet Tahoe, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2004 Chevrolet Tahoe. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 50 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$17.99
(50)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“It’s expensive but you can’t beat it plus it has the socket attachment so you can get a nice tight seal in the tight space where the oil filter is loc”
Popular Spectre 2004 Chevrolet Tahoe Performance and Racing Products
Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2004 Chevrolet Tahoe owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2004 Tahoe, Advance Auto Parts carries a full inventory of 3 Spectre Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Spectre Performance and Racing Products range from $42.49 to $199.99, plus, with more than 78 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$42.49
(24)
Spectre Replacement Air Filter
“Great fitment and notice some better fuel economy! I highly recommend it.”
from
$199.99
(53)
Cold Air Intake Kit Engineered to Add Horsepower & Torque
“This kit was an easy install only took about an hour and 1/2. Anyone can do it. The pictures should be better in the instructions to show where the fi”
FAQs for 2004 Chevrolet Tahoe Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2004 Chevrolet Tahoes?
Out of 33 Performance and Racing Products that fit 2004 Chevrolet Tahoes, the following parts are the top sellers:
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120006) – $17.99
- Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (20290686) – $149.99
- SwyBarBshKt (10600114) – $57.99
What’s the price range for 2004 Chevrolet Tahoe Performance and Racing Products?
Performance and Racing Product prices for the 2004 Chevrolet Tahoe start at $17.99 and go up to $749.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2004 Chevrolet Tahoe?
The average price for Performance and Racing Products for the 2004 Chevrolet Tahoe is $261.19. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Tahoe model years?
What are the cheapest Performance and Racing Products for my 2004 Chevrolet Tahoe?
The cheapest 2004 Chevrolet Tahoe Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120006) – $17.99
- SwyBarBshKt (10600169) – $27.99
- SwyBarBshKt (10600173) – $27.99
- Ls1 Late Thermostat (11151861) – $36.99
- Spectre Replacement Air Filter (10162656) – $42.49
What are the top-rated Performance and Racing Products that fit the 2004 Chevrolet Tahoe?
Out of 1,290 reviews by customers, our 2004 Chevrolet Tahoe Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2004 Chevrolet Tahoe and their top-rated products:
- Performance Oil Filters
- Performance Air Filters
What types of Performance and Racing Products do you sell for my 2004 Chevrolet Tahoe?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2004 Chevrolet Tahoe:
Can I get help with 2004 Chevrolet Tahoe Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Tahoe Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Tahoe Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
