2004 Chevrolet Monte Carlo Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2004 Monte Carlo. Advance Auto Parts has popular Monte Carlo parts like Valve Cover and Cylinder Heads, Camshafts, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other Monte Carlo model years including 1998, 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007 and more. Select a category of 2004 Chevrolet Monte Carlo Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 Chevrolet Monte Carlo Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Engine Mount and Torque Struts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Plenum Gasket Sets

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Oil Pans

Engine Oil Dip Stick Tubes

Valve Cover Plugs

Body Control Computers

Cylinder Head Gaskets

Engine Mount Brackets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

O-Rings

Timing Cover Repair Sleeves

Main Bearing Repair Sleeves

Camshaft Timing Adjuster Magnets

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Water Connection Gaskets

Oil Pump Kits

Standard Piston Rings

Timing Chains

Balance Shaft Sprockets

Engine Valve Springs

Body Control Module Retainer

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Engine Valves

Standard Single Pistons

Timing Crank Gears

Expansion Plugs

Timing Dampers

Engine Cylinder Head Plugs

Engine Valve Locks

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Engine Assembly Lube

Engine Torque Strut Brackets

Turbocharger Boost Sensor Connectors

Engine Valve Cover O-Rings

Essential Engine Parts for 2004 Chevrolet Monte Carlos

from

$1912.99

Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$63.99

New Platinum Pro Oil Pan, 4 Quart, Without Oil Level Sensor Hole

Product Features:

4 Quart, Without Oil Level Sensor Hole
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$71.99

Carquest crankshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest crankshaft position sensors are a cost-effective solution for your engine management repair. Carquest crankshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$0.99

Engine Oil Dipstick Tube O-Ring

from

$20.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design for Unsurpassed quality you can trust
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$25.99

Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:

Extra Heavy-Duty Shaft That Will Provide The Necessary Reliability
Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
Alignment Sleeve Is Roll Formed Onto The Shaft (not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
Black Oxide

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$45.49

Mr. Gasket Timing Cover Kit is the finishing touch to dressing up your engine. This kit is for use with original equipment style timing chains only. Double roller type chains or gear drives require checking for adequate clearance. This kit includes everything you need, including the timing cover, bolts, front oil pan seal, front seal and water pump gaskets.

Product Features:

Fits Chevy Small Block 1955-1995
For Use With OEM Style Timing Chain Only
Chrome Plated Steel

from

$33.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$122.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$113.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$10.49

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$24.99

Captured Needle Thrust Bearing. 0.150″ Thick.

Product Features:

0.150″ Thick
Captured Needle Thrust Bearing.

from

$167.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$41.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$81.99

This engine mount bracket is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$20.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$88.99

High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$39.99

ACDelco GM Original Equipment Engine Oil Level Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$75.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Manufactured to meet or exceed OE requirements
Part is validated, tested and matched to the right vehicle application
Designed digital output for maximum signal to noise ratio
Designed and built using high temperature and corrosion resistant materials that perform exceptionally under all engine environments

from

$2.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

Anchor 2716 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2009
Weight approx: 1 Lbs
Insert Only

from

$0.51

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$64.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$67.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed bronze alloy lining with overplate
Popular for fatigue resistance & strength – provides conformability required for older applications
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$33.99

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$192.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf

Product Features:

25% Higher volume high performance upgrade of the M-55HV
CNC machined phosphate coated cast iron housing and cover
Patented billet steel shark tooth helical gears
Includes chrome moly steel intermediate drive shaft with pinned steel guide
Includes lower pressure spring; not installed
Uses 5/8 inch diameter press-fit screen

Upgrade your 2004 Chevrolet Monte Carlo with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2004 Chevrolet Monte Carlo, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Monte Carlo functioning at its best. At Advance Auto Parts, we offer a wide selection of 205 Engine Parts for the 2004 Chevrolet Monte Carlo, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2004 Chevrolet Monte Carlo at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $2,514.99, with an average price of $88.56. Our 205 Engine Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Monte Carlo without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Monte Carlo, we stock popular OEM and aftermarket Engine Parts from top names like Sealed Power, National, Dorman, and more. Sealed Power Engine Parts start at just $6.79 and boast an impressive 4.3 stars average rating from customers. National and Dorman also bring quality to the table, with Engine Parts available starting at $1.29, and at an average 4.3 stars rating. With 2,219 customer reviews and counting, our 2004 Chevrolet Monte Carlo Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Chevrolet Monte Carlo is always ready to roll. We’re committed to providing you with everything you need to keep your Monte Carlo in top shape, all in one place. Start shopping confidently below for your 2004 Chevrolet Monte Carlo!

Best-Selling Valve Cover and Cylinder Heads for 2004 Chevrolet Monte Carlos

Enhance the driving experience in your Chevrolet with 43 quality Valve Cover and Cylinder Head components, starting at $0.65.

show more show less

from

$22.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$6.79

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$15.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$149.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Unsurpassed quality you can trust

from

$37.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PermaTorque Severe Duty head gaskets are built to exceed all original equipment specifications
Application specific design to ensure a perfect fit
Features thicker high grade austenitic stainless steel armor
Sealing beads around coolant passages, specialized coatings and hot press flattening
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$77.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$37.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$171.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$14.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$18.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

PermaTorque head gaskets meets or exceeds all original equipment specifications
Requires no retorquing of the head bolts
Unsurpassed quality you can trust
Unsurpassed quality you can trust

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$2.99

from

$0.65

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$55.99

ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Adjusts the valves on your vehicle’s engine for proper performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$204.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$23.99

from

$3.29

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$64.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

Most Popular 2004 Chevrolet Monte Carlo Camshafts

Customize your Chevrolet with 12 Camshafts products like Camshaft Position Sensors, Camshaft Bearings, and Camshaft Position Sensor Connectors, all priced under $162.99.

show more show less

from

$162.99

This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$51.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
O-rings and seals are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$62.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$47.99

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$38.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$26.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$41.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$65.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$75.99

Manufactured to meet or exceed OE requirements
Part is validated, tested and matched to the right vehicle application
Designed digital output for maximum signal to noise ratio
Designed and built using high temperature and corrosion resistant materials that perform exceptionally under all engine environments

from

$65.99

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$50.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Not impacted by temperature changes and provide robust, long-lasting sensor protection
Designed digital output for maximum signal to noise ratio
All parts used in the manufacture process are Delphi validated
Not impacted by temperature changes and provide robust, long-lasting sensor protection

Top Picks for 2004 Chevrolet Monte Carlo Engine Timing Parts

Upgrade Chevrolet Monte Carlos with top-quality Engine Timing Parts parts, including 23 OEM and aftermarket selections for your 2004 model.

show more show less

from

$18.79

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$22.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$93.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components.

Product Features:

Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
Backed by Limited and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.

from

$411.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover.
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life.
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$55.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Links With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$26.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing damper is a component that helps maintain stability in timing chain systems. Cloyes engine timing dampers ensure proper synchronization and reduced vibration for proper engine function, optimal performance and longevity. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$15.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$125.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S848T Engine Timing Camshaft Sprocket (1 EA), S847 Engine Timing Crankshaft Sprocket (1 EA), C700 Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$146.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. SET INCLUDES: 9-5344 Engine Timing Damper (1 EA), C381A Engine Timing Chain (1 EA), S811 Engine Timing Crankshaft Sprocket (1 EA), S812T Engine Timing Camshaft Sprocket (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$143.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S812T Engine Timing Camshaft Sprocket (1 EA), S811 Engine Timing Crankshaft Sprocket (1 EA), C381A Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$141.99

ENGINE TIMING SET

from

$141.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain, Chain Tensioner

from

$131.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$86.99

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain, Chain Tensioner

from

$52.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$45.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$38.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$34.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$33.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$33.99

Gear Made From High Alloy Material. Features “Helical” Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.”

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$28.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$17.99

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

In-Demand Engine Mounts for 2004 Chevrolet Monte Carlos

Select from 7 premium Engine Mounts parts for your 2004 Chevrolet Monte Carlo, with prices ranging from $16.99 to $173.99.

show more show less

from

$31.99

Anchor 2866 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2009
Weight approx: 1 Lbs
Complete Mount

from

$16.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2009
Weight approx: 1 Lbs
Insert Only

from

$59.99

Anchor 3088 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1996-2009
Weight approx: 2 Lbs
Strut/Radiator Support
Part Group: 3088, 3088

from

$39.99

Anchor 2796 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1988-2005
Weight approx: 5 Lbs
Hydraulic

from

$53.99

Anchor 2901 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2005
Weight approx: 3 Lbs
Strut/Radiator Support
Part Group: 2901, 2901

from

$81.99

This engine mount bracket is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$173.99

GM Genuine Parts Engine Mount are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Most Sold 2004 Chevrolet Monte Carlo Engine Gaskets and Seals

Explore our best-selling Chevrolet parts for the 2004 Monte Carlo among 21 OEM and aftermarket options starting from $4.99.

show more show less

from

$27.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$29.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$32.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$73.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$12.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$52.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$36.49

GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$89.99

Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$33.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications
Zero engine leakage for late model vehicles.

from

$32.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Application specific molded rubber construction
Engineered cross section
Dana engineering-approved for fit, form and function

from

$5.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$4.99

MAHLEÂ® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Top-Rated Engine Parts Brands For Your 2004 Chevrolet Monte Carlo

Shop for the best-rated brands offering Engine Parts and other products for your 2004 Chevrolet Monte Carlos. Below you’ll find some of our best rated Engine Parts from Sealed Power, National, and Dorman, and more. Engine Parts from these brands that fit a 2004 Monte Carlo start at just $1.29 and are rated as high as 4.3 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Sealed Power 2004 Chevrolet Monte Carlo Engine Parts

When it comes to maintaining or upgrading your 2004 Chevrolet Monte Carlo, using quality Engine Parts is essential to ensure durability and a perfect fit. Sealed Power ticks all of those boxes. We offer a wide selection of Sealed Power Engine Parts, specifically designed for the 2004 Chevrolet Monte Carlo. With over 3 Sealed Power brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.79, with an average price of just $48.59. Plus, with over 4 customer reviews and an average rating of 4.3 stars, you can trust that our Sealed Power Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.79

(2)

Engine Push Rod

“OEM fit and replacement”

from $89.99

(1)

Engine Crankshaft Main Bearing Set

“The bearing fit perfectly”

from $48.99

(1)

Engine Connecting Rod Bearing Set

“Easy to install and perfect fit”

Popular National 2004 Chevrolet Monte Carlo Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2004 Chevrolet Monte Carlo owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2004 Monte Carlo, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Engine Parts range from $18.79 to $29.99, plus, with more than 12 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $29.99

(5)

Multi-Purpose Seal

“This is the correct fit rear extension housing seal for my 1969 FMX transmission in my 1969 Mercury Cougar. Finding the seal with the bushing is a plu”

from $18.79

(5)

Engine Harmonic Balancer Repair Sleeve

“Simple device. Durable. Easy to install”

from $20.99

(2)

Multi-Purpose Seal

“Wonderful”

FAQs for 2004 Chevrolet Monte Carlo Engine Parts

Which Engine Parts are best-sellers for 2004 Chevrolet Monte Carlos?

Out of 205 Engine Parts that fit 2004 Chevrolet Monte Carlos, the following parts are the top sellers:

Engine Valve Lifter (5681081) – $14.49
Fuel Injector O-Ring Kit (3504360) – $8.49
Engine Valve Lifter (12486346) – $24.99

What’s the price range for 2004 Chevrolet Monte Carlo Engine Parts?

Engine Part prices for the 2004 Chevrolet Monte Carlo start at $0.65 and go up to $2,514.99 for the most premium parts.

What’s the average price of a Engine Part for a 2004 Chevrolet Monte Carlo?

The average price for Engine Parts for the 2004 Chevrolet Monte Carlo is $88.56. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Monte Carlo model years?

Yes, we currently carry Engine Parts for 30 model years of Chevrolet Monte Carlos between 1970 and 2007. Engine Parts are bought most frequently for the following model years: 2007, 2006, 2005, 2003, 2002, 2001, 2000, 1999, and 1998.

What are the cheapest Engine Parts for my 2004 Chevrolet Monte Carlo?

The cheapest 2004 Chevrolet Monte Carlo Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (15680110) – $0.65
Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Steel Cup Expansion Plug 34.3mm, Height 0.497 (3492699) – $1.29
Steel Cup Expansion Plug 1-1/2 In., Height 0.220 (3492249) – $1.29
Steel Cup Expansion Plug 34.3mm, Height 0.497 (Sold by each) (16140166) – $1.79

What are the top-rated Engine Parts that fit the 2004 Chevrolet Monte Carlo?

Out of 2,219 reviews by customers, our 2004 Chevrolet Monte Carlo Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2004 Chevrolet Monte Carlo and their top-rated products:

Engine Gaskets and Seals
- TIMING COVER GASKET SET (15780074) – $22.99
- Engine Coolant Thermostat Housing Gasket (11138675) – $6.99
- Engine Valve Cover Gasket Set (5787629) – $27.99
Valve Cover and Cylinder Heads
- TIMING COVER GASKET SET (15780074) – $22.99
- Engine Coolant Thermostat Housing Gasket (11138675) – $6.99
- Engine Valve Cover Gasket Set (5787629) – $27.99

What types of Engine Parts do you sell for my 2004 Chevrolet Monte Carlo?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2004 Chevrolet Monte Carlo:

Can I get help with 2004 Chevrolet Monte Carlo Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Monte Carlo Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Monte Carlo Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Chevrolet Monte Carlo Engine Parts

Spartan – Engine Long Block; Chevrolet 3.1 93-95 Engine (Part No.DCD4)

KAI – Engine Oil Pan (Part No.PAN010041)

Carquest – Crankshaft Position Sensor (Part No.35C1008)

Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)

Felpro – Engine Coolant Crossover Pipe Mounting Set (Part No.ES 73027)

ARP Auto Racing – For Use With Chevy Big Block, 8740 Steel, 190000 Psi (Part No.135-7901)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Mr. Gasket – Timing Cover (Part No.4590)

Sealed Power – Engine Piston Set (Part No.H840NCP .50MM)

PowerBond – Street Performance Harmonic Balancer; 202mm Diameter (Part No.PB1046ST)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Felpro – Shaft Repair Sleeve (Part No.16228)

Cloyes Performance – Engine Camshaft Sprocket Thrust Bearing (Part No.9-220)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9071 PT-1)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA2288)

Dorman – Engine Mount Bracket (Part No.917-000)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 90505)

Cloyes Performance – High Performance Timing Chain (Part No.9-131)

GM Genuine Parts – Engine Oil Level and Temperature Sensor (Part No.213-3945)

Delphi – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.SS10687)

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt x 5/16 In. (Sold by each) (Part No.090-046)

Anchor – Torque Strut Motor Mount: Front Left, Front Right, Front, 1 Piece (Part No.2716)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-283)

Energy Suspension – Motor Mount (Part No.3.1117R)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.5085M 10)

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10630-01)

Melling Select Performance – High Performance High Volume Cast Iron Oil Pump (Part No.10550ST)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72833)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 74033)

Sealed Power – Engine Push Rod (Part No.RP-3331)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 71044)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9917 PT-3)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9918 PT)

Felpro – Head Gasket (Part No.541SD)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-967)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9071 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9071 PT-2)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Sealed Power – Engine Valve Lifter (Part No.HT-2270)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72892)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9917 PT)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Sealed Power – Engine Push Rod (Part No.RP-3340)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

ACDelco – Engine Hydraulic Valve Adjuster/Valve Lifter (Part No.HL124)

Sealed Power – Engine Valve Spring (Part No.VS-1628)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9089 PT-2)

Sealed Power – Engine Intake Valve (Part No.V-4571)

Dorman – Pipe Plug C.S. Square 3/8-18 NPT, Head Size 5/16 In. (Sold by each) (Part No.090-019)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-964)

Dorman – Cam Crank and Ignition Harness (Part No.645-688)

Sealed Power – Engine Camshaft Bearing Set (Part No.1492M)

Carquest Premium – Camshaft Position Sensor (Part No.CSC1131)

Carquest Premium – Camshaft Sensor (Part No.CSC1154)

Carquest – Engine Camshaft Position Sensor (Part No.35A1033)

Carquest Premium – Multi-Use Connector (Part No.PTA1125)

Sealed Power – Engine Camshaft Bearing Set (Part No.1889M)

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

NTK – Engine Camshaft Position Sensor (Part No.EC0242)

Delphi – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.SS10687)

NTK – Engine Camshaft Position Sensor (Part No.EC0054)

Delphi – Engine Camshaft Position Sensor (Part No.SS11369)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Multi-Purpose Seal (Part No.710162)

National – Engine Harmonic Balancer Kit (Part No.5000)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0381SA)

Dorman – Timing Cover Kit (Part No.635-516)

Cloyes Gear – Engine Timing Chain (Part No.C381A)

Cloyes Gear – Engine Timing Damper (Part No.9-5344)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Cloyes Gear – Engine Timing Set (Part No.C-3221)

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0381SB)

Cloyes Gear – Engine Timing Set (Part No.C-3215)

INA US – ENGINE TIMING SET (Part No.ZC-9-0381SA)

Dayco – TIMING CHAIN KIT (Part No.KTC1459)

Dayco – TIMING CHAIN KIT (Part No.KTC1429)

Dayco – TIMING CHAIN KIT (Part No.KTC1105)